{"title":"Water-Based Products","description":"","products":[{"product_id":"water-based-clear-wood-turners-top-coat-general-finishes","title":"General Finishes Water Based Clear Wood Turners Top Coat","description":"\u003cspan\u003eWood Turner's Finish is a water-oil urethane hybrid for use on wood turnings, salad bowls and other lathe-turned projects. This water-based wood finish produces a slight amber tone and dries to recoat in minutes.\u003c\/span\u003e","brand":"General Finishes","offers":[{"title":"8 oz \/ Gloss","offer_id":8114237735031,"sku":"GF-8WTF","price":18.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/7892\/products\/8wtf.jpg?v=1577706284"},{"product_id":"water-based-wiping-stain-general-finishes","title":"General Finishes Water Based Wiping Stain","description":"\u003c!-- Start: Stain Description -----------------------------------------------\u003e\n\u003cp\u003eGeneral Finishes Water Based Wood Stains are formulated to provide workability similar to oil-based stains. They spread easily, can be repaired and have plenty of open time. The thicker formula of these wood stains allows for controlled penetration. Their high-quality pigments produce rich, dark, uniform colors on hard-to-stain woods like maple and pine. Our wiping wood stains are low odor, low VOC, water cleanup and noncombustible.\u003c\/p\u003e\n\u003cp\u003ePlease click the below headers to reveal the instructional info for this product.\u003c\/p\u003e\n\u003c!-- Start Accordian: Instructions -----------------------------------------------\u003e\n\u003cdiv\u003e\n\u003c!-- Step 1: Prep for Stain---------------------------------------------------\u003e\n\u003carticle\u003e\n\u003ch4\u003eStep 1: Preparation for Water-Based Wood Stain\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cp\u003eBefore applying stain, all raw wood projects require preparation sanding, and all existing finishes require prep cleaning and sanding. If you skip this critical step, your finish may fail.\u003c\/p\u003e\n\u003ch4\u003ePreparation for Raw Wood Projects\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eSand open-grain wood (e.g., oak, ash, mahogany, parawood) with 120-grit sandpaper, followed by 150-grit, then 180-grit.\u003c\/li\u003e\n\u003cli\u003eSand closed-grain wood (e.g., cherry, pine, maple, birch, alder) with 150-grit sandpaper followed by 220-grit.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eDo not over-sand with fine-grit sandpapers; this will close and seal the wood grain, preventing ideal color absorption.\u003c\/li\u003e\n\u003cli\u003eDo NOT use steel wool with water-based finishes; the particles will get trapped in the finish and rust.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eReducing Grain Raise on Raw Wood\u003c\/h4\u003e\n\u003cp\u003eTo reduce grain raise, dampen the wood with water after prep sanding. Let dry completely, then lightly sand with fine-grade (220-320) foam sanding pad.\u003c\/p\u003e\n\u003ch4\u003ePreparation for Projects with an Existing Finish\u003c\/h4\u003e\n\u003cp\u003eFor high-use areas with heavy grime build-up and oil from hands, give your project a deeper cleaning.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eScuff clean with a Scotch-Brite™ pad or maroon synthetic steel wool and a 50:50 mix of denatured alcohol and water. Avoid cleaning with products containing phosphates (salt), which can linger in the substrate and produce a white haze. If your project requires a deeper cleaning, see Power Prep Cleaning Highly Used Existing Finishes below.\u003c\/li\u003e\n\u003cli\u003eDry 1-2 hours.\u003c\/li\u003e\n\u003cli\u003eSand lightly with a fine-grade (220-320-grit) foam sanding sponge or 400-grit sandpaper.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003cli\u003eLet dry completely before applying General Finishes product.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003ePower Prep Cleaning Highly Used Existing Finishes\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eScrub clean with a detergent, such as Spic and Span or Dawn, using a Scotch Brite™ pad.\u003c\/li\u003e\n\u003cli\u003eRinse well with water.\u003c\/li\u003e\n\u003cli\u003eScrub clean with a Scotch Brite™ pad and a 50:50 mix of denatured alcohol and water. Dry 1-2 hours.\u003c\/li\u003e\n\u003cli\u003eSand lightly with a fine-grade (220-320) foam sanding pad.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003cli\u003eLet dry completely before applying General Finishes product.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eAlternative Cleaning Solutions for Existing Finishes (Not as aggressive or effective as denatured alcohol; requires rinsing.)\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003e50:50 mix of bleach and water\u003c\/li\u003e\n\u003cli\u003e50:50 mix of vinegar and water\u003c\/li\u003e\n\u003cli\u003eMineral spirits can be used when working with water-based products, but only if the surface is thoroughly rinsed and allowed to dry for 72 hours.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c!--\/.accordion-content--\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- End: Accordian Step 1 -----------------------------------------------\u003e \u003c!-- Step 2: How to Apply Stain ------------------------------------------\u003e\n\u003carticle\u003e\n\u003ch4\u003eStep 2: How to Apply General Finishes Water-Based Wood Stain\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003ch4\u003eGeneral Finishes Water Based Wood Stain Application Steps\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eWork in a well-ventilated area.\u003c\/li\u003e\n\u003cli\u003eStir stain to reincorporate solids that have settled to the bottom of the can before and throughout the application process.\u003c\/li\u003e\n\u003cli\u003eThin as desired with distilled water; start with 5%, adding up to 10% by volume.\u003c\/li\u003e\n\u003cli\u003eIncrease open time, if needed, with up to 5% \u003ca href=\".\/water-based-extender-general-finishes-additives\"\u003eGeneral Finishes Extender\u003c\/a\u003e if allowed by local regulations. \u003ca href=\".\/water-based-extender-general-finishes-additives\"\u003eGF Extender\u003c\/a\u003e will improve flow and leveling and increase open time, which is helpful in dry climates. California Residents: Adding more than 2% of \u003ca href=\".\/water-based-extender-general-finishes-additives\"\u003eGF Extender\u003c\/a\u003e will make the products non-compliant per SCAQMD Regulations. GF assumes no liability for the improper use of these products.\u003c\/li\u003e\n\u003cli\u003eAn initial coat of General Finishes Pre-Stain Conditioner Natural can improve color uniformity over difficult-to-stain wood species such as pine. However, it will limit color absorption, so a darker stain may be required to get the depth of color you want.\u003c\/li\u003e\n\u003cli\u003eTest your complete finishing process beforehand. Stain color can be affected by variances in wood, room lighting, and deepened with the application of topcoat.\u003c\/li\u003e\n\u003cli\u003eSurface preparation is essential. See \"Step 1: Preparation for Water Based Wood Stain.\"\u003c\/li\u003e\n\u003cli\u003eDivide your project into manageable sections: top, side, drawer, door, table seam.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eHand-Application over Raw Wood\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eApply a LIBERAL amount of stain to ensure easy workability using a synthetic bristle brush, foam brush, pad applicator or roller. Work quickly. If not enough stain is used, the surface may dry too quickly, causing an uneven appearance. On large projects, leave a wet edge between sections to prevent lap lines.\u003c\/li\u003e\n\u003cli\u003eStain one complete section at a time.\u003c\/li\u003e\n\u003cli\u003eWipe off the excess evenly with the grain using cloth or an absorbent paper towel. Check for missed spots and lap marks before moving to the next section. Do NOT use cotton t-shirts to wipe away stain because they will \"push\" the stain around and not absorb it.\u003c\/li\u003e\n\u003cli\u003ePull excess stain out of corners and details with a synthetic bristle brush.\u003c\/li\u003e\n\u003cli\u003eImmediately correct lap marks by rewetting the entire working area with stain and wiping off the excess.\u003c\/li\u003e\n\u003cli\u003eLet the stain dry 2+ hours in ideal conditions: 50-70% humidity, 70°F\/20°C before adding a second coat (optional) and before adding topcoat. Be sure to allow adequate dry time. If in doubt, wait longer. Increase dry time if:\n\u003cul\u003e\n\u003cli\u003eHumidity is over 80%\u003c\/li\u003e\n\u003cli\u003e3+ coats are applied (not recommended)\u003c\/li\u003e\n\u003cli\u003eThick coats are applied\u003c\/li\u003e\n\u003cli\u003eTo accelerate dry time in humid conditions, add General Finishes Accelerator before applying and work in a space with good ventilation and air movement. If you decide to re-coat before the recommended time, test dryness.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpray Application over Raw Wood\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBefore spraying, strain topcoat through a fine-mesh filter.\u003c\/li\u003e\n\u003cli\u003eSafety: Wear a full filter respirator (NIOSH\/MSHA-approved) and work in a ventilated space.\u003c\/li\u003e\n\u003cli\u003eSpray wet films at 3-5-mil thickness. HVLP: 1.1mm-1.3mm spray tip, medium air cap. Verify tip sizes with your equipment supplier. Keep your gun at a 90° angle, 6-8\" from the surface. On large, flat areas, use wet, even patterns 6-8\" wide. For narrow surfaces, reduce the fan pattern to 2-3\" wide to reduce overspray. Overlap each pass 25-50% for even coverage. Spray a LIBERAL amount of stain to ensure easy workability. If not enough stain is used, the surface may dry too quickly, causing an uneven appearance. On large projects, leave a wet edge between sections to prevent lap lines during application.\u003c\/li\u003e\n\u003cli\u003ePull excess stain out of corners and details with a bristle brush.\u003c\/li\u003e\n\u003cli\u003eImmediately correct lap marks by rewetting the entire working area with stain and wiping off the excess.\u003c\/li\u003e\n\u003cli\u003eLet the stain dry 2+ hours in ideal conditions: 50-70% humidity, 70°F\/20°C before adding a second coat (optional) and before adding topcoat. Be sure to allow adequate dry time. If in doubt, wait longer. Increase dry time if:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eHumidity is over 80%\u003c\/li\u003e\n\u003cli\u003e3+ coats are applied (not recommended)\u003c\/li\u003e\n\u003cli\u003eThick coats are applied\u003c\/li\u003e\n\u003cli\u003eTo accelerate dry time in humid conditions, add General Finishes Accelerator before applying and work in a space with good ventilation and air movement. If you decide to re-coat before the recommended time, test dryness.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eHand-Application over Existing Finish\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eStir contents well.\u003c\/li\u003e\n\u003cli\u003ePrepare surface well. See Existing Finish Prep instructions in \"Step 1: Preparation for Water Based Wood Stain.\"\u003c\/li\u003e\n\u003cli\u003eApply stain with a foam brush or paint pad. Feather out uneven areas and pull excess stain from corners using a bristle brush. Discharge accumulated stain from the brush onto a dry paper towel as you work.\u003c\/li\u003e\n\u003cli\u003eLet the stain dry 2+ hours before GF water-based topcoat in ideal conditions: 50-70% humidity, 70*F\/20*C before applying a second coat (optional) and before applying topcoat. Be sure to allow adequate dry time. If in doubt, wait longer. Increase dry time if:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eHumidity is over 80%\u003c\/li\u003e\n\u003cli\u003e3+ coats are applied (not recommended)\u003c\/li\u003e\n\u003cli\u003eThick coats are applied\u003c\/li\u003e\n\u003cli\u003eApplying over products from other brands\u003c\/li\u003e\n\u003cli\u003eLayering General Finishes water- and oil-based products:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eWater over oil: Let oil-based products dry 72+hr before applying water-based products\u003c\/li\u003e\n\u003cli\u003eOil over water: Let water-based products dry 24+hr before applying oil-based products\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eTo accelerate dry time in humid conditions, add General Finishes Accelerator before applying and work in a space with good ventilation and air movement. If you decide to re-coat before the recommended time, test dryness.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eTopcoat is required. Finish with 3 coats of General Finishes topcoat. See \"Step 3: Topcoat Over Water-Based Stain.\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!--\/.accordion-content--\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- End: Accordian Step 2 -----------------------------------------------\u003e \u003c!-- Step 3: Topcoat Over Stain ---------------------------------------------------\u003e\n\u003carticle\u003e\n\u003ch4\u003eStep 3: Topcoat Over Water-Based Stain\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cp\u003eAlways seal General Finishes Water Based Wood Stain, General Finishes Dye Stain and General Finishes Enduro Ready-To-Match (RTM) Water Based Wood Stain with 3 coats of topcoat. More coats will not improve durability.\u003c\/p\u003e\n\u003ch4\u003eRecommended Water-Based Topcoats\u003c\/h4\u003e\n\u003cp\u003eGeneral Finishes High Performance can be applied by hand or sprayed; General Finishes Enduro Clear Poly is spray-only. Both topcoats dry clear and are great for high-use surfaces, such as kitchen cabinets and tabletops. General Finishes Flat Out Flat is our flattest topcoat, suitable for projects that do not receive major wear.\u003c\/p\u003e\n\u003ch4\u003eRecommended Oil-Based Topcoats\u003c\/h4\u003e\n\u003cp\u003eWhen sealing with General Finishes oil-based topcoats, General Finishes Arm-R-Seal and General Finishes Gel Topcoat, let water-based stain dry a minimum of 24 hours first. Oil-based topcoats amber increasingly over time.\u003c\/p\u003e\n\u003c!--\/.accordion-content--\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- End: Accordian Step 3 -----------------------------------------------\u003e \u003c!-- Supporting Videos ---------------------------------------------------\u003e\n\u003carticle\u003e\n\u003ch4\u003eSupporting Instructional Videos\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-6 col-md-6 text-center\"\u003e\n\u003cdiv class=\"video-wrapper\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/--s06MkEkoU\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-lg-6 col-md-6 text-center\"\u003e\n\u003cdiv class=\"video-wrapper\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/sR9K4LlVRJA\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-lg-6 col-md-6 text-center\"\u003e\n\u003cdiv class=\"video-wrapper\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/fvo03tmO7YA\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-lg-6 col-md-6 text-center\"\u003e\n\u003cdiv class=\"video-wrapper\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/ZtQgfVA0uxo\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-lg-6 col-md-6 text-center\"\u003e\n\u003cdiv class=\"video-wrapper\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/REr52AZYE2w\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-lg-6 col-md-6 text-center\"\u003e\n\u003cdiv class=\"video-wrapper\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/7QnrhELTJkc\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!--\/.accordion-content--\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- End: Supporting Videos -----------------------------------------------\u003e\n\u003c\/div\u003e\n\u003c!-- End Accordian: Instructions -----------------------------------------------\u003e","brand":"General Finishes","offers":[{"title":"Quart \/ Whitewash","offer_id":8114237767799,"sku":"GF-WSWHQ","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Pint \/ Whitewash","offer_id":8114237800567,"sku":"GF-WSWHP","price":25.5,"currency_code":"USD","in_stock":false},{"title":"Gallon \/ Whitewash","offer_id":8114237833335,"sku":"GF-WSWHG","price":88.0,"currency_code":"USD","in_stock":true},{"title":"Quart \/ Walnut","offer_id":8114237964407,"sku":"GF-WSWNQ","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Pint \/ Walnut","offer_id":8114237997175,"sku":"GF-WSWNP","price":25.5,"currency_code":"USD","in_stock":false},{"title":"Gallon \/ Walnut","offer_id":8114238029943,"sku":"GF-WSWNG","price":88.0,"currency_code":"USD","in_stock":true},{"title":"Quart \/ Pecan","offer_id":8114238259319,"sku":"GF-WSPQ","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Pint \/ Pecan","offer_id":8114238292087,"sku":"GF-WSPP","price":25.5,"currency_code":"USD","in_stock":false},{"title":"Gallon \/ Pecan","offer_id":8114238324855,"sku":"GF-WSPG","price":88.0,"currency_code":"USD","in_stock":true},{"title":"Quart \/ Espresso","offer_id":8114238554231,"sku":"GF-WSEQ","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Pint \/ Espresso","offer_id":8114238586999,"sku":"GF-WSEP","price":25.5,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Espresso","offer_id":8114238619767,"sku":"GF-WSEG","price":88.0,"currency_code":"USD","in_stock":true},{"title":"Quart \/ Brown Mahogany","offer_id":8114238849143,"sku":"GF-WSBMQ","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Pint \/ Brown Mahogany","offer_id":8114238881911,"sku":"GF-WSBMP","price":25.5,"currency_code":"USD","in_stock":false},{"title":"Gallon \/ Brown Mahogany","offer_id":8114238914679,"sku":"GF-WSBMG","price":88.0,"currency_code":"USD","in_stock":true},{"title":"Quart \/ Black","offer_id":8114238947447,"sku":"GF-WSBQ","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Pint \/ Black","offer_id":8114238980215,"sku":"GF-WSBP","price":25.5,"currency_code":"USD","in_stock":false},{"title":"Gallon \/ Black","offer_id":8114239012983,"sku":"GF-WSBG","price":88.0,"currency_code":"USD","in_stock":true},{"title":"Quart \/ Black Cherry","offer_id":8114239045751,"sku":"GF-WSBCQ","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Pint \/ Black Cherry","offer_id":8114239078519,"sku":"GF-WSBCP","price":25.5,"currency_code":"USD","in_stock":false},{"title":"Gallon \/ Black Cherry","offer_id":8114239111287,"sku":"GF-WSBCG","price":88.0,"currency_code":"USD","in_stock":true},{"title":"Quart \/ Antique Oak","offer_id":8114239144055,"sku":"GF-WSAOQ","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Pint \/ Antique Oak","offer_id":8114239176823,"sku":"GF-WSAOP","price":25.5,"currency_code":"USD","in_stock":false},{"title":"Gallon \/ Antique Oak","offer_id":8114239209591,"sku":"GF-WSAOG","price":88.0,"currency_code":"USD","in_stock":true},{"title":"Pint \/ Graystone","offer_id":30326885384259,"sku":"GF-WSGSP","price":25.5,"currency_code":"USD","in_stock":false},{"title":"Quart \/ Graystone","offer_id":30326885417027,"sku":"GF-WSGSQ","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Graystone","offer_id":30326885449795,"sku":"GF-WSGSG","price":88.0,"currency_code":"USD","in_stock":true},{"title":"Pint \/ Sedona","offer_id":30326885482563,"sku":"GF-WSSDP","price":25.5,"currency_code":"USD","in_stock":false},{"title":"Quart \/ Sedona","offer_id":30326885515331,"sku":"GF-WSSDQ","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Sedona","offer_id":30326885548099,"sku":"GF-WSSDG","price":88.0,"currency_code":"USD","in_stock":true},{"title":"Pint \/ Hickory","offer_id":30326885580867,"sku":"GF-WSHP","price":25.5,"currency_code":"USD","in_stock":false},{"title":"Quart \/ Hickory","offer_id":30326885613635,"sku":"GF-WSHQ","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Hickory","offer_id":30326885646403,"sku":"GF-WSHG","price":88.0,"currency_code":"USD","in_stock":true},{"title":"Pint \/ Antique Brown","offer_id":30326885679171,"sku":"GF-WSABP","price":25.5,"currency_code":"USD","in_stock":false},{"title":"Quart \/ Antique Brown","offer_id":30326885711939,"sku":"GF-WSABQ","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Antique Brown","offer_id":30326885744707,"sku":"GF-WSABG","price":88.0,"currency_code":"USD","in_stock":true},{"title":"Pint \/ Provincial","offer_id":30326885777475,"sku":"GF-WSPRP","price":25.5,"currency_code":"USD","in_stock":false},{"title":"Quart \/ Provincial","offer_id":30326885810243,"sku":"GF-WSPRQ","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Provincial","offer_id":30326885843011,"sku":"GF-WSPRG","price":88.0,"currency_code":"USD","in_stock":true},{"title":"Pint \/ Cabernet","offer_id":30326885875779,"sku":"GF-WSCAP","price":25.5,"currency_code":"USD","in_stock":false},{"title":"Quart \/ Cabernet","offer_id":30326885908547,"sku":"GF-WSCAQ","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Cabernet","offer_id":30326885941315,"sku":"GF-WSCAG","price":88.0,"currency_code":"USD","in_stock":true},{"title":"Pint \/ Tobacco","offer_id":30326885974083,"sku":"GF-WSTP","price":25.5,"currency_code":"USD","in_stock":false},{"title":"Quart \/ Tobacco","offer_id":30326886006851,"sku":"GF-WSTQ","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Tobacco","offer_id":29680628891715,"sku":"GF-WSTG","price":88.0,"currency_code":"USD","in_stock":true},{"title":"Pint \/ Graphite","offer_id":30326886039619,"sku":"GF-WSGPP","price":25.5,"currency_code":"USD","in_stock":true},{"title":"Quart \/ Graphite","offer_id":30326886072387,"sku":"GF-WSGPQ","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Graphite","offer_id":30326886105155,"sku":"GF-WSGPG","price":88.0,"currency_code":"USD","in_stock":true},{"title":"Pint \/ Onyx","offer_id":30326886137923,"sku":"GF-WSONP","price":25.5,"currency_code":"USD","in_stock":true},{"title":"Quart \/ Onyx","offer_id":30326886170691,"sku":"GF-WSONQ","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Onyx","offer_id":30326886203459,"sku":"GF-WSONG","price":88.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/7892\/products\/wiqt.png?v=1577706333"},{"product_id":"white-water-based-poly-top-coat-general-finishes","title":"General Finishes White Water Based Poly Top Coat","description":"\u003c!-- Start: Topcoat Description -----------------------------------------------\u003e\n\u003cp\u003eEnduro Pigmented White Poly is a high-solids, pigmented water-based wood finish engineered for cabinets and millwork. Use only over General Finishes \u003ca href=\".\/white-water-based-primer-general-finishes\"\u003eWhite Undercoat\u003c\/a\u003e or \u003ca href=\".\/stain-blocker-water-based-primer-general-finishes\"\u003eStain Blocker\u003c\/a\u003e. Stocked in Black and White, custom colors are available to wholesale customers upon request. White and Clear can be used as tint bases to achieve endless colors. For non-architectural use.\u003c\/p\u003e\n\u003cp\u003ePlease click the below headers to reveal the instructional info for this General Finishes White poly paint product.\u003c\/p\u003e\n\u003c!-- Start Accordian: Instructions -----------------------------------------------\u003e\n\u003cdiv\u003e\n\u003c!-- Step 1: Preparation of White Poly ---------------------------------------------------\u003e\n\u003carticle\u003e\n\u003ch4\u003eStep 1: Preparation for White Poly\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cp\u003eAll wood projects require preparation sanding, and all existing finishes require prep cleaning and sanding. If you skip this critical step, your finish may fail.\u003c\/p\u003e\n\u003ch4\u003ePreparation for Raw Wood or Raw Wood Projects That Are to be Stained\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eSanding Schedule: 120-grit followed by 150- or 220-grit sandpaper.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003cli\u003eLet dry completely before applying GF product.\u003c\/li\u003e\n\u003cli\u003eDo not over-sand with fine-grit sandpapers; this will close and seal the wood grain, preventing ideal color absorption.\u003c\/li\u003e\n\u003cli\u003eDo NOT use steel wool with water-based finishes; the particles will get trapped in the finish and rust.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003ePreparation for Projects with an Existing Finish (Sealed Surface)\u003c\/h4\u003e\n\u003cp\u003eFor high-use areas with heavy grime build-up and oil from hands, give your project a deeper cleaning.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eScuff clean with a Scotch Brite™ pad and a 50:50 mix of denatured alcohol and water. Dry 1-2 hours. Avoid cleaning with products containing phosphates (salt), which can linger in the substrate and produce a white haze. If your project requires a deeper cleaning, see Power Prep Cleaning Highly Used Existing Finishes below.\u003c\/li\u003e\n\u003cli\u003eSand lightly with a fine-grade (220-320) foam sanding pad.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003cli\u003eLet dry completely before applying General Finishes product.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003ePower Prep Cleaning Highly Used Existing Finishes\u003c\/h4\u003e\n\u003cp\u003eFor high-use areas such as kitchen cabinets or table tops with heavy grime build-up and oil from hands, give your project a \"Power\" clean.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eScrub clean with a detergent, such as Spic and Span or Dawn, using a Scotch Brite™ pad.\u003c\/li\u003e\n\u003cli\u003eRinse well with water.\u003c\/li\u003e\n\u003cli\u003eScrub clean with a Scotch Brite™ pad and a 50:50 mix of denatured alcohol and water. Dry 1-2 hours.\u003c\/li\u003e\n\u003cli\u003eSand lightly with a fine-grade (220-320) foam sanding pad.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003cli\u003eLet dry completely before applying General Finishes product.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eAlternative Cleaning Solutions For Existing Finishes (Not as aggressive or effective as denatured alcohol; requires rinsing.)\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e50:50 mix of bleach and water\u003c\/li\u003e\n\u003cli\u003e50:50 mix of vinegar and water\u003c\/li\u003e\n\u003cli\u003eMineral spirits can be used when working with water-based products, but only if the surface is thoroughly rinsed and allowed to dry for 72 hours.\u003c\/li\u003e\n\u003cli\u003eIf you use with products containing phosphates (salt), which can linger in the substrate and produce a white haze, be sure to rinse thoroughly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!--\/.accordion-content--\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- End: Accordian Step 1 -----------------------------------------------\u003e \u003c!-- Step 2: How to Prime White Poly ------------------------------------------\u003e\n\u003carticle\u003e\n\u003ch4\u003eStep 2: Priming for General Finishes White Poly\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eCAUTION:\u003c\/strong\u003e Do NOT use any type of clear topcoat over GF \u003ca href=\".\/clear-water-based-poly-top-coat-general-finishes\"\u003eClear Poly\u003c\/a\u003e, as it may cause yellowing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCAUTION:\u003c\/strong\u003e General Finishes Enduro White Poly is engineered to adhere well to raw wood, General Finishes \u003ca href=\".\/white-water-based-primer-general-finishes\"\u003eWhite Undercoat\u003c\/a\u003e and \u003ca href=\".\/stain-blocker-water-based-primer-general-finishes\"\u003eStain Blocker\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eWhen working over raw wood, 2 coats of either \u003ca href=\".\/stain-blocker-water-based-primer-general-finishes\"\u003eStain Blocker\u003c\/a\u003e or \u003ca href=\".\/white-water-based-primer-general-finishes\"\u003eWhite Undercoat\u003c\/a\u003e MUST be applied before applying Enduro White Poly to prevent tannin bleed through and ensure a successful outcome. Both work very well but \u003ca href=\".\/stain-blocker-water-based-primer-general-finishes\"\u003eStain Blocker\u003c\/a\u003e will achieve a slightly brighter sustained white.\u003c\/p\u003e\n\u003cp\u003eWhen working over an existing finish, 2 coats of Stain Blocker MUST be applied before applying Enduro White Poly to prevent tannin bleed through, improve adhesion and ensure a successful outcome.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eaw Wood Tannin Bleed-Through is unpredictable; yellowing can appear immediately or months later with seasonal temperature changes. Oak, pine, mahogany, and Douglas fir are particularly prone to bleed-through.\u003c\/li\u003e\n\u003cli\u003eKnots in Wood tend to bleed and are dense, making paint adhesion a challenge. \u003ca href=\".\/stain-blocker-water-based-primer-general-finishes\"\u003eStain Blocker\u003c\/a\u003e may improve adhesion and prevent bleed-through.\u003c\/li\u003e\n\u003cli\u003eExisting Finishes Bleed-Through may be caused by wood tannins, previous stains or aniline dyes, surface contamination, and incompatibility between brands. ALWAYS apply 2 coats General Finishes \u003ca href=\".\/stain-blocker-water-based-primer-general-finishes\"\u003eStain Blocker\u003c\/a\u003e before applying Enduro White Poly over an existing finish for adhesion and to prevent bleed-through.\u003c\/li\u003e\n\u003cli\u003eNon-Wood Surfaces may be able to take paint if primed first. Primer may improve adhesion over laminate and prevent bleed-through from MDF. Metal requires a primer made specifically for metal. Always test first before completing your entire project.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eNOTE: Do not tint or use General Finishes \u003ca href=\".\/stain-blocker-water-based-primer-general-finishes\"\u003eStain Blocker\u003c\/a\u003e on projects that will be stored outdoors.\u003c\/p\u003e\n\u003ch4\u003ePriming Non-Wood Surfaces for Paint\u003c\/h4\u003e\n\u003cp\u003eAlways test for adhesion on a hidden area of your project before getting started.\u003c\/p\u003e\n\u003cp\u003eMetal: Enduro Pigmented White Poly is engineered for wood surfaces, but may adhere to metal, such as aluminum or steel, if a metal primer is applied first.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eClean the surface well.\u003c\/li\u003e\n\u003cli\u003eApply primer.\u003c\/li\u003e\n\u003cli\u003eDry 48-72 hours before painting.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eLaminate: Enduro Pigmented White Poly MAY adhere to laminate with a bonding primer; however, we cannot guarantee it. You may increase your chances of success by abrading the surface.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ePrep: Deep clean, dry thoroughly, sand with 150- then 180-grit sandpaper, and wipe off dust.\u003c\/li\u003e\n\u003cli\u003ePrime: Apply bonding primer, dry 12+ hours before painting.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eMDF: Enduro Pigmented White Poly can be applied directly to MDF, but the MDF may cast a brown color if not primed first. Two base coats of white-pigmented shellac-based stain-blocking primer, or \u003ca href=\".\/stain-blocker-water-based-primer-general-finishes\"\u003eStain Blocker\u003c\/a\u003e, may prevent bleed-through. Alternatively, one base coat of General Finishes \u003ca href=\".\/water-based-milk-paint-general-finishes-specialty-coatings?variant=8114242846839\"\u003eSeagull Gray Milk Paint\u003c\/a\u003e may block brown tone caused by MDF.\u003c\/p\u003e\n\u003ch4\u003eDisclaimer\u003c\/h4\u003e\n\u003cp\u003eAlthough \u003ca href=\".\/stain-blocker-water-based-primer-general-finishes\"\u003eStain Blocker\u003c\/a\u003e is engineered to prevent the most persistent bleed-through when 2 coats are applied, General Finishes cannot guarantee prevention of bleed-through or yellowing on every project. Unknown factors and assiduous bleed-through can impact results. \u003ca href=\".\/stain-blocker-water-based-primer-general-finishes\"\u003eStain Blocker\u003c\/a\u003e is the strongest option we are aware of at this time and has performed extremely well in our tests.\u003c\/p\u003e\n\u003c!--\/.accordion-content--\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- End: Accordian Step 2 -----------------------------------------------\u003e \u003c!-- Step 3: How to Apply White Poly ---------------------------------------------------\u003e\n\u003carticle\u003e\n\u003ch4\u003eStep 3: How To Apply General Finishes White Poly\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eCAUTION:\u003c\/strong\u003e Do NOT use any type of clear topcoat over GF \u003ca href=\".\/clear-water-based-poly-top-coat-general-finishes\"\u003eClear Poly\u003c\/a\u003e, as it may cause yellowing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCAUTION:\u003c\/strong\u003e General Finishes Enduro White Poly is engineered to adhere well to raw wood, General Finishes \u003ca href=\".\/white-water-based-primer-general-finishes\"\u003eWhite Undercoat\u003c\/a\u003e and \u003ca href=\".\/stain-blocker-water-based-primer-general-finishes\"\u003eStain Blocker\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eWhen working over raw wood, 2 coats of either \u003ca href=\".\/stain-blocker-water-based-primer-general-finishes\"\u003eStain Blocker\u003c\/a\u003e or \u003ca href=\".\/white-water-based-primer-general-finishes\"\u003eWhiteUndercoat\u003c\/a\u003e MUST be applied before applying Enduro White Poly to prevent tannin bleed through and ensure a successful outcome. Both work very well but \u003ca href=\".\/stain-blocker-water-based-primer-general-finishes\"\u003eStain Blocker\u003c\/a\u003e will achieve a slightly brighter sustained white.\u003c\/p\u003e\n\u003cp\u003eWhen working over an existing finish, 2 coats of Stain Blocker MUST be applied before applying Enduro White Poly to prevent tannin bleed through, improve adhesion and ensure a successful outcome.\u003c\/p\u003e\n\u003ch4\u003eGeneral Finishes Enduro White Poly Application Steps\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eStir to reincorporate solids that have settled to the bottom of the can before and throughout the application process.\u003c\/li\u003e\n\u003cli\u003eThin as desired with distilled water; start with 5%, increase up to 10% by volume.\u003c\/li\u003e\n\u003cli\u003eIncrease open time, if needed, with up to 5% General Finishes Extender if allowed by local regulations. \u003ca href=\".\/water-based-extender-general-finishes-additives\"\u003eGF Extender\u003c\/a\u003e will improve flow and leveling and increase open time, which is helpful in dry climates. \u003cstrong\u003eCalifornia Residents:\u003c\/strong\u003eAdding more than 2% of GF Extender will make the products non-compliant per SCAQMD Regulations. GF assumes no liability for the improper use of these products.\u003c\/li\u003e\n\u003cli\u003eApply 3 coats. Additional coats will not improve durability.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eSpray application: Before spraying, strain through a medium-mesh filter. Spray wet films at 3-5-mil thickness. HVLP: 1.3mm-1.5mm spray tip, medium air cap. Verify tip sizes with your equipment supplier. \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0062\/7892\/files\/gf-hvlp-spray-tip-sizes.pdf?13835\"\u003eSee our general guide for spray tip sizes\u003c\/a\u003e. Keep your gun at a 90° angle,6-8\" from the surface. On large, flat areas, use wet, even patterns6-8\" wide. For narrow surfaces, reduce the fan pattern to 2-3\" wide to reduce overspray. Overlap each pass 25% to conceal lines. Wear a mask and work in a ventilated space.\u003c\/li\u003e\n\u003cli\u003eFace frames: Enduro professional products are engineered to be spray-only but can be successfully applied successfully to cabinet face frames, edges or drawer fronts with a small cabinet-specific 3\/8\" nap microfiber roller such as Whizz or AllPro brand. Larger areas may not level with a roller application. Add 10-20% Extender for improved results.\u003c\/li\u003e\n\u003cli\u003eIf a faster build is desired over raw wood, use \u003ca href=\".\/water-based-sanding-sealer-general-finishes\"\u003eGeneral Finishes Sanding Sealer\u003c\/a\u003e for the first coat, followed by 2 coats of White Poly.\u003c\/li\u003e\n\u003cli\u003eDry time in ideal conditions: 70°F\/20°C; 50-70% humidity. Tack free 5-10 minutes. Ready to sand 30-45 minutes. Recoat in 1-2 hours. Be sure to allow adequate dry time. You can tell if a water-based finish is dry if it forms a powder when lightly sanded with a fine-grade (220-320) foam sanding pad. If in doubt, wait longer. Rushing the dry time can cause \"blush,\" which is clouding in the finish due to moisture trapped between the layers. Increase dry time if:\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eHumidity is over 80%\u003c\/li\u003e\n\u003cli\u003e3+ coats are applied\u003c\/li\u003e\n\u003cli\u003eThick coats are applied\u003c\/li\u003e\n\u003cli\u003eApplying over an existing sealed finish\u003c\/li\u003e\n\u003cli\u003eApplying over products from other brands\u003c\/li\u003e\n\u003cli\u003eLayering General Finishes water- and oil-based products:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eWater over oil: Let oil-based products dry 72+hr before applying water-based products\u003c\/li\u003e\n\u003cli\u003eOil over water: Let water-based products dry 24+hr before applying oil-based products\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eTo accelerate dry time in humid conditions, add \u003ca href=\".\/water-based-accelerator-general-finishes-additives\"\u003eGeneral Finishes Accelerator\u003c\/a\u003e and work in a space with good ventilation and air movement. If you decide to re-coat before the recommended time, test dryness.\u003c\/li\u003e\n\u003cli\u003eFinish sand between coats with a fine-grade (220-320) foam sanding pad to improve smoothness and adhesion.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003cli\u003eA topcoat is not required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCure Time\u003c\/h4\u003e\n\u003cp\u003eWater-based finishes cure and harden for full use after 21 days in ideal conditions. Avoid placing heavy objects on surfaces that have not completely cured. Treat gently, and do not clean with commercial products during the curing period.\u003c\/p\u003e\n\u003cp\u003eWarning: Do not use water-based products with Linseed Oils or Danish Oils.\u003c\/p\u003e\n\u003c!--\/.accordion-content--\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- End: Accordian Step 3 -----------------------------------------------\u003e \u003c!-- Storage of Water-Based Products ---------------------------------------------------\u003e\n\u003carticle\u003e\n\u003ch4\u003eStorage of Water-Based Products\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cp\u003ePlease be mindful of the manner in which water-based products are stored and how long they have been in storage. They are not a forever product.\u003c\/p\u003e\n\u003ch4\u003eLife of Product\u003c\/h4\u003e\n\u003cp\u003eWater-based products do not last forever, even when unopened. General Finishes products are best used within 1 year of the manufacture date listed on the can. However, the life of the product may be extended with proper care and storage (see Storage Tips below).\u003c\/p\u003e\n\u003cp\u003eWater-based products can last 3-5 years if the can is unopened, in good condition and stored in correct temperatures.\u003c\/p\u003e\n\u003cp\u003eProduct that is 3 years old will not look like product that is 6 months to 1 year old. You will see more stratification or separation as the product ages. Always stir thoroughly before using.\u003c\/p\u003e\n\u003ch4\u003eFoul Smell\u003c\/h4\u003e\n\u003cp\u003eIf your product has a foul smell, it is contaminated and no longer in useable condition.\u003c\/p\u003e\n\u003ch4\u003eClumps \u0026amp; Settling\u003c\/h4\u003e\n\u003cp\u003eGravity can cause some solids to settle on the bottom of the can and slight separation on the top. This is normal. If working with older product stir with a paint mixing attachment on a drill.\u003c\/p\u003e\n\u003cp\u003eIf the solids dissolve and clumps smooth out after mixing from the bottom, the product is in good condition for use.\u003c\/p\u003e\n\u003cp\u003eInability to reincorporate large, chunky lumps after stirring for several minutes is an indication that the product has frozen and can no longer be used.\u003c\/p\u003e\n\u003ch4\u003eStorage Tips\u003c\/h4\u003e\n\u003cp\u003eWater-based finishes crystalize and form a skin due to evaporation when the air-tight seal on a can is broken at first use. The following best practices will increase the life of your product:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ePry open sealed lids with a paint can opener by hooking under the lid's rolled edge. The use of a screwdriver can disfigure the rim and lid, impairing a complete seal.\u003c\/li\u003e\n\u003cli\u003eKeep lid closed while working. Pour what you will use into a bowl, paper cup, or plate, and close can lid as you work.\u003c\/li\u003e\n\u003cli\u003eClean the chime of the can thoroughly with a paper towel before closing to create a complete seal. Product falling into the chime can be minimized by using a pouring lid, such as Fitsall. Avoid wiping used brushes on the lid.\u003c\/li\u003e\n\u003cli\u003ePound the lid in place using a rubber mallet to avoid distorting the chime or lid. Dents in the lid from direct contact with a hammer can impair a complete seal. Alternatively, place a flat piece of wood over can lid and firmly pound shut.\u003c\/li\u003e\n\u003cli\u003eStore in moderate temperatures. Avoid temperatures below 50°F\/10°C or above 100°F\/26°C. Keep from freezing. Frozen and heat-damaged product cannot be revitalized. Temperature-controlled spaces, such as a basement, are ideal for storage. Do not store product in an attic, garage, in direct sunlight, or next to something warm like a water heater or furnace.\u003c\/li\u003e\n\u003cli\u003eStore can upside down to create a liquid seal, minimize evaporation and reduce the chance of crystallization. Decant remaining product from the can before stirring.\u003c\/li\u003e\n\u003cli\u003eDecant leftovers to a smaller container when the finish is almost used up. Alternative storage containers for water-based products are plastic FIFO bottles or glass bottles. Do not fill metal-lidded containers completely to prevent them from rusting.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eThe following water-based product mistures can be stored:\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eProduct thinned with up to 15% \u003ca href=\".\/water-based-extender-general-finishes-additives\"\u003eGeneral Finishes Extender\u003c\/a\u003e or \u003ca href=\".\/water-based-accelerator-general-finishes-additives\"\u003eGeneral Finishes Accelerator\u003c\/a\u003e, with the exception of thinned \u003ca href=\".\/water-based-wiping-stain-general-finishes\"\u003eGeneral Finishes Water Based Wood Stain\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eMixtures involving colors \u0026amp; sheens within the same product line, such as:\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Performance Satin + High Performance Gloss\u003c\/li\u003e\n\u003cli\u003eSnow White Milk Paint + Coastal Blue Milk Paint\u003c\/li\u003e\n\u003cli\u003eAmber Dye Stain + Merlot Dye Stain\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eThe following product mixtures should NOT be stored:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAny water based product with thinned tap water; water often contains bacteria that will adversely affect stored paint.\u003c\/li\u003e\n\u003cli\u003eTopcoat + Stain or Paint\u003c\/li\u003e\n\u003cli\u003eMilk Paint + Chalk Style Paint\u003c\/li\u003e\n\u003cli\u003eWater Based Wood Stain + Dye Stain\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!--\/.accordion-content--\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- End: Storage of Water-Based Products -----------------------------------------------\u003e \u003c!-- Furniture Care and Maintenance ---------------------------------------------------\u003e\n\u003carticle\u003e\n\u003ch4\u003eStorage of Water-Based Products\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003ch4\u003eCure First\u003c\/h4\u003e\n\u003cp\u003eYou have just finished applying a fine furniture finish. Treat gently until the paint or topcoat have fully cured. Allow 21 days for a water-based finish to cure and 30 days for an oil-based finish to cure before cleaning.\u003c\/p\u003e\n\u003ch4\u003eRegular Cleaning and Maintenance\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eRemove dust with a water-dampened cloth. Dust can build up over time and may scratch or dull finishes if not removed regularly.\u003c\/li\u003e\n\u003cli\u003eRemove fingerprints, cooking fumes and smoking residue with mild soap and water. These contaminants will not harm the finish, but they accumulate on surfaces and dull the original luster.\u003c\/li\u003e\n\u003cli\u003eAs with all fine furniture finishes, avoid using furniture polish, cleaners or dusting sprays that contain silicone, alcohol, ammonia and anything acidic. Exception: We have successfully cleaned with Clorox wipes.\u003c\/li\u003e\n\u003cli\u003eClean up water, alcohol and food spills in a timely manner and use placemats \u0026amp; coasters to protect the finish.\u003c\/li\u003e\n\u003cli\u003eFuture finishes or touch-ups may not adhere properly or perform as desired over a contaminated surface. Some contaminants, such as silicone, seep through finish into the wood and often cannot be removed.\u003c\/li\u003e\n\u003cli\u003eAvoid excessive exposure to direct sunlight, high temperatures or high humidity. These can damage furniture and finishes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!--\/.accordion-content--\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- End: Furniture Care and Maintenance -----------------------------------------------\u003e\n\u003c\/div\u003e\n\u003c!-- End Accordian: Instructions -----------------------------------------------\u003e","brand":"General Finishes","offers":[{"title":"Gallon \/ Flat","offer_id":8114239537271,"sku":"GF-PWFG","price":124.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Satin","offer_id":8114239471735,"sku":"GF-PWSG","price":124.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Semi-Gloss","offer_id":8114239438967,"sku":"GF-PWSGG","price":124.0,"currency_code":"USD","in_stock":true},{"title":"5 Gallon \/ Flat","offer_id":8114239570039,"sku":"GF-PWF5G","price":510.0,"currency_code":"USD","in_stock":true},{"title":"5 Gallon \/ Satin","offer_id":8114239504503,"sku":"GF-PWS5G","price":510.0,"currency_code":"USD","in_stock":true},{"title":"5 Gallon \/ Semi-Gloss","offer_id":30326886400067,"sku":"GF-PWSG5G","price":510.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/7892\/files\/gf-product-render-WATER-BASED-PIGMENTED-TOPCOAT-ENDURO-WHITE-POLY-flat-GALLON-CLOSED-v2-thick-banding-1000PX-general-finishes-2024.jpg?v=1730316835"},{"product_id":"water-based-milk-paint-general-finishes-specialty-coatings","title":"General Finishes Water Based Milk Paint, Specialty Coatings","description":"\u003c!-- Start: Topcoat Description -----------------------------------------------\u003e\n\u003cp\u003eGeneral Finishes Water Based Milk Paint is a premium interior\/exterior mineral based paint named for its low-luster sheen, which mimics the look of old-world furniture paint. It is not a powdered, casein-based milk paint, but a premixed, durable, self-sealing version. This General Finishes Milk Paint has a premium self-sealing finish and does not require a topcoat. Do NOT use any type of clear topcoat over white or light General Finishes Milk Paint colors, as it may cause yellowing when used over wood substrates. If a higher sheen is desired, use \u003ca href=\".\/white-water-based-poly-top-coat-general-finishes\"\u003eGF White Poly\u003c\/a\u003e or \u003ca href=\".\/water-based-brushable-white-enamel-general-finishes\"\u003eGF Brushable White Enamel\u003c\/a\u003e instead.\u003c\/p\u003e\n\u003cp\u003ePlease click the below headers to reveal the instructional info for this product.\u003c\/p\u003e\n\u003c!-- Start Accordian: Instructions -----------------------------------------------\u003e\n\u003cdiv\u003e\n\u003c!-- Step 1: Preparation of Dye Stain -------------------------------------\u003e\n\u003carticle\u003e\n\u003ch4\u003eStep 1: Preparation for Milk Paint\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cp\u003eAll wood projects require preparation sanding, and all existing finishes require prep cleaning and sanding. If you skip this critical step, your finish may fail.\u003c\/p\u003e\n\u003ch4\u003ePreparation for Raw Wood or Raw Wood Projects That Are to be Stained\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eSanding Schedule: 120-grit followed by 150- or 220-grit sandpaper.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003cli\u003eLet dry completely before applying GF product.\u003c\/li\u003e\n\u003cli\u003eDo not over-sand with fine-grit sandpapers; this will close and seal the wood grain, preventing ideal color absorption.\u003c\/li\u003e\n\u003cli\u003eDo NOT use steel wool with water-based finishes; the particles will get trapped in the finish and rust.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003ePreparation for Projects with an Existing Finish (Sealed Surface)\u003c\/h4\u003e\n\u003cp\u003eFor high-use areas with heavy grime build-up and oil from hands, give your project a deeper cleaning.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eScuff clean with a Scotch Brite™ pad and a 50:50 mix of denatured alcohol and water. Dry 1-2 hours. Avoid cleaning with products containing phosphates (salt), which can linger in the substrate and produce a white haze. If your project requires a deeper cleaning, see Power Prep Cleaning Highly Used Existing Finishes below.\u003c\/li\u003e\n\u003cli\u003eSand lightly with a fine-grade (220-320) foam sanding pad.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003cli\u003eLet dry completely before applying General Finishes product.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003ePower Prep Cleaning Highly Used Existing Finishes\u003c\/h4\u003e\n\u003cp\u003eFor high-use areas such as kitchen cabinets or table tops with heavy grime build-up and oil from hands, give your project a \"Power\" clean.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eScrub clean with a detergent, such as Spic and Span or Dawn, using a Scotch Brite™ pad.\u003c\/li\u003e\n\u003cli\u003eRinse well with water.\u003c\/li\u003e\n\u003cli\u003eScrub clean with a Scotch Brite™ pad and a 50:50 mix of denatured alcohol and water. Dry 1-2 hours.\u003c\/li\u003e\n\u003cli\u003eSand lightly with a fine-grade (220-320) foam sanding pad.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003cli\u003eLet dry completely before applying General Finishes product.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eAlternative Cleaning Solutions For Existing Finishes (Not as aggressive or effective as denatured alcohol; requires rinsing.)\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e50:50 mix of bleach and water\u003c\/li\u003e\n\u003cli\u003e50:50 mix of vinegar and water\u003c\/li\u003e\n\u003cli\u003eMineral spirits can be used when working with water-based products, but only if the surface is thoroughly rinsed and allowed to dry for 72 hours.\u003c\/li\u003e\n\u003cli\u003eIf you use with products containing phosphates (salt), which can linger in the substrate and produce a white haze, be sure to rinse thoroughly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!--\/.accordion-content--\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- End: Accordian Step 1 -----------------------------------------------\u003e \u003c!-- Step 2: Priming -----------------------------------------------------\u003e\n\u003carticle\u003e\n\u003ch4\u003eStep 2: Priming\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cp\u003eA base coat of primer is not required to use General Finishes Milk Paint. However, 2 coats of \u003ca href=\".\/stain-blocker-water-based-primer-general-finishes\"\u003eGeneral Finishes Stain Blocker\u003c\/a\u003e may be necessary in the following circumstances, especially when using WHITE OR LIGHT-COLORED PAINTS.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eRaw Wood Tannin Bleed-Through\u003c\/strong\u003e is unpredictable; yellowing can appear immediately or months later with seasonal temperature changes. Oak, pine, mahogany and douglas fir are particularly prone to bleed-through.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKnots in Wood\u003c\/strong\u003e contain rosin (sap) and are dense, making paint adhesion a challenge. Pine knots are especially difficult to cover with white or light paints. If you decide to paint over them, apply 3 coats of Stain Blocker over the areas with knots first; however, we cannot guarantee against rosin bleed-through. You are better off using a dark paint on pine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExisting Finish Bleed-Through\u003c\/strong\u003e may be caused previous stains or aniline dyes, surface contamination, and incompatibility between brands.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDark Paint Colors Over Existing Surfaces:\u003c\/strong\u003e To improve coverage when applying darker colors such as Coastal Blue, Dark Chocolate, or Queenstown Gray, prime with a coat of Lamp Black.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-Wood Surfaces\u003c\/strong\u003e may be able to take paint if primed first. Primer may improve adhesion over laminate and prevent bleed-through from MDF. Metal requires a primer made specifically for metal.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eNOTE: Do not tint or use \u003ca href=\".\/stain-blocker-water-based-primer-general-finishes\"\u003eStain Blocker\u003c\/a\u003e on projects that will be stored outdoors.\u003c\/p\u003e\n\u003ch4\u003ePriming Non-Wood Surfaces for Paint\u003c\/h4\u003e\n\u003cp\u003eAlways test for adhesion on a hidden area of your project before getting started.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMetal: General Finishes Milk Paint\u003c\/strong\u003e is engineered for wood surfaces, but may adhere to metal, such as aluminum or steel, if a metal primer is applied first.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eClean surface well.\u003c\/li\u003e\n\u003cli\u003eApply primer.\u003c\/li\u003e\n\u003cli\u003eDry 48-72 hours before painting.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eLaminate:\u003c\/strong\u003e Milk Paint MAY adhere to laminate with a bonding primer; however, we cannot guarantee it. You may increase your chances of success by abrading the surface.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ePrep: Deep clean, dry thoroughly, sand with 150- then 180-grit sandpaper and wipe off dust.\u003c\/li\u003e\n\u003cli\u003ePrime: Apply bonding primer, dry 12+ hours before painting.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eMDF:\u003c\/strong\u003e Milk Paint can be applied directly to MDF, but the MDF may cast a brown color if not primed first. Two base coats of white-pigmented shellac-based stain-blocking primer, or Stain Blocker, may prevent bleed-through. Alternatively, one base coat of General Finishes Seagull Gray Milk Paint may block brown tone caused by MDF.\u003c\/p\u003e\n\u003cp\u003eMDF is not as absorbent as natural wood. Let each coat of primer and paint dry at least 48 hours before re-coating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFiberglass:\u003c\/strong\u003e Milk Paint can be applied directly over fiberglass without primer. We do not recommend applying other General Finishes products over fiberglass. Gel Stain may adhere to fiberglass, but it is not an exterior rated product.\u003c\/p\u003e\n\u003ch4\u003eDisclaimer\u003c\/h4\u003e\n\u003cp\u003eAlthough \u003ca href=\".\/stain-blocker-water-based-primer-general-finishes\"\u003eStain Blocker\u003c\/a\u003e is engineered to prevent the most persistent bleed-through when two coats are applied, General Finishes cannot guarantee prevention of bleed-through or yellowing on every project. Unknown factors and assiduous bleed-through can impact results. \u003ca href=\".\/stain-blocker-water-based-primer-general-finishes\"\u003eStain Blocker\u003c\/a\u003e is the strongest option we are aware of at this time and has performed extremely well in our tests.\u003c\/p\u003e\n\u003c!--\/.accordion-content--\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- End: Accordian Step 2 -----------------------------------------------\u003e \u003c!-- Step 3: How to Apply General Finishes Milk Paint ---------------------\u003e\n\u003carticle\u003e\n\u003ch4\u003eStep 3: How to Apply General Finishes Milk Paint\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eCAUTION:\u003c\/strong\u003e Do NOT use any type of clear topcoat over white or light GF Milk Paint Colors, as it may cause yellowing when used over wood substrates. GF Milk Paint is a premium self-sealing finish and does not require a topcoat. If you want a white paint with a higher sheen, use \u003ca href=\".\/white-water-based-poly-top-coat-general-finishes\"\u003eGF White Poly\u003c\/a\u003e (spray only) or \u003ca href=\".\/water-based-brushable-white-enamel-general-finishes\"\u003eGF Brushable White Enamel\u003c\/a\u003e instead. Darker colors can be top-coated if a higher sheen is desired.\u003c\/p\u003e\n\u003ch4\u003eGeneral Finishes Milk Paint Application Steps\u003c\/h4\u003e\n\u003cp\u003eSubstrate: Wood (See below for other substrates)\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eStir paint to reincorporate solids that have settled to the bottom of the can before and throughout the application process.\u003c\/li\u003e\n\u003cli\u003eThin as desired with distilled water; start with 5%, adding up to 10% by volume.\u003c\/li\u003e\n\u003cli\u003eIncrease open time, if needed, with up to 5% \u003ca href=\".\/water-based-extender-general-finishes-additives\"\u003eGeneral Finishes Extender\u003c\/a\u003e if allowed by local regulations. \u003ca href=\".\/water-based-extender-general-finishes-additives\"\u003eGF Extender\u003c\/a\u003e will improve flow and leveling and increase open time, which is helpful in dry climates. California Residents: Adding more than 2% of \u003ca href=\".\/water-based-extender-general-finishes-additives\"\u003eGF Extender\u003c\/a\u003e will make the products non-compliant per SCAQMD Regulations. GF assumes no liability for the improper use of these products.\u003c\/li\u003e\n\u003cli\u003eApply as many coats as needed for desired coverage. 2-3 coats are standard but additional coats may be required when using colors with less \"hide properties,\" such as bright reds, greens, yellows and whites.\n\u003cul\u003e\n\u003cli\u003eHand application: Using a synthetic bristle brush, foam brush, paint pad applicator or 3\/8\" nap microfiber roller such as Whizz or AllPro brand, apply using smooth, even strokes.\u003c\/li\u003e\n\u003cli\u003eSpray application: Before spraying, strain paint through a medium-mesh filter. Spray wet films at 3-5-mil thickness. HVLP: 1.8mm-2.0mm spray tip, medium air cap. Verify tip sizes with your equipment supplier. \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0062\/7892\/files\/gf-hvlp-spray-tip-sizes.pdf?13835\"\u003eSee our general guide for spray tip sizes\u003c\/a\u003e. Keep your gun at a 90° angle, 6-8\" from the surface. On large, flat areas, use wet, even patterns 6-8\" wide. For narrow surfaces, reduce the fan pattern to 2-3\" wide to reduce overspray. Overlap each pass 25% to conceal lines. Wear full filter NIOSH\/MSHA-approved respiratory \u0026amp; eye protection.\u003c\/li\u003e\n\u003cli\u003eFace frames on cabinets: Milk Paint can be applied successfully to cabinet face frames, edges or drawer fronts with a brush, pad or small cabinet-specific roller such as Whizz or AllPro brand.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDry 2+ hours between coats and before gf water-based topcoat in ideal conditions: 70°F\/20°C; 50-70% humidity. Be sure to allow adequate dry time. You can tell if a water-based finish is dry if it forms a powder when lightly sanded with a fine-grade (220-320) foam sanding pad. If in doubt, wait longer. Rushing dry time can cause clouding\/blush in topcoat due to moisture trapped between coats. Increase dry time if:\n\u003cul\u003e\n\u003cli\u003eHumidity is over 80%\u003c\/li\u003e\n\u003cli\u003e3+ coats are applied\u003c\/li\u003e\n\u003cli\u003eThick coats are applied\u003c\/li\u003e\n\u003cli\u003eApplying over an existing sealed finish\u003c\/li\u003e\n\u003cli\u003eApplying over products from other brands\u003c\/li\u003e\n\u003cli\u003eLayering General Finishes water- and oil-based products:\n\u003cul\u003e\n\u003cli\u003eWater over oil: Let oil-based products dry 72+hrs before applying water-based products\u003c\/li\u003e\n\u003cli\u003eOil over water: Let water-based products dry 24+hrs before applying oil-based products\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eTo accelerate dry time in humid conditions, add \u003ca href=\".\/water-based-accelerator-general-finishes-additives\"\u003eGeneral Finishes Accelerator\u003c\/a\u003e and work in a space with good ventilation and air movement. If you decide to re-coat before the recommended time, test dryness.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eFinish sand between coats with a fine-grade (220-320) foam sanding sponge or 400-grit sandpaper to improve smoothness and adhesion. Do not use conventional steel wool.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003cli\u003eTopcoat is not required but is recommended in certain situations. See \"Step 4: Topcoat over Milk Paint\" below.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eCure Time\u003c\/h4\u003e\n\u003cp\u003eWater-based finishes cure and harden for full use after 21 days in ideal conditions. Avoid placing heavy objects on surfaces that have not completely cured. Treat gently, and do not clean with commercial products during the curing period.\u003c\/p\u003e\n\u003ch4\u003eNotes on Color\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAll white paints darken or yellow over time, but the change is more evident with bright whites, such as General Finishes Snow White Milk Paint.\u003c\/li\u003e\n\u003cli\u003eSome colors made in a clear base require additional coats for coverage due to their lower hide quality, e.g., reds, deep blues and yellows. Bright whites may require additional coats over dark existing finishes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWarning: Do not use water-based products with Linseed Oils or Danish Oils.\u003c\/p\u003e\n\u003ch4\u003eSubstrates:\u003c\/h4\u003e\n\u003cp\u003eThe above instructions are for application over wood surfaces only. Non-wood substrates require different application techniques and dry times.\u003c\/p\u003e\n\u003cp\u003eWith the proper application technique, Milk Paint can adhere well to:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePVC\u003c\/li\u003e\n\u003cli\u003eVinyl\u003c\/li\u003e\n\u003cli\u003eFiberglass\u003c\/li\u003e\n\u003cli\u003eMDF\u003c\/li\u003e\n\u003cli\u003eWood\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!--\/.accordion-content--\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- End: Accordion Step 3 -----------------------------------------------\u003e \u003c!-- Step 4: Topcoat over Milk Paint ---------------------------------------------------\u003e\n\u003carticle\u003e\n\u003ch4\u003eStep 4: Topcoat over Milk Paint\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eCAUTION:\u003c\/strong\u003e Do NOT use any type of clear topcoat over white or light GF Milk Paint Colors, as it may cause yellowing when used over wood substrates. GF Milk Paint is a premium self-sealing finish and does not require a topcoat. If you want a white paint with a higher sheen, use \u003ca href=\".\/white-water-based-poly-top-coat-general-finishes\"\u003eGF White Poly\u003c\/a\u003e (spray only) or \u003ca href=\".\/water-based-brushable-white-enamel-general-finishes\"\u003eGF Brushable White Enamel\u003c\/a\u003e instead. Darker colors can be top-coated if a higher sheen is desired.\u003c\/p\u003e\n\u003cp\u003eHowever, you can topcoat darker colors in high-use surfaces, such as kitchen cabinets or tabletops, with 3 coats of topcoat if you want to increase sheen. Glossier sheens will boost durability and make the surface easier to clean.\u003c\/p\u003e\n\u003ch4\u003eRecommendations\u003c\/h4\u003e\n\u003cp\u003e\u003ca href=\".\/water-based-clear-high-performance-poly-top-coat-general-finishes\"\u003eGeneral Finishes High Performance Topcoat\u003c\/a\u003e and \u003ca href=\".\/clear-water-based-poly-top-coat-general-finishes\"\u003eGeneral Finishes Enduro Clear Poly\u003c\/a\u003e dry crystal-clear and are great for darker colors for high-use surfaces. \u003ca href=\".\/\"\u003eGeneral Finishes Flat Out Flat\u003c\/a\u003e is our flattest topcoat, only suitable for projects that do not receive major wear.\u003c\/p\u003e\n\u003ch4\u003eTopcoating General Finishes Snow White Milk Paint\u003c\/h4\u003e\n\u003cp\u003eClear, water-based finishes can react with wood substrates and previous finishes, causing the topcoat to yellow. This is most evident when using bright white paints. To avoid potential yellowing, use 3 coats of spray-only \u003ca href=\".\/white-water-based-poly-top-coat-general-finishes\"\u003eGF White Poly\u003c\/a\u003e as a standalone finish.\u003c\/p\u003e\n\u003c!--\/.accordion-content--\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- End: Accordian Step 4 -----------------------------------------------\u003e \u003c!-- Creative Finishing Techniques Using Milk Paint ----------------------------\u003e\n\u003carticle\u003e\n\u003ch4\u003eCreative Finishing Techniques Using Milk Paint\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003ch4\u003eLayering Colors \u0026amp; Distressing\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eTest colors on the underside of your project to ensure it is what you want.\u003c\/li\u003e\n\u003cli\u003eStir the paint. If it is too thick, add a small amount of water to thin, then stir again.\u003c\/li\u003e\n\u003cli\u003eApply 2 coats of base color using an acrylic bristle brush, poly foam brush, paint pad applicator, or sprayer with an HVLP 1.8 or 2.0 needle.\u003c\/li\u003e\n\u003cli\u003eDry 2-4 hours between coats. Buff each coat with a fine-grade (220-320) foam sanding pad or 400-grit sandpaper.\u003c\/li\u003e\n\u003cli\u003eApply 2 coats of top color. Dry 2-4 hours between coats, but no more than 4 hours; sanding is easier when the paint has had less time to tighten down. Buff each coat as before with a fine-grade (220-320) foam sanding pad or 400-grit sandpaper. TIP: If you want more of the underlying color exposed, seal the base color with a coat of \u003ca href=\".\/water-based-clear-high-performance-poly-top-coat-general-finishes\"\u003eGeneral Finishes High Performance Topcoat\u003c\/a\u003e before painting the top color. This allows for easier sanding without burning all the way through to bare wood.\u003c\/li\u003e\n\u003cli\u003eUsing 120- to 150-grit sandpaper, sand through the top color to reveal the base color.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eChippy Farmhouse Technique\u003c\/h4\u003e\n\u003cp\u003eMATERIALS NEEDED:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\".\/water-based-wiping-stain-general-finishes\"\u003eGeneral Finishes Water Based Wood Stain: Espresso\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\".\/\"\u003eGeneral Finishes Milk Paint: Snow White\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eWater-Based Topcoat\u003c\/li\u003e\n\u003cli\u003eAssorted Foam \u0026amp; Chip Brushes\u003c\/li\u003e\n\u003cli\u003eVaseline\u003c\/li\u003e\n\u003cli\u003ePaper Towels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSTEPS:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eStain raw wood with Espresso Water Based Wood Stain.\u003c\/li\u003e\n\u003cli\u003ePaint or dab Vaseline in random areas.\u003c\/li\u003e\n\u003cli\u003ePaint over Vaseline with Snow White Milk Paint. Let dry.\u003c\/li\u003e\n\u003cli\u003eWipe back with a paper towel to reveal chipped areas (repeat with different colors for layered, aged effect).\u003c\/li\u003e\n\u003cli\u003eSeal with 3 coats of water based topcoat.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eCreating Custom Colors\u003c\/h4\u003e\n\u003cp\u003eYou can design your own custom glazes, stains, washes and varnishes with General Finishes intermixable water-based products. See tips and recipes below:\u003c\/p\u003e\n\u003cp\u003eFor the mixes listed below, General Finishes recommends the following two steps:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eApplying a base layer of High Performance Topcoat before applying your custom glaze.\u003c\/li\u003e\n\u003cli\u003eProtect all of these finishes with 2-3 coats of topcoat when you are finished.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003ePastel Glaze\/Whitewash:\u003c\/h4\u003e\n\u003cp\u003eMATERIALS NEEDED:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGeneral Finishes Milk Paint: Your choice of colors\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\".\/water-based-glaze-general-finishes-finish-effects\"\u003eGeneral Finishes Glaze Effects: Winter White\u003c\/a\u003e OR \u003ca href=\".\/water-based-wiping-stain-general-finishes\"\u003eGeneral Finishes Water Based Wood Stain: Whitewash\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDo not add more than 50% paint to the glaze or stain, or else there will be so much pigment it will be difficult to wipe away the finish.\u003c\/p\u003e\n\u003ch4\u003eCustom Glaze:\u003c\/h4\u003e\n\u003cp\u003eMATERIALS NEEDED:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\".\/water-based-glaze-general-finishes-finish-effects\"\u003eGeneral Finishes Glaze Effects\u003c\/a\u003e: Your choice of colors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSAMPLE MIX: \u003ca href=\".\/water-based-glaze-general-finishes-finish-effects\"\u003ePitch Black Glaze Effects\u003c\/a\u003e + \u003ca href=\".\/water-based-glaze-general-finishes-finish-effects\"\u003eWinter White Glaze Effects\u003c\/a\u003e. Experiment with proportions and colors.\u003c\/p\u003e\n\u003ch4\u003eCustom Stain Colors:\u003c\/h4\u003e\n\u003cp\u003eMATERIALS NEEDED:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGeneral Finishes Milk Paint: Your choice of color\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\".\/water-based-glaze-clear-base-finish-effects-general-finishes\"\u003eGeneral Finishes Glaze Effects: Clear Base\u003c\/a\u003e OR \u003ca href=\".\/water-based-pre-stain-wood-conditioner-general-finishes\"\u003eGeneral Finishes Pre-Stain Wood Conditioner Natural\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSAMPLE MIXES:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e1 part Milk Paint + 1 part \u003ca href=\".\/water-based-pre-stain-wood-conditioner-general-finishes\"\u003ePre-Stain Natural\u003c\/a\u003e [50:50 mix] OR\u003c\/li\u003e\n\u003cli\u003e1 part Milk Paint + 1 part \u003ca href=\".\/water-based-glaze-clear-base-finish-effects-general-finishes\"\u003eGlaze Effects: Clear Base\u003c\/a\u003e [50:50 mix] OR\u003c\/li\u003e\n\u003cli\u003e1 part Milk Paint + 2 parts Water Based Wood Stain Natural [1:2 mix]\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eProportions are relative to the color you are reducing. Some colors may require 2 parts Clear Base to reduce strength, others may require 1.\u003c\/p\u003e\n\u003cp\u003eBegin with a 50:50 mix, and add more Clear Base as needed.\u003c\/p\u003e\n\u003cp\u003eIncrease your color palette by mixing 2 or 3 Milk Paint colors together before adding the Clear Base.\u003c\/p\u003e\n\u003c!--\/.accordion-content--\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- End: Creative Finishing Techniques Using Milk Paint --------------------------\u003e \u003c!-- Cleanup of Water Based Products ---------------------------------------------------\u003e\n\u003carticle\u003e\n\u003ch4\u003eCleanup of Water Based Products\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cp\u003eApplication tools and materials containing water-based products can be cleaned with soap and water immediately after use.\u003c\/p\u003e\n\u003ch4\u003eProduct Spills\u003c\/h4\u003e\n\u003cp\u003eSpills may be able to be removed from fabric and carpet if cleaned immediately with soap and water.\u003c\/p\u003e\n\u003c!--\/.accordion-content--\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- End: Cleanup of Water Based Products -----------------------------------------------\u003e \u003c!-- Storage of Water-Based Products ---------------------------------------------------\u003e\n\u003carticle\u003e\n\u003ch4\u003eStorage of Water-Based Products\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cp\u003ePlease be mindful of the manner in which water-based products are stored and how long they have been in storage. They are not a forever product.\u003c\/p\u003e\n\u003ch4\u003eLife of Product\u003c\/h4\u003e\n\u003cp\u003eWater-based products do not last forever, even when unopened. General Finishes products are best used within 1 year of the manufacture date listed on the can. However, the life of the product may be extended with proper care and storage (see Storage Tips below).\u003c\/p\u003e\n\u003cp\u003eWater-based products can last 3-5 years if the can is unopened, in good condition and stored in correct temperatures.\u003c\/p\u003e\n\u003cp\u003eProduct that is 3 years old will not look like product that is 6 months to 1 year old. You will see more stratification or separation as the product ages. Always stir thoroughly before using.\u003c\/p\u003e\n\u003ch4\u003eFoul Smell\u003c\/h4\u003e\n\u003cp\u003eIf your product has a foul smell, it is contaminated and no longer in useable condition.\u003c\/p\u003e\n\u003ch4\u003eClumps \u0026amp; Settling\u003c\/h4\u003e\n\u003cp\u003eGravity can cause some solids to settle on the bottom of the can and slight separation on the top. This is normal. If working with older product stir with a paint mixing attachment on a drill.\u003c\/p\u003e\n\u003cp\u003eIf the solids dissolve and clumps smooth out after mixing from the bottom, the product is in good condition for use.\u003c\/p\u003e\n\u003cp\u003eInability to reincorporate large, chunky lumps after stirring for several minutes is an indication that the product has frozen and can no longer be used.\u003c\/p\u003e\n\u003ch4\u003eStorage Tips\u003c\/h4\u003e\n\u003cp\u003eWater-based finishes crystalize and form a skin due to evaporation when the air-tight seal on a can is broken at first use. The following best practices will increase the life of your product:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ePry open sealed lids with a paint can opener by hooking under the lid's rolled edge. The use of a screwdriver can disfigure the rim and lid, impairing a complete seal.\u003c\/li\u003e\n\u003cli\u003eKeep lid closed while working. Pour what you will use into a bowl, paper cup, or plate, and close can lid as you work.\u003c\/li\u003e\n\u003cli\u003eClean the chime of the can thoroughly with a paper towel before closing to create a complete seal. Product falling into the chime can be minimized by using a pouring lid, such as Fitsall. Avoid wiping used brushes on the lid.\u003c\/li\u003e\n\u003cli\u003ePound the lid in place using a rubber mallet to avoid distorting the chime or lid. Dents in the lid from direct contact with a hammer can impair a complete seal. Alternatively, place a flat piece of wood over can lid and firmly pound shut.\u003c\/li\u003e\n\u003cli\u003eStore in moderate temperatures. Avoid temperatures below 50°F\/10°C or above 100°F\/26°C. Keep from freezing. Frozen and heat-damaged product cannot be revitalized. Temperature-controlled spaces, such as a basement, are ideal for storage. Do not store product in an attic, garage, in direct sunlight, or next to something warm like a water heater or furnace.\u003c\/li\u003e\n\u003cli\u003eStore can upside down to create a liquid seal, minimize evaporation and reduce the chance of crystallization. Decant remaining product from the can before stirring.\u003c\/li\u003e\n\u003cli\u003eDecant leftovers to a smaller container when the finish is almost used up. Alternative storage containers for water-based products are plastic FIFO bottles or glass bottles. Do not fill metal-lidded containers completely to prevent them from rusting.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eThe following water-based product mistures can be stored:\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eProduct thinned with up to 15% \u003ca href=\".\/water-based-extender-general-finishes-additives\"\u003eGeneral Finishes Extender\u003c\/a\u003e or \u003ca href=\".\/water-based-accelerator-general-finishes-additives\"\u003eGeneral Finishes Accelerator\u003c\/a\u003e, with the exception of thinned \u003ca href=\".\/water-based-wiping-stain-general-finishes\"\u003eGeneral Finishes Water Based Wood Stain\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eMixtures involving colors \u0026amp; sheens within the same product line, such as:\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Performance Satin + High Performance Gloss\u003c\/li\u003e\n\u003cli\u003eSnow White Milk Paint + Coastal Blue Milk Paint\u003c\/li\u003e\n\u003cli\u003eAmber Dye Stain + Merlot Dye Stain\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eThe following product mixtures should NOT be stored:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAny water based product with thinned tap water; water often contains bacteria that will adversely affect stored paint.\u003c\/li\u003e\n\u003cli\u003eTopcoat + Stain or Paint\u003c\/li\u003e\n\u003cli\u003eMilk Paint + Chalk Style Paint\u003c\/li\u003e\n\u003cli\u003eWater Based Wood Stain + Dye Stain\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!--\/.accordion-content--\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- End: Storage of Water-Based Products -----------------------------------------------\u003e \u003c!-- Furniture Care and Maintenance ---------------------------------------------------\u003e\n\u003carticle\u003e\n\u003ch4\u003eFurniture Care \u0026amp; Maintenance\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003ch4\u003eCure First\u003c\/h4\u003e\n\u003cp\u003eYou have just finished applying a fine furniture finish. Treat gently until the paint or topcoat have fully cured. Allow 21 days for a water-based finish to cure and 30 days for an oil-based finish to cure before cleaning.\u003c\/p\u003e\n\u003ch4\u003eRegular Cleaning and Maintenance\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eRemove dust with a water-dampened cloth. Dust can build up over time and may scratch or dull finishes if not removed regularly.\u003c\/li\u003e\n\u003cli\u003eRemove fingerprints, cooking fumes and smoking residue with mild soap and water. These contaminants will not harm the finish, but they accumulate on surfaces and dull the original luster.\u003c\/li\u003e\n\u003cli\u003eAs with all fine furniture finishes, avoid using furniture polish, cleaners or dusting sprays that contain silicone, alcohol, ammonia and anything acidic. Exception: We have successfully cleaned with Clorox wipes.\u003c\/li\u003e\n\u003cli\u003eClean up water, alcohol and food spills in a timely manner and use placemats \u0026amp; coasters to protect the finish.\u003c\/li\u003e\n\u003cli\u003eFuture finishes or touch-ups may not adhere properly or perform as desired over a contaminated surface. Some contaminants, such as silicone, seep through finish into the wood and often cannot be removed.\u003c\/li\u003e\n\u003cli\u003eAvoid excessive exposure to direct sunlight, high temperatures or high humidity. These can damage furniture and finishes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!--\/.accordion-content--\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- End: Furniture Care and Maintenance -----------------------------------------------\u003e \u003c!-- Supporting Videos ---------------------------------------------------\u003e\n\u003carticle\u003e\n\u003ch4\u003eSupporting Instructional Videos\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-4 col-md-6 text-center\"\u003e\n\u003cdiv class=\"video-wrapper\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/CpsvdoamSmc\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-lg-4 col-md-6 text-center\"\u003e\n\u003cdiv class=\"video-wrapper\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/c6QK6Nd4_Ig\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-lg-4 col-md-6 text-center\"\u003e\n\u003cdiv class=\"video-wrapper\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/OVPZHYAicF4\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-lg-4 col-md-6 text-center\"\u003e\n\u003cdiv class=\"video-wrapper\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/yINVKwRGsLY\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-lg-4 col-md-6 text-center\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-4 col-md-6 text-center\"\u003e\n\u003cdiv class=\"video-wrapper\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/zn1KRRKw4Cc\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!--\/.accordion-content--\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- End: Supporting Videos -----------------------------------------------\u003e\n\u003c\/div\u003e\n\u003c!-- End Accordian: Instructions -----------------------------------------------\u003e","brand":"General Finishes","offers":[{"title":"Quart \/ Tuscan Red \/ Satin","offer_id":8114242486391,"sku":"GF-MPTRQ","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Tuscan Red \/ Satin","offer_id":8114242551927,"sku":"GF-MPTRG","price":109.0,"currency_code":"USD","in_stock":true},{"title":"Quart \/ Sunglow \/ Satin","offer_id":8114242617463,"sku":"GF-QS","price":35.2,"currency_code":"USD","in_stock":true},{"title":"Quart \/ Snow White \/ Satin","offer_id":8114242748535,"sku":"GF-MPSWQ","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Snow White \/ Satin","offer_id":8114242814071,"sku":"GF-MPSWG","price":109.0,"currency_code":"USD","in_stock":true},{"title":"5 Gallon \/ Snow White \/ Satin","offer_id":30326886694979,"sku":"GF-MPSW5G","price":455.0,"currency_code":"USD","in_stock":true},{"title":"Quart \/ Seagull Gray \/ Satin","offer_id":8114242846839,"sku":"GF-MPSGRQ","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Seagull Gray \/ Satin","offer_id":8114242912375,"sku":"GF-MPSGRG","price":109.0,"currency_code":"USD","in_stock":true},{"title":"Quart \/ Queenstown Gray \/ Satin","offer_id":8114243010679,"sku":"GF-MPQGQ","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Queenstown Gray \/ Satin","offer_id":8114243076215,"sku":"GF-MPQGG","price":109.0,"currency_code":"USD","in_stock":true},{"title":"Quart \/ Persimmon \/ Satin","offer_id":8114243108983,"sku":"GF-QTPS","price":35.2,"currency_code":"USD","in_stock":false},{"title":"Quart \/ Persian Blue \/ Satin","offer_id":8114243174519,"sku":"GF-MPPBQ","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Quart \/ Patina Green \/ Satin","offer_id":8114243240055,"sku":"GF-QTPG","price":35.2,"currency_code":"USD","in_stock":false},{"title":"Quart \/ Millstone \/ Satin","offer_id":8114243305591,"sku":"GF-QMI","price":35.2,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Millstone \/ Satin","offer_id":8114243371127,"sku":"GF-GMI","price":88.0,"currency_code":"USD","in_stock":false},{"title":"Quart \/ Linen \/ Satin","offer_id":8114243403895,"sku":"GF-MPLNQ","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Linen \/ Satin","offer_id":8114243469431,"sku":"GF-MPLNG","price":109.0,"currency_code":"USD","in_stock":true},{"title":"Quart \/ Lamp Black \/ Satin","offer_id":8114243567735,"sku":"GF-MPLBLQ","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Lamp Black \/ Satin","offer_id":8114243633271,"sku":"GF-MPLBLG","price":109.0,"currency_code":"USD","in_stock":true},{"title":"5 Gallon \/ Lamp Black \/ Satin","offer_id":30326886727747,"sku":"GF-MPLBL5G","price":455.0,"currency_code":"USD","in_stock":true},{"title":"Quart \/ Klein Blue \/ Satin","offer_id":8114243666039,"sku":"GF-QK","price":35.2,"currency_code":"USD","in_stock":false},{"title":"Quart \/ Holiday Red \/ Satin","offer_id":8114243731575,"sku":"GF-QHR","price":35.2,"currency_code":"USD","in_stock":true},{"title":"Quart \/ Halcyon Blue \/ Satin","offer_id":8114243797111,"sku":"GF-QHB","price":35.2,"currency_code":"USD","in_stock":false},{"title":"Quart \/ Emerald \/ Satin","offer_id":8114243862647,"sku":"GF-QE","price":35.2,"currency_code":"USD","in_stock":false},{"title":"Quart \/ Driftwood \/ Satin","offer_id":8114243928183,"sku":"GF-QD","price":35.2,"currency_code":"USD","in_stock":false},{"title":"Gallon \/ Driftwood \/ Satin","offer_id":8114243993719,"sku":"GF-GD","price":88.0,"currency_code":"USD","in_stock":false},{"title":"Quart \/ Dark Chocolate \/ Satin","offer_id":8114244026487,"sku":"GF-MPDCQ","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Dark Chocolate \/ Satin","offer_id":8114244092023,"sku":"GF-MPDCG","price":109.0,"currency_code":"USD","in_stock":true},{"title":"Quart \/ Coral Crush \/ Satin","offer_id":8114244124791,"sku":"GF-QCC","price":35.2,"currency_code":"USD","in_stock":false},{"title":"Quart \/ Coastal Blue \/ Satin","offer_id":8114244190327,"sku":"GF-MPCBLQ","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Quart \/ Basil \/ Satin","offer_id":8114244386935,"sku":"GF-MPBSQ","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Basil \/ Satin","offer_id":8114244452471,"sku":"GF-MPBSG","price":109.0,"currency_code":"USD","in_stock":true},{"title":"Quart \/ Antique White \/ Satin","offer_id":8114259263607,"sku":"GF-MPAWQ","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Antique White \/ Satin","offer_id":8114259329143,"sku":"GF-MPAWG","price":109.0,"currency_code":"USD","in_stock":true},{"title":"5 Gallon \/ Antique White \/ Satin","offer_id":30326886760515,"sku":"GF-MPAW5G","price":455.0,"currency_code":"USD","in_stock":true},{"title":"Quart \/ Alabaster \/ Satin","offer_id":30326886826051,"sku":"GF-QA","price":35.2,"currency_code":"USD","in_stock":false},{"title":"Gallon \/ Alabaster \/ Satin","offer_id":30326886858819,"sku":"GF-GA","price":88.0,"currency_code":"USD","in_stock":false},{"title":"Quart \/ Ballet Pink \/ Satin","offer_id":30326886924355,"sku":"GF-QBP","price":35.2,"currency_code":"USD","in_stock":false},{"title":"Quart \/ Blue Moon \/ Satin","offer_id":30326886989891,"sku":"GF-QBM","price":35.2,"currency_code":"USD","in_stock":false},{"title":"Quart \/ China Blue \/ Satin","offer_id":30326887055427,"sku":"GF-QCHB","price":35.2,"currency_code":"USD","in_stock":false},{"title":"Quart \/ Empire Gray \/ Satin","offer_id":30326887120963,"sku":"GF-QEG","price":35.2,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Empire Gray \/ Satin","offer_id":30326887153731,"sku":"GF-GEG","price":88.0,"currency_code":"USD","in_stock":false},{"title":"Quart \/ Gulf Stream Blue \/ Satin","offer_id":30326887219267,"sku":"GF-QGS","price":35.2,"currency_code":"USD","in_stock":false},{"title":"Quart \/ Harvest Yellow \/ Satin","offer_id":30326887284803,"sku":"GF-QHY","price":35.2,"currency_code":"USD","in_stock":false},{"title":"Quart \/ Key West \/ Satin","offer_id":30326887350339,"sku":"GF-QTKW","price":35.2,"currency_code":"USD","in_stock":false},{"title":"Quart \/ Perfect Gray \/ Satin","offer_id":30326887415875,"sku":"GF-MPPGQ","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Perfect Gray \/ Satin","offer_id":30326887448643,"sku":"GF-MPPGG","price":109.0,"currency_code":"USD","in_stock":true},{"title":"Quart \/ Reverent Gray \/ Satin","offer_id":30326887514179,"sku":"GF-QRGY","price":35.2,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Reverent Gray \/ Satin","offer_id":30326887546947,"sku":"GF-GRGY","price":88.0,"currency_code":"USD","in_stock":false},{"title":"Quart \/ Twilight \/ Satin","offer_id":30326887612483,"sku":"GF-QT","price":35.2,"currency_code":"USD","in_stock":false},{"title":"Gallon \/ Coastal Blue \/ Satin","offer_id":39564813631555,"sku":"GF-MPCBLG","price":109.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/7892\/products\/qttr.jpg?v=1577706420"},{"product_id":"water-based-white-base-milk-paint-general-finishes-specialty-coatings","title":"General Finishes Water Based White Base Milk Paint, Specialty Coatings","description":"\u003cspan\u003eHigh Performance Topcoat was rated as the hardest, most durable consumer polyurethane topcoat.\u003c\/span\u003e","brand":"General Finishes","offers":[{"title":"Quart \/ White","offer_id":8114244485239,"sku":"GF-MPWBSQ","price":47.5,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ White","offer_id":8114244518007,"sku":"GF-MPWBSG","price":95.33,"currency_code":"USD","in_stock":false},{"title":"5 Gallon \/ White","offer_id":8114244550775,"sku":"GF-MPWBS5G","price":473.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/7892\/products\/mwgs.JPG?v=1577706289"},{"product_id":"water-based-clear-base-milk-paint-general-finishes-specialty-coatings","title":"General Finishes Water Based Clear Base Milk Paint, Specialty Coatings","description":"\u003cspan\u003eHigh Performance Topcoat was rated as the hardest, most durable consumer polyurethane topcoat.\u003c\/span\u003e","brand":"General Finishes","offers":[{"title":"Quart \/ Clear","offer_id":8114244583543,"sku":"GF-MPCBSQ","price":34.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Clear","offer_id":8114244616311,"sku":"GF-MPCBSG","price":64.53,"currency_code":"USD","in_stock":false},{"title":"5 Gallon \/ Clear","offer_id":8114244649079,"sku":"GF-MPCBS5G","price":315.0,"currency_code":"USD","in_stock":true}]},{"product_id":"water-based-clear-high-performance-poly-top-coat-general-finishes","title":"General Finishes Water Based Clear High Performance Poly Top Coat","description":"\u003c!-- Start: Topcoat Description -----------------------------------------------\u003e\n\u003cp\u003eWinner of Fine Woodworking's \"Best Overall Choice Award,\" General Finishes High Performance Topcoat was voted as the hardest, most durable consumer polyurethane topcoat.\u003c\/p\u003e\n\u003cp\u003ePlease click the below headers to reveal the instructional info for this product.\u003c\/p\u003e\n\u003c!-- Start Accordian: Instructions -----------------------------------------------\u003e\n\u003cdiv\u003e\n\u003c!-- Step 1: Preparation of High Performance ---------------------------------------------------\u003e\n\u003carticle\u003e\n\u003ch4\u003eStep 1: Preparation for High Performance Topcoat\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cp\u003eAll wood projects require preparation sanding, and all existing finishes require prep cleaning and sanding. If you skip this critical step, your finish may fail.\u003c\/p\u003e\n\u003ch4\u003ePreparation for Raw Wood or Raw Wood Projects That Are to be Stained\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eSanding Schedule: 120-grit followed by 150- or 220-grit sandpaper.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003cli\u003eLet dry completely before applying GF product.\u003c\/li\u003e\n\u003cli\u003eDo not over-sand with fine-grit sandpapers; this will close and seal the wood grain, preventing ideal color absorption.\u003c\/li\u003e\n\u003cli\u003eDo NOT use steel wool with water-based finishes; the particles will get trapped in the finish and rust.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003ePreparation for Projects with an Existing Finish (Sealed Surface)\u003c\/h4\u003e\n\u003cp\u003eFor high-use areas with heavy grime build-up and oil from hands, give your project a deeper cleaning.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eScuff clean with a Scotch Brite™ pad and a 50:50 mix of denatured alcohol and water. Dry 1-2 hours. Avoid cleaning with products containing phosphates (salt), which can linger in the substrate and produce a white haze. If your project requires a deeper cleaning, see Power Prep Cleaning Highly Used Existing Finishes below.\u003c\/li\u003e\n\u003cli\u003eSand lightly with a fine-grade (220-320) foam sanding pad.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003cli\u003eLet dry completely before applying General Finishes product.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003ePower Prep Cleaning Highly Used Existing Finishes\u003c\/h4\u003e\n\u003cp\u003eFor high-use areas such as kitchen cabinets or table tops with heavy grime build-up and oil from hands, give your project a \"Power\" clean.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eScrub clean with a detergent, such as Spic and Span or Dawn, using a Scotch Brite™ pad.\u003c\/li\u003e\n\u003cli\u003eRinse well with water.\u003c\/li\u003e\n\u003cli\u003eScrub clean with a Scotch Brite™ pad and a 50:50 mix of denatured alcohol and water. Dry 1-2 hours.\u003c\/li\u003e\n\u003cli\u003eSand lightly with a fine-grade (220-320) foam sanding pad.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003cli\u003eLet dry completely before applying General Finishes product.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eAlternative Cleaning Solutions For Existing Finishes (Not as aggressive or effective as denatured alcohol; requires rinsing.)\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e50:50 mix of bleach and water\u003c\/li\u003e\n\u003cli\u003e50:50 mix of vinegar and water\u003c\/li\u003e\n\u003cli\u003eMineral spirits can be used when working with water-based products, but only if the surface is thoroughly rinsed and allowed to dry for 72 hours.\u003c\/li\u003e\n\u003cli\u003eIf you use with products containing phosphates (salt), which can linger in the substrate and produce a white haze, be sure to rinse thoroughly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!--\/.accordion-content--\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- End: Accordian Step 1 -----------------------------------------------\u003e \u003c!-- Step 2: How to Apply High Performance ------------------------------------------\u003e\n\u003carticle\u003e\n\u003ch4\u003eStep 2: How to Apply General Finishes High Performance\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cp\u003eCAUTION: Do NOT use GF High Performance or any other clear coat, over white or light paints such as \u003ca href=\".\/water-based-milk-paint-general-finishes-specialty-coatings\"\u003eGeneral Finishes Milk Paint\u003c\/a\u003e, or \u003ca href=\".\/white-water-based-poly-top-coat-general-finishes\"\u003eGeneral Finishes Enduro White Poly\u003c\/a\u003e as it may cause yellowing. Any clear coat can become reactive over wood substrates or existing finishes causing tannin, stain or dye bleed-through. All of GF's White Paints, brushable or spray versions, do NOT require a topcoat.\u003c\/p\u003e\n\u003ch4\u003eHigh Performance Topcoat Application Steps\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eStir to reincorporate solids that have settled to the bottom of the can before and throughout the application process.\u003c\/li\u003e\n\u003cli\u003eThin as desired with distilled water; start with 5%, increase up to 10% by volume. Increase open time, if needed, with up to 5% \u003ca href=\".\/water-based-extender-general-finishes-additives\"\u003eGeneral Finishes Extender\u003c\/a\u003e if allowed by local regulations. GF Extender will improve flow and leveling and increase open time, which is helpful in dry climates. California Residents: Adding more than 2% of GF Extender will make the products non-compliant per SCAQMD Regulations. GF assumes no liability for the improper use of these products.\u003c\/li\u003e\n\u003cli\u003eApply 3 coats of High Performance. More coats will not improve durability.\n\u003cul\u003e\n\u003cli\u003eHand application: Apply a liberal amount of product using a synthetic bristle brush, foam brush, pad applicator, or roller such as Whizz or AllPro Velour brand. Avoid pressure and excessive back brushing. Brush along the wood grain using smooth, even strokes with light lap marks. Let lap marks dry - they WILL tighten down.\u003c\/li\u003e\n\u003cli\u003eSpray Application: Before spraying, strain topcoat through a fine-mesh filter. Spray wet films at 3-5-mil thickness. HVLP: 1.1mm-1.3mm spray tip, medium air cap. Verify tip sizes with your equipment supplier. \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0062\/7892\/files\/gf-hvlp-spray-tip-sizes.pdf?13835\"\u003eSee our general guide for spray tip sizes\u003c\/a\u003e. Keep your gun at a 90° angle, 6-8\" from the surface. On large, flat areas, use wet, even patterns 6-8\" wide. For narrow surfaces, reduce the fan pattern to 2-3\" wide to reduce overspray. Overlap each pass 25% to conceal lines. Wear a full filter respirator (NIOSH\/MSHA approved) and work in a ventilated space.\u003c\/li\u003e\n\u003cli\u003eFace frames and drawers on cabinets: High Performance can be successfully applied by hand to cabinet face frames or edges with a brush, pad or small, cabinet-specific roller such as Whizz or AllPro Velour brand.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eIf a faster build is desired over raw wood, use \u003ca href=\".\/water-based-sanding-sealer-general-finishes\"\u003eGeneral Finishes Sanding Sealer\u003c\/a\u003e for the first coat, followed by 2 coats of High Performance Topcoat.\u003c\/li\u003e\n\u003cli\u003eDry 2+ hours between coats in ideal conditions: 70°F 20°C; 50% humidity. Be sure to allow adequate dry time. You can tell if a water-based finish is dry if it forms a powder when lightly sanded with a fine-grade (220-320) foam sanding pad. If in doubt, wait longer. Rushing the dry time can cause \"blush\", which is clouding in the finish due to moisture trapped between the layers. Increase dry time if:\n\u003cul\u003e\n\u003cli\u003eHumidity is over 80%\u003c\/li\u003e\n\u003cli\u003e3+ coats are applied\u003c\/li\u003e\n\u003cli\u003eThick coats are applied\u003c\/li\u003e\n\u003cli\u003eApplying over an existing sealed finish\u003c\/li\u003e\n\u003cli\u003eApplying over products from other brands\u003c\/li\u003e\n\u003cli\u003eLayering General Finishes water- and oil-based products:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eWater over oil: Let oil-based products dry 72+hr before applying water-based products\u003c\/li\u003e\n\u003cli\u003eOil over water: Let water-based products dry 24+hr before applying oil-based products\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eTo accelerate dry time in humid conditions, add \u003ca href=\".\/water-based-accelerator-general-finishes-additives\"\u003eGeneral Finishes Accelerator\u003c\/a\u003e and work in a space with good ventilation and air movement. If you decide to re-coat before the recommended time, test dryness.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eFinish sand between coats with a fine-grade (220-320) foam sanding pad to improve smoothness and adhesion.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eCure Time\u003c\/h4\u003e\n\u003cp\u003eWater-based finishes cure and harden for full use after 21 days in ideal conditions. Avoid placing heavy objects on surfaces that have not completely cured. Treat gently, and do not clean with commercial products during the curing period.\u003c\/p\u003e\n\u003ch4\u003eTips to prevent streaking during hand-application:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eUse a semi-gloss or gloss sheen with little to no flatting agents. The more flatting agents, the more likely a topcoat will streak when applied.\u003c\/li\u003e\n\u003cli\u003eTo avoid streaking with the flatter sheens, apply a liberal amount of product and avoid using pressure and back-brushing. Wipe along the wood grain using smooth, even strokes. For large surfaces, apply topcoat with a large applicator, such as a paint pad.\u003c\/li\u003e\n\u003cli\u003eRemove any streaks that occur by buffing with fine-grade (220-320) sanding pad, or sanding well and re-coating.\u003c\/li\u003e\n\u003cli\u003eFor the smoothest result, apply with a spray gun.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eMixing Sheens\u003c\/h4\u003e\n\u003cp\u003eYou mix can High Performance Topcoat sheens to adjust your sheen. For example, you can mix High Performace Flat and High Performance Gloss to obtain a different sheen.\u003c\/p\u003e\n\u003cp\u003eWarning: Do not use water-based products with Linseed Oils or Danish Oils.\u003c\/p\u003e\n\u003c!--\/.accordion-content--\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- End: Accordian Step 2 -----------------------------------------------\u003e \u003c!-- Yellowing \u0026 Clear Topcoat ---------------------------------------------------\u003e\n\u003carticle\u003e\n\u003ch4\u003eYellowing \u0026amp; Clear Topcoat\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cp\u003eAs is true of most \"water-white\" topcoats, General Finishes water-based topcoats dry clear over non-reactive substrates, such as plastic or metal, except \u003ca href=\".\/clear-enduro-var-water-based-top-coat-general-finishes\"\u003eGeneral Finishes Enduro-Var\u003c\/a\u003e, which ambers. When white paint sealed with a water-white topcoat is applied to something as unpredictable as wood, all bets are off and the reason for yellowing is often unknown. It can be caused by topcoat activating tannins in raw wood or aniline dyes, stains, or contaminants in a pre-existing finish. This is most evident when using BRIGHT WHITE paint and most prevalent in sculpted details of furniture where the topcoat can collect, intensifying color change to an unacceptable level.\u003c\/p\u003e\n\u003cp\u003eThere is no reliable way to predict whether yellowing will occur and to what degree. Every existing finish is different and we rarely know the finishing provenance on an existing piece. Every tree is different and every piece of wood is unique. Raw wood can bleed tannins immediately after the topcoat dries or months later with seasonal temperature changes. Oak, pine, mahogany, and douglas fir are particularly prone to bleed-through.\u003c\/p\u003e\n\u003ch4\u003eSummary\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eWhites have a lower “hide” quality and are more transparent than most other colors. Nearly all bright whites require additional coats to achieve the desired color and minimize color variation. This can increase the cost of paint finishing. Always include a clause in your contracts addressing the need for additional coats to achieve coverage.\u003c\/li\u003e\n\u003cli\u003eAll bright white paint will yellow slightly with time, with or without topcoat. You have probably tried to touch up white woodwork in your home after several years and noticed the new paint is brighter.\u003c\/li\u003e\n\u003cli\u003eThe underlying finish or wood species can affect the final color of light paint.\u003c\/li\u003e\n\u003cli\u003eDetails and inside corners are difficult to cover with any paint color, but it tends to be more noticeable with whites. This is a naturally occurring phenomenon in paint application and does not necessarily constitute a defect in the paint finish or your technique.\u003c\/li\u003e\n\u003cli\u003eThe more porous the paint, such as a chalk paint, the more likely that yellowing will occur. The topcoat is seeping through the spaces caused by the larger particles of filler that give Chalk Paints their texture.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTips to Prevent Yellowing\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eIf it is a low-use project, use a premium white paint that is self-sealing and does not require a topcoat. A clear topcoat is not required on \u003ca href=\".\/water-based-milk-paint-general-finishes-specialty-coatings\"\u003eGeneral Finishes Milk Paint\u003c\/a\u003e for increased durability, as it is a self-sealing, exterior-rated coating with high durability and chemical and water resistance. However, topcoats do provide a smooth surface that is easier to clean and boosts durability for high-use projects, such as tabletops and kitchen cabinets.\u003c\/li\u003e\n\u003cli\u003eUse a professional spray such as \u003ca href=\".\/white-water-based-poly-top-coat-general-finishes\"\u003eGeneral Finishes Enduro White Poly\u003c\/a\u003e. It has \"increased topcoat properties,\" is a standalone finish when 3 coats are applied, and does not require sealing with a topcoat.\u003c\/li\u003e\n\u003cli\u003eWe recommend using \u003ca href=\".\/stain-blocker-water-based-primer-general-finishes\"\u003eGeneral Finishes Stain Blocker\u003c\/a\u003e, an engineered chemical barrier, to prevent persistent bleed-through for interior-use projects.\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\".\/stain-blocker-water-based-primer-general-finishes\"\u003eStain Blocker\u003c\/a\u003er does not adhere to melamine cabinet veneers.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\".\/stain-blocker-water-based-primer-general-finishes\"\u003eStain Blocker\u003c\/a\u003e cannot be tinted.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eAlways test your project's ENTIRE finishing schedule (from cleaning to topcoat) on an inside door or a more hidden area of the piece. This will not help if the yellowing occurs later, but at least you will know if there is an immediate problem.\u003c\/li\u003e\n\u003cli\u003eAvoid painting period furniture, such as a 1940s serpentine mahogany desk, with light colors. The pieces were often finished in stain that contained aniline dyes, which cast a pinkish bleed-through under light paint. Not every piece of furniture is suitable for upcycling with a light paint color. Pine, mahogany, and furniture of the 1940s and 50s are a red flag.\u003c\/li\u003e\n\u003cli\u003eLast, not all manufacturers' topcoats are compatible with other finishes and may react with a color change. Always follow best practices by not rushing, and testing to your satisfaction first.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eKnots\u003c\/h4\u003e\n\u003cp\u003eKnots in wood tend to bleed and are dense, making paint and stain adhesion a challenge. \u003ca href=\".\/stain-blocker-water-based-primer-general-finishes\"\u003eStain Blocker\u003c\/a\u003e may improve adhesion and prevent bleed-through for painting projects. Pine knots are especially difficult to cover with white or light paints. If you decide to paint over them, apply 3 coats of Stain Blocker first; however, we cannot guarantee adhesion or bleed-through blockage. You are better off using a dark paint on pine.\u003c\/p\u003e\n\u003c!--\/.accordion-content--\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- End: Yellowing \u0026 Clear Topcoat -----------------------------------------------\u003e \u003c!-- Storage of Water-Based Products ---------------------------------------------------\u003e\n\u003carticle\u003e\n\u003ch4\u003eStorage of Water-Based Products\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cp\u003ePlease be mindful of the manner in which water-based products are stored and how long they have been in storage. They are not a forever product.\u003c\/p\u003e\n\u003ch4\u003eLife of Product\u003c\/h4\u003e\n\u003cp\u003eWater-based products do not last forever, even when unopened. General Finishes products are best used within 1 year of the manufacture date listed on the can. However, the life of the product may be extended with proper care and storage (see Storage Tips below).\u003c\/p\u003e\n\u003cp\u003eWater-based products can last 3-5 years if the can is unopened, in good condition and stored in correct temperatures.\u003c\/p\u003e\n\u003cp\u003eProduct that is 3 years old will not look like product that is 6 months to 1 year old. You will see more stratification or separation as the product ages. Always stir thoroughly before using.\u003c\/p\u003e\n\u003ch4\u003eFoul Smell\u003c\/h4\u003e\n\u003cp\u003eIf your product has a foul smell, it is contaminated and no longer in useable condition.\u003c\/p\u003e\n\u003ch4\u003eClumps \u0026amp; Settling\u003c\/h4\u003e\n\u003cp\u003eGravity can cause some solids to settle on the bottom of the can and slight separation on the top. This is normal. If working with older product stir with a paint mixing attachment on a drill.\u003c\/p\u003e\n\u003cp\u003eIf the solids dissolve and clumps smooth out after mixing from the bottom, the product is in good condition for use.\u003c\/p\u003e\n\u003cp\u003eInability to reincorporate large, chunky lumps after stirring for several minutes is an indication that the product has frozen and can no longer be used.\u003c\/p\u003e\n\u003ch4\u003eStorage Tips\u003c\/h4\u003e\n\u003cp\u003eWater-based finishes crystalize and form a skin due to evaporation when the air-tight seal on a can is broken at first use. The following best practices will increase the life of your product:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ePry open sealed lids with a paint can opener by hooking under the lid's rolled edge. The use of a screwdriver can disfigure the rim and lid, impairing a complete seal.\u003c\/li\u003e\n\u003cli\u003eKeep lid closed while working. Pour what you will use into a bowl, paper cup, or plate, and close can lid as you work.\u003c\/li\u003e\n\u003cli\u003eClean the chime of the can thoroughly with a paper towel before closing to create a complete seal. Product falling into the chime can be minimized by using a pouring lid, such as Fitsall. Avoid wiping used brushes on the lid.\u003c\/li\u003e\n\u003cli\u003ePound the lid in place using a rubber mallet to avoid distorting the chime or lid. Dents in the lid from direct contact with a hammer can impair a complete seal. Alternatively, place a flat piece of wood over can lid and firmly pound shut.\u003c\/li\u003e\n\u003cli\u003eStore in moderate temperatures. Avoid temperatures below 50°F\/10°C or above 100°F\/26°C. Keep from freezing. Frozen and heat-damaged product cannot be revitalized. Temperature-controlled spaces, such as a basement, are ideal for storage. Do not store product in an attic, garage, in direct sunlight, or next to something warm like a water heater or furnace.\u003c\/li\u003e\n\u003cli\u003eStore can upside down to create a liquid seal, minimize evaporation and reduce the chance of crystallization. Decant remaining product from the can before stirring.\u003c\/li\u003e\n\u003cli\u003eDecant leftovers to a smaller container when the finish is almost used up. Alternative storage containers for water-based products are plastic FIFO bottles or glass bottles. Do not fill metal-lidded containers completely to prevent them from rusting.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eThe following water-based product mistures can be stored:\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eProduct thinned with up to 15% \u003ca href=\".\/water-based-extender-general-finishes-additives\"\u003eGeneral Finishes Extender\u003c\/a\u003e or \u003ca href=\".\/water-based-accelerator-general-finishes-additives\"\u003eGeneral Finishes Accelerator\u003c\/a\u003e, with the exception of thinned \u003ca href=\".\/water-based-wiping-stain-general-finishes\"\u003eGeneral Finishes Water Based Wood Stain\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eMixtures involving colors \u0026amp; sheens within the same product line, such as:\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Performance Satin + High Performance Gloss\u003c\/li\u003e\n\u003cli\u003eSnow White Milk Paint + Coastal Blue Milk Paint\u003c\/li\u003e\n\u003cli\u003eAmber Dye Stain + Merlot Dye Stain\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eThe following product mixtures should NOT be stored:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAny water based product with thinned tap water; water often contains bacteria that will adversely affect stored paint.\u003c\/li\u003e\n\u003cli\u003eTopcoat + Stain or Paint\u003c\/li\u003e\n\u003cli\u003eMilk Paint + Chalk Style Paint\u003c\/li\u003e\n\u003cli\u003eWater Based Wood Stain + Dye Stain\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!--\/.accordion-content--\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- End: Storage of Water-Based Products -----------------------------------------------\u003e \u003c!-- Furniture Care and Maintenance ---------------------------------------------------\u003e\n\u003carticle\u003e\n\u003ch4\u003eFurniture Care \u0026amp; Maintenance\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003ch4\u003eCure First\u003c\/h4\u003e\n\u003cp\u003eYou have just finished applying a fine furniture finish. Treat gently until the paint or topcoat have fully cured. Allow 21 days for a water-based finish to cure and 30 days for an oil-based finish to cure before cleaning.\u003c\/p\u003e\n\u003ch4\u003eRegular Cleaning and Maintenance\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eRemove dust with a water-dampened cloth. Dust can build up over time and may scratch or dull finishes if not removed regularly.\u003c\/li\u003e\n\u003cli\u003eRemove fingerprints, cooking fumes and smoking residue with mild soap and water. These contaminants will not harm the finish, but they accumulate on surfaces and dull the original luster.\u003c\/li\u003e\n\u003cli\u003eAs with all fine furniture finishes, avoid using furniture polish, cleaners or dusting sprays that contain silicone, alcohol, ammonia and anything acidic. Exception: We have successfully cleaned with Clorox wipes.\u003c\/li\u003e\n\u003cli\u003eClean up water, alcohol and food spills in a timely manner and use placemats \u0026amp; coasters to protect the finish.\u003c\/li\u003e\n\u003cli\u003eFuture finishes or touch-ups may not adhere properly or perform as desired over a contaminated surface. Some contaminants, such as silicone, seep through finish into the wood and often cannot be removed.\u003c\/li\u003e\n\u003cli\u003eAvoid excessive exposure to direct sunlight, high temperatures or high humidity. These can damage furniture and finishes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!--\/.accordion-content--\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- End: Furniture Care and Maintenance -----------------------------------------------\u003e \u003c!-- Supporting Videos ---------------------------------------------------\u003e\n\u003carticle\u003e\n\u003ch4\u003eSupporting Instructional Videos\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-4 col-md-6 text-center\"\u003e\n\u003cdiv class=\"video-wrapper\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/yDKZFGvpYpw\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-lg-4 col-md-6 text-center\"\u003e\n\u003cdiv class=\"video-wrapper\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/B2sMjYUCtwg\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-lg-4 col-md-6 text-center\"\u003e\n\u003cdiv class=\"video-wrapper\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/SUp_x4fDzqk\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-lg-4 col-md-6 text-center\"\u003e\n\u003cdiv class=\"video-wrapper\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/torOAQy91q4\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-lg-4 col-md-6 text-center\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-4 col-md-6 text-center\"\u003e\n\u003cdiv class=\"video-wrapper\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/K9bPxy76kmA\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!--\/.accordion-content--\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- End: Supporting Videos -----------------------------------------------\u003e\n\u003c\/div\u003e\n\u003c!-- End Accordian: Instructions -----------------------------------------------\u003e","brand":"General Finishes","offers":[{"title":"Pint \/ Flat","offer_id":8114245206135,"sku":"GF-HPFP","price":28.5,"currency_code":"USD","in_stock":false},{"title":"Pint \/ Satin","offer_id":8114244943991,"sku":"GF-HPSP","price":28.5,"currency_code":"USD","in_stock":true},{"title":"Pint \/ Semi-Gloss","offer_id":8114244812919,"sku":"GF-HPSGP","price":28.5,"currency_code":"USD","in_stock":false},{"title":"Pint \/ Gloss","offer_id":8114245075063,"sku":"GF-HPGP","price":28.5,"currency_code":"USD","in_stock":false},{"title":"Pint \/ Dead Flat","offer_id":41909231517763,"sku":"GF-HPDFP","price":37.5,"currency_code":"USD","in_stock":false},{"title":"Quart \/ Flat","offer_id":8114245173367,"sku":"GF-HPFQ","price":41.5,"currency_code":"USD","in_stock":true},{"title":"Quart \/ Satin","offer_id":8114244911223,"sku":"GF-HPSQ","price":41.5,"currency_code":"USD","in_stock":true},{"title":"Quart \/ Semi-Gloss","offer_id":8114244780151,"sku":"GF-HPSGQ","price":41.5,"currency_code":"USD","in_stock":true},{"title":"Quart \/ Gloss","offer_id":8114245042295,"sku":"GF-HPGQ","price":41.5,"currency_code":"USD","in_stock":true},{"title":"Quart \/ Dead Flat","offer_id":41909231550531,"sku":"GF-HPDFQ","price":62.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Flat","offer_id":8114245238903,"sku":"GF-HPFG","price":108.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Satin","offer_id":8114244976759,"sku":"GF-HPSG","price":108.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Semi-Gloss","offer_id":8114244845687,"sku":"GF-HPSGG","price":108.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Gloss","offer_id":8114245107831,"sku":"GF-HPGG","price":108.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Dead Flat","offer_id":41909231583299,"sku":"GF-HPDFG","price":170.0,"currency_code":"USD","in_stock":true},{"title":"5 Gallon \/ Flat","offer_id":8114245271671,"sku":"GF-HPF5G","price":430.0,"currency_code":"USD","in_stock":true},{"title":"5 Gallon \/ Satin","offer_id":8114245009527,"sku":"GF-HPS5G","price":430.0,"currency_code":"USD","in_stock":true},{"title":"5 Gallon \/ Semi-Gloss","offer_id":8114244878455,"sku":"GF-HPSG5G","price":430.0,"currency_code":"USD","in_stock":true},{"title":"5 Gallon \/ Gloss","offer_id":8114245140599,"sku":"GF-HPG5G","price":430.0,"currency_code":"USD","in_stock":true},{"title":"5 Gallon \/ Dead Flat","offer_id":41909231616067,"sku":"GF-HPDF5G","price":715.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/7892\/files\/gf-product-render-WATER-BASED-TOPCOAT-HIGH-PERFORMANCE-flat-PINT-CLOSED-1000PX-general-finishes-2023.jpg?v=1730315484"},{"product_id":"water-based-glaze-general-finishes-finish-effects","title":"General Finishes Water Based Glaze, Finish Effects","description":"\u003cp\u003eGeneral Finishes Water-Based Glaze Effects are translucent water-based colors used to create beautiful decorative finishes such as marbling, shabby chic, burnishing and color washing. Use over Water Based Wood Stains, Milk Paints, Chalk Style Paints and Pearl Effects. Glaze Effects can be intermixed, layered to create richer looks and custom colors.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Winter White \/ Quart","offer_id":8114245369975,"sku":"GF-GWWQ","price":34.0,"currency_code":"USD","in_stock":true},{"title":"Winter White \/ Pint","offer_id":8114245402743,"sku":"GF-GWWP","price":21.0,"currency_code":"USD","in_stock":false},{"title":"Winter White \/ Gallon","offer_id":30326908387395,"sku":"GF-GWWG","price":74.0,"currency_code":"USD","in_stock":true},{"title":"Van Dyke Brown \/ Quart","offer_id":8114245435511,"sku":"GF-GVBQ","price":34.0,"currency_code":"USD","in_stock":true},{"title":"Van Dyke Brown \/ Pint","offer_id":8114245468279,"sku":"GF-GVBP","price":21.0,"currency_code":"USD","in_stock":false},{"title":"Van Dyke Brown \/ Gallon","offer_id":30326887972931,"sku":"GF-GVBG","price":74.0,"currency_code":"USD","in_stock":true},{"title":"Pitch Black \/ Quart","offer_id":8114245566583,"sku":"GF-GPBLQ","price":34.0,"currency_code":"USD","in_stock":true},{"title":"Pitch Black \/ Pint","offer_id":8114245599351,"sku":"GF-GPBLP","price":21.0,"currency_code":"USD","in_stock":false},{"title":"Pitch Black \/ Gallon","offer_id":30326888005699,"sku":"GF-GPBLG","price":74.0,"currency_code":"USD","in_stock":true},{"title":"Burnt Umber \/ Quart","offer_id":8114245697655,"sku":"GF-GBUQ","price":34.0,"currency_code":"USD","in_stock":true},{"title":"Burnt Umber \/ Pint","offer_id":8114245730423,"sku":"GF-GBUP","price":21.0,"currency_code":"USD","in_stock":true},{"title":"Burnt Umber \/ Gallon","offer_id":30326888071235,"sku":"GF-GBUG","price":74.0,"currency_code":"USD","in_stock":true},{"title":"Smokey Gray \/ Quart","offer_id":31448351375427,"sku":"GF-GSGYQ","price":34.0,"currency_code":"USD","in_stock":true},{"title":"Smokey Gray \/ Pint","offer_id":31448351834179,"sku":"GF-GSGYP","price":21.0,"currency_code":"USD","in_stock":false},{"title":"Smokey Gray \/ Gallon","offer_id":31448352882755,"sku":"GF-GSGYG","price":74.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/7892\/products\/qtyo.png?v=1577706305"},{"product_id":"exterior-450-water-based-wiping-stain-general-finishes","title":"General Finishes Exterior 450 Water Based Wiping Stain","description":"\u003c!-- Start: Topcoat Description -----------------------------------------------\u003e\n\u003cp\u003eGeneral Finishes Exterior 450 Stains are premium quality, pigmented wood stains designed for outdoor projects with vertical surfaces such fences, patio furniture, garage doors, entrance doors, outdoor kitchens and interior windows. These water-based outdoor wood stains are not recommended for a deck finish. Exterior 450 Stains contain U.V. absorbers to protect the finish and mildewcides to slow mold and mildew growth.\u003c\/p\u003e\n\u003cp\u003ePlease click the below headers to reveal the instructional info for this product.\u003c\/p\u003e\n\u003c!-- Start Accordian: Instructions -----------------------------------------------\u003e\n\u003cdiv\u003e\n\u003c!-- Step 1: Preparation of Raw Wood for Water Based Stain -------------------------------------\u003e\n\u003carticle\u003e\n\u003ch4\u003eStep 1: Preparation of Raw Wood for Water Based Stain\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cp\u003eBefore applying stain, all raw wood projects require preparation sanding, and all existing finishes require prep cleaning and sanding. If you skip this critical step, your finish may fail.\u003c\/p\u003e\n\u003ch4\u003ePrep Sanding for Raw Wood Projects\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eSand open-grain wood (e.g., oak, ash, mahogany, parawood) with 120-grit sandpaper, followed by 150-grit, then 180-grit.\u003c\/li\u003e\n\u003cli\u003eSand closed-grain wood (e.g., cherry, pine, maple, birch, alder) with 150-grit sandpaper followed by 220-grit.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003cli\u003eDo not over-sand with fine-grit sandpapers; this will close and seal the wood grain, preventing ideal color absorption.\u003c\/li\u003e\n\u003cli\u003eDo NOT use steel wool with water-based finishes; the particles will get trapped in the finish and rust.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003ePrep Sanding for Existing Finish\u003c\/h4\u003e\n\u003col\u003e\n\u003col\u003e\n\u003cli\u003eRemove any existing finish by sanding with 120-grit-sandpaper \u0026amp; scuffing with a wire brush if needed.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eReducing Grain Raise on Raw Wood\u003c\/h4\u003e\n\u003cp\u003eTo reduce grain raise, dampen the wood with water after prep sanding. Let dry completely, then lightly sand with fine-grade (220-320) foam sanding pad.\u003c\/p\u003e\n\u003c!--\/.accordion-content--\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- End: Accordian Step 1 -----------------------------------------------\u003e \u003c!-- Step 2: How To Apply General Finishes Exterior 450 Stain ------------------------------------------\u003e\n\u003carticle\u003e\n\u003ch4\u003eStep 2: How To Apply General Finishes Exterior 450 Stain\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003ch4\u003eGeneral Finishes Exterior 450 Water Based Wood Stain Application Steps\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eStir stain to reincorporate solids that have settled to the bottom of the can before and throughout the application process.\u003c\/li\u003e\n\u003cli\u003eThin as desired with distilled water; start with 5%, increase up to 10% by volume.\u003c\/li\u003e\n\u003cli\u003eIncrease open time, if needed, with up to 5% \u003ca href=\".\/water-based-extender-general-finishes-additives\"\u003eGeneral Finishes Extender\u003c\/a\u003e if allowed by local regulations. \u003ca href=\".\/water-based-extender-general-finishes-additives\"\u003eGF Extender\u003c\/a\u003e will improve flow and leveling and increase open time, which is helpful in dry climates. California Residents: Adding more than 2% of \u003ca href=\".\/water-based-extender-general-finishes-additives\"\u003eGF Extender\u003c\/a\u003e will make the products non-compliant per SCAQMD Regulations. GF assumes no liability for the improper use of these products.\u003c\/li\u003e\n\u003cli\u003eTest your complete finishing process before starting. Stain color is affected by variances in wood and deepened by the application of topcoat.\u003c\/li\u003e\n\u003cli\u003eDivide your project into manageable sections: top, side, drawer, door, table seam.\u003c\/li\u003e\n\u003cli\u003eHand-Application Over Raw Wood:\n\u003cul\u003e\n\u003cli\u003eApply a LIBERAL amount of stain to ensure easy workability using a synthetic bristle brush, foam brush, pad applicator or short-nap roller. If not enough stain is used, the surface may dry too quickly, causing an uneven appearance. On large projects, leave wet edge between sections to prevent lap lines between sections.\u003c\/li\u003e\n\u003cli\u003eWipe off the excess evenly with the grain using quality paper towel or shop towel. Check for missed spots and lap marks before moving to the next section. Do NOT use cotton t-shirts to wipe away stain because they will \"push\" the stain around and not absorb it.\u003c\/li\u003e\n\u003cli\u003eImmediately correct lap marks by rewetting the entire working area with stain and wiping off the excess.\u003c\/li\u003e\n\u003cli\u003ePull excess stain out of corners and detail with a synthetic bristle brush.\u003c\/li\u003e\n\u003cli\u003eLet the stain dry 2+ hours when applying 1 coat in ideal conditions, 70°F\/20°C, 50-70% humidity. Increase dry time if:\n\u003cul\u003e\n\u003cli\u003eHumidity is over 80%\u003c\/li\u003e\n\u003cli\u003eA second coat is applied\u003c\/li\u003e\n\u003cli\u003eThick coats are applied\u003c\/li\u003e\n\u003cli\u003eTo accelerate drying in humid conditions add \u003ca href=\".\/water-based-accelerator-general-finishes-additives\"\u003eGeneral Finishes Accelerator\u003c\/a\u003e to Exterior 450 Stain before applying and work in a space with good ventilation and air movement. If you decide to re-coat before the recommended time, test dryness.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eSpray Application:\n\u003cul\u003e\n\u003cli\u003eBefore spraying, strain topcoat through a fine-mesh filter.\u003c\/li\u003e\n\u003cli\u003eSpray wet films at 3-5-mil thickness. HVLP: 1.1mm-1.3mm spray tip, medium air cap. Verify tip sizes with your equipment supplier. \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0062\/7892\/files\/gf-hvlp-spray-tip-sizes.pdf?13835\"\u003eSee our general guide for spray tip sizes\u003c\/a\u003e. Wear a full filter respirator (NIOSH\/MSHA-approved) and, if spraying in an interior space, make sure there is good ventilation. Keep your gun at a 90° angle, 6-8\" from the surface. On large, flat areas, use wet, even patterns 6-8\" wide. For narrow surfaces, reduce the fan pattern to 2-3\" wide to reduce overspray. Overlap each pass 50% for even coverage. Wipe back the excess with an absorbent cloth.\u003c\/li\u003e\n\u003cli\u003eLet the stain dry 2+ hours in ideal conditions (50-70% humidity, 70°F). Increase dry time if:\n\u003cul\u003e\n\u003cli\u003eHumidity is over 80%\u003c\/li\u003e\n\u003cli\u003eA second coat is applied\u003c\/li\u003e\n\u003cli\u003eThick coats are applied\u003c\/li\u003e\n\u003cli\u003eTo accelerate drying in humid conditions add \u003ca href=\".\/water-based-accelerator-general-finishes-additives\"\u003eGeneral Finishes Accelerator\u003c\/a\u003e to Exterior 450 Stain before applying and work in a space with good ventilation and air movement. If you decide to re-coat before the recommended time, test dryness.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eOptional: apply a second coat to deepen the color. Apply no more than 2 coats.\u003c\/li\u003e\n\u003cli\u003eFinish with 3 coats of General Finishes Exterior 450 Topcoat.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eWarning: Do not use water-based products with Linseed Oils or Danish Oils.\u003c\/p\u003e\n\u003c!--\/.accordion-content--\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- End: Accordian Step 2 -----------------------------------------------\u003e \u003c!-- Step 3: Topcoat Over Exterior 450 Stain ---------------------------------------------------\u003e\n\u003carticle\u003e\n\u003ch4\u003eTopcoat Over Exterior 450 Stain\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cp\u003eAlways seal General Finishes Exterior 450 Stain with 3 coats exterior-rated topcoat. We recommend General Finishes Exterior 450 Topcoat, which is formulated to be compatible with Exterior 450 Stain.\u003c\/p\u003e\n\u003cp\u003eExterior 450 Topcoat is designed to allow water permeate the finish and, as it dries, the water releases back out to allow the finish to tighten down again.\u003c\/p\u003e\n\u003cp\u003eHorizontal surfaces and uncured surfaces with sitting water may cloud or blush temporarily as the finish dries. Once fully cured, any blushing that occurs should be minimal.\u003c\/p\u003e\n\u003c!--\/.accordion-content--\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- End: Accordian Step 3 ------------------------------------------------------------\u003e \u003c!-- Storage of Water-Based Products ---------------------------------------------------\u003e\n\u003carticle\u003e\n\u003ch4\u003eStorage of Water-Based Products\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cp\u003ePlease be mindful of the manner in which water-based products are stored and how long they have been in storage. They are not a forever product.\u003c\/p\u003e\n\u003ch4\u003eLife of Product\u003c\/h4\u003e\n\u003cp\u003eWater-based products do not last forever, even when unopened. General Finishes products are best used within 1 year of the manufacture date listed on the can. However, the life of the product may be extended with proper care and storage (see Storage Tips below).\u003c\/p\u003e\n\u003cp\u003eWater-based products can last 3-5 years if the can is unopened, in good condition and stored in correct temperatures.\u003c\/p\u003e\n\u003cp\u003eProduct that is 3 years old will not look like product that is 6 months to 1 year old. You will see more stratification or separation as the product ages. Always stir thoroughly before using.\u003c\/p\u003e\n\u003ch4\u003eFoul Smell\u003c\/h4\u003e\n\u003cp\u003eIf your product has a foul smell, it is contaminated and no longer in useable condition.\u003c\/p\u003e\n\u003ch4\u003eClumps \u0026amp; Settling\u003c\/h4\u003e\n\u003cp\u003eGravity can cause some solids to settle on the bottom of the can and slight separation on the top. This is normal. If working with older product stir with a paint mixing attachment on a drill.\u003c\/p\u003e\n\u003cp\u003eIf the solids dissolve and clumps smooth out after mixing from the bottom, the product is in good condition for use.\u003c\/p\u003e\n\u003cp\u003eInability to reincorporate large, chunky lumps after stirring for several minutes is an indication that the product has frozen and can no longer be used.\u003c\/p\u003e\n\u003ch4\u003eStorage Tips\u003c\/h4\u003e\n\u003cp\u003eWater-based finishes crystalize and form a skin due to evaporation when the air-tight seal on a can is broken at first use. The following best practices will increase the life of your product:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ePry open sealed lids with a paint can opener by hooking under the lid's rolled edge. The use of a screwdriver can disfigure the rim and lid, impairing a complete seal.\u003c\/li\u003e\n\u003cli\u003eKeep lid closed while working. Pour what you will use into a bowl, paper cup, or plate, and close can lid as you work.\u003c\/li\u003e\n\u003cli\u003eClean the chime of the can thoroughly with a paper towel before closing to create a complete seal. Product falling into the chime can be minimized by using a pouring lid, such as Fitsall. Avoid wiping used brushes on the lid.\u003c\/li\u003e\n\u003cli\u003ePound the lid in place using a rubber mallet to avoid distorting the chime or lid. Dents in the lid from direct contact with a hammer can impair a complete seal. Alternatively, place a flat piece of wood over can lid and firmly pound shut.\u003c\/li\u003e\n\u003cli\u003eStore in moderate temperatures. Avoid temperatures below 50°F\/10°C or above 100°F\/26°C. Keep from freezing. Frozen and heat-damaged product cannot be revitalized. Temperature-controlled spaces, such as a basement, are ideal for storage. Do not store product in an attic, garage, in direct sunlight, or next to something warm like a water heater or furnace.\u003c\/li\u003e\n\u003cli\u003eStore can upside down to create a liquid seal, minimize evaporation and reduce the chance of crystallization. Decant remaining product from the can before stirring.\u003c\/li\u003e\n\u003cli\u003eDecant leftovers to a smaller container when the finish is almost used up. Alternative storage containers for water-based products are plastic FIFO bottles or glass bottles. Do not fill metal-lidded containers completely to prevent them from rusting.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eThe following water-based product mistures can be stored:\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eProduct thinned with up to 15% \u003ca href=\".\/water-based-extender-general-finishes-additives\"\u003eGeneral Finishes Extender\u003c\/a\u003e or \u003ca href=\".\/water-based-accelerator-general-finishes-additives\"\u003eGeneral Finishes Accelerator\u003c\/a\u003e, with the exception of thinned \u003ca href=\".\/water-based-wiping-stain-general-finishes\"\u003eGeneral Finishes Water Based Wood Stain\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eMixtures involving colors \u0026amp; sheens within the same product line, such as:\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Performance Satin + High Performance Gloss\u003c\/li\u003e\n\u003cli\u003eSnow White Milk Paint + Coastal Blue Milk Paint\u003c\/li\u003e\n\u003cli\u003eAmber Dye Stain + Merlot Dye Stain\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eThe following product mixtures should NOT be stored:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAny water based product with thinned tap water; water often contains bacteria that will adversely affect stored paint.\u003c\/li\u003e\n\u003cli\u003eTopcoat + Stain or Paint\u003c\/li\u003e\n\u003cli\u003eMilk Paint + Chalk Style Paint\u003c\/li\u003e\n\u003cli\u003eWater Based Wood Stain + Dye Stain\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!--\/.accordion-content--\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- End: Storage of Water-Based Products -----------------------------------------------\u003e \u003c!-- Supporting Videos ---------------------------------------------------\u003e\n\u003carticle\u003e\n\u003ch4\u003eSupporting Instructional Videos\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-4 col-md-6 text-center\"\u003e\n\u003cdiv class=\"video-wrapper\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-lg-4 col-md-6 text-center\"\u003e\n\u003cdiv class=\"video-wrapper\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/yINVKwRGsLY\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-lg-4 col-md-6 text-center\"\u003e\n\u003cdiv class=\"video-wrapper\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!--\/.accordion-content--\u003e\n\u003c\/div\u003e\n\u003c!-- End: Supporting Videos -----------------------------------------------\u003e\n\u003c\/div\u003e\n\u003c!-- End Accordian: Instructions -----------------------------------------------\u003e\u003c\/article\u003e\n\u003c\/div\u003e","brand":"General Finishes","offers":[{"title":"Quart \/ Red Mahogany","offer_id":8114245828727,"sku":"GF-XSRMQ","price":36.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Red Mahogany","offer_id":8114245861495,"sku":"GF-XSRMG","price":83.0,"currency_code":"USD","in_stock":true},{"title":"Quart \/ Natural Base","offer_id":8114245959799,"sku":"GF-XSNQ","price":36.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Natural Base","offer_id":8114245992567,"sku":"GF-XSNG","price":83.0,"currency_code":"USD","in_stock":true},{"title":"Quart \/ Coffee Bean","offer_id":8114246025335,"sku":"GF-XSCBQ","price":36.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Coffe Bean","offer_id":8114246058103,"sku":"GF-XSCBG","price":83.0,"currency_code":"USD","in_stock":true},{"title":"Quart \/ Chestnut","offer_id":8114246090871,"sku":"GF-XSCHQ","price":36.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Chestnut","offer_id":8114246123639,"sku":"GF-XSCHG","price":83.0,"currency_code":"USD","in_stock":true},{"title":"Quart \/ Cedar","offer_id":8114246156407,"sku":"GF-XSCDQ","price":36.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Cedar","offer_id":8114246189175,"sku":"GF-XSCDG","price":83.0,"currency_code":"USD","in_stock":true},{"title":"Quart \/ Butternut","offer_id":8114246221943,"sku":"GF-XSBNQ","price":36.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Butternut","offer_id":8114246254711,"sku":"GF-XSBNG","price":83.0,"currency_code":"USD","in_stock":true},{"title":"Quart \/ Black Walnut","offer_id":8114246287479,"sku":"GF-XSBWQ","price":36.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Black Walnut","offer_id":8114246320247,"sku":"GF-XSBWG","price":83.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/7892\/products\/qxsm.jpg?v=1658327436"},{"product_id":"exterior-450-water-based-top-coat-general-finishes","title":"General Finishes Exterior 450 Water Based Top Coat","description":"\u003cp\u003eGeneral Finishes Exterior 450 Outdoor Top Coat is a clear-drying finish suitable for vertical exterior surfaces, such as fences, patio furniture, garage doors, entrance doors, and interior windows. It is not recommended as a deck finish. The exterior 450 outdoor top coat is fortified with UV absorbers to stabilize the finish and built-in mildewcide to retard mold and mildew growth. It performs well as a clear coat or as an optional topcoat over General Finishes Milk Paint.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Quart \/ Flat","offer_id":8114246647927,"sku":"GF-XCFQ","price":41.0,"currency_code":"USD","in_stock":true},{"title":"Quart \/ Satin","offer_id":8114246451319,"sku":"GF-XCSQ","price":41.0,"currency_code":"USD","in_stock":true},{"title":"Quart \/ Semi-Gloss","offer_id":8114246353015,"sku":"GF-XCSGQ","price":41.0,"currency_code":"USD","in_stock":true},{"title":"Quart \/ Gloss","offer_id":8114246549623,"sku":"GF-XCGQ","price":41.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Flat","offer_id":8114246680695,"sku":"GF-XCFG","price":93.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Satin","offer_id":8114246484087,"sku":"GF-XCSG","price":93.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Semi-Gloss","offer_id":8114246385783,"sku":"GF-XCSGG","price":93.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Gloss","offer_id":8114246582391,"sku":"GF-XCGG","price":93.0,"currency_code":"USD","in_stock":true},{"title":"5 Gallon \/ Flat","offer_id":8114246713463,"sku":"GF-XCF5G","price":380.0,"currency_code":"USD","in_stock":true},{"title":"5 Gallon \/ Satin","offer_id":8114246516855,"sku":"GF-XCS5G","price":380.0,"currency_code":"USD","in_stock":true},{"title":"5 Gallon \/ Semi-Gloss","offer_id":8114246418551,"sku":"GF-XCSG5G","price":380.0,"currency_code":"USD","in_stock":true},{"title":"5 Gallon \/ Gloss","offer_id":8114246615159,"sku":"GF-XCG5G","price":380.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/7892\/files\/gf-product-render-WATER-BASED-EXTERIOR-450-CLEAR-TOPCOAT-flat-QUART-1000PX-general-finishes-2023.jpg?v=1730313693"},{"product_id":"clear-enduro-var-ii-water-based-top-coat-general-finishes","title":"General Finishes Clear Enduro-Var II Water Based Top Coat","description":"\u003cp\u003e\u003cspan\u003eEnduro-Var II is a reformulation of our original oil-modified, ambering, water-based topcoat. \u003c\/span\u003e\u003cspan\u003eIt replaces original Enduro-Var and is \u003c\/span\u003emade with more than 70% RENEWABLE RESOURCES formulated from sustainable materials that decrease the carbon footprint \u003cspan\u003eand is compatible with ALL GF products. The newer environment-friendly formula dries to a lighter amber than the previous formula, is \u003c\/span\u003e\u003cspan\u003ehighly water-resistant, and is both sprayable and brushable.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Quart \/ Satin","offer_id":8114246910071,"sku":"GF-EVSQ","price":56.5,"currency_code":"USD","in_stock":true},{"title":"Quart \/ Semi-Gloss","offer_id":8114246811767,"sku":"GF-EVSGQ","price":56.5,"currency_code":"USD","in_stock":true},{"title":"Quart \/ Gloss","offer_id":8114247008375,"sku":"GF-EVGQ","price":56.5,"currency_code":"USD","in_stock":true},{"title":"Quart \/ Flat","offer_id":8114247106679,"sku":"GF-EVFQ","price":56.5,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Satin","offer_id":8114246942839,"sku":"GF-EVSG","price":137.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Semi-Gloss","offer_id":8114246844535,"sku":"GF-EVSGG","price":137.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Gloss","offer_id":8114247041143,"sku":"GF-EVGG","price":137.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Flat","offer_id":8114247139447,"sku":"GF-EVFG","price":137.0,"currency_code":"USD","in_stock":true},{"title":"5 Gallon \/ Satin","offer_id":8114246975607,"sku":"GF-EVS5G","price":590.0,"currency_code":"USD","in_stock":false},{"title":"5 Gallon \/ Flat","offer_id":8114247172215,"sku":"GF-EVF5G","price":590.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/7892\/products\/enduro-var-II.png?v=1627649342"},{"product_id":"water-based-dye-stain-general-finishes","title":"General Finishes Water Based Dye Stain","description":"\u003c!-- Start: Topcoat Description -----------------------------------------------\u003e\n\u003cp\u003eWater-based Dye Stains penetrate deep into the wood to beautifully magnify the grain. They will provide your project with more depth and color vibrancy than any other wood stain. This product is excellent for highly figured woods like mahogany, walnut or maple. Dye stains can also be used as a toner when mixed with Water Based Topcoats.\u003c\/p\u003e\n\u003cp\u003ePlease click the below headers to reveal the instructional info for this product.\u003c\/p\u003e\n\u003c!-- Start Accordian: Instructions -----------------------------------------------\u003e\n\u003cdiv\u003e\n\u003c!-- Step 1: Preparation of Dye Stain -------------------------------------\u003e\n\u003carticle\u003e\n\u003ch4\u003eStep 1: Preparation of Dye Stain\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cp\u003eBefore applying stain, all raw wood projects require preparation sanding. If you skip this critical step, your finish may fail.\u003c\/p\u003e\n\u003ch4\u003ePreparation for Raw Wood Projects\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eSand open-grain wood (e.g., oak, ash, mahogany, parawood) with 120-grit sandpaper, followed by 150-grit, then 180-grit.\u003c\/li\u003e\n\u003cli\u003eSand closed-grain wood (e.g., cherry, pine, maple, birch, alder) with 150-grit sandpaper followed by 220-grit.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003cli\u003eDo not over-sand with fine-grit sandpapers; this will close and seal the wood grain, preventing ideal color absorption.\u003c\/li\u003e\n\u003cli\u003eDo NOT use steel wool with water-based finishes; the particles will get trapped in the finish and rust.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eReducing Grain Raise on Raw Wood\u003c\/h4\u003e\n\u003cp\u003eTo reduce grain raise, dampen the wood with water after prep sanding. Let dry completely, then lightly sand with fine-grade (220-320) foam sanding pad.\u003c\/p\u003e\n\u003c!--\/.accordion-content--\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- End: Accordian Step 1 -----------------------------------------------\u003e \u003c!-- Step 2: How To Apply General Finishes Dye Stain ------------------------------------------\u003e\n\u003carticle\u003e\n\u003ch4\u003eStep 2: How To Apply General Finishes Dye Stain\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003ch4\u003eGeneral Finishes Dye Stain Application Steps\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eStir stain to reincorporate solids that have settled to the bottom of the can before and throughout the application process.\u003c\/li\u003e\n\u003cli\u003eIncrease open time, if needed, with up to 5% \u003ca href=\".\/water-based-extender-general-finishes-additives\"\u003eGeneral Finishes Extender\u003c\/a\u003e, if allowed by local regulations. \u003ca href=\".\/water-based-extender-general-finishes-additives\"\u003eExtender\u003c\/a\u003e will improve flow and leveling and increase open time, which is helpful in dry climates. California Residents: Adding more than 2% of \u003ca href=\".\/water-based-extender-general-finishes-additives\"\u003eGF Extender\u003c\/a\u003e will make the product non-compliant per SCAQMD Regulations. GF assumes no liability for the improper use of these products.\u003c\/li\u003e\n\u003cli\u003eAn initial coat of \u003ca href=\".\/water-based-pre-stain-wood-conditioner-general-finishes\"\u003eGeneral Finishes Pre-Stain Conditioner Natural\u003c\/a\u003e can improve color uniformity over difficult-to-stain wood species such as pine. However, it will limit color absorption, so a darker stain may be required to get the depth of color you want.\u003c\/li\u003e\n\u003cli\u003eTest your complete finishing process beforehand. Stain color can be affected by variances in wood, room lighting, and deepened with the application of topcoat.\u003c\/li\u003e\n\u003cli\u003eDivide your project into manageable sections: top, side, drawer, door, table seam.\u003c\/li\u003e\n\u003cli\u003eApply 1-2 coats. A second coat will create a deeper, richer color. Do not apply more than 2 coats.\n\u003cul\u003e\n\u003cli\u003eHand application: Apply a LIBERAL amount of dye stain using a cloth, a synthetic bristle brush, foam brush, pad applicator or roller. Dye Stain penetrates the surface fast; if not enough stain is used, the surface may dry too quickly, causing an uneven appearance. Stain one complete section, such as a side, top, or drawer, and immediately wipe off excess evenly with a cloth, paper or shop towel before starting the next section.\u003c\/li\u003e\n\u003cli\u003eSpray application: Before spraying, strain topcoat through a fine-mesh filter. Spray wet films at 3-5-mil thickness. HVLP: 1.1mm-1.3mm spray tip, medium air cap. Verify tip sizes with your equipment supplier. \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0062\/7892\/files\/gf-hvlp-spray-tip-sizes.pdf?13835\"\u003eSee our general guide for spray tip sizes\u003c\/a\u003e. Wear a full filter respirator (NIOSH\/MSHA approved) and work in a ventilated space. Keep your gun at a 90° angle, 6-8\" from the surface. On large, flat areas, use wet, even patterns 6-8\" wide. For narrow surfaces, reduce the fan pattern to 2-3\" wide to reduce overspray. Overlap each pass of stain 50% for even coverage. If coverage is even, there is no need to wipe. If you have issues with uneven coverage, wipe back the excess with an absorbent cloth.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDry 2+ hours between coats in ideal conditions: 70°F\/20°C; 50-70% humidity. Inadequate dry time is one of the top reasons for finish failure. If in doubt, wait longer. Increase dry time if humidity is over 80%:\n\u003cul\u003e\n\u003cli\u003eTo accelerate drying in humid conditions, add \u003ca href=\".\/water-based-accelerator-general-finishes-additives\"\u003eGeneral Finishes Accelerator\u003c\/a\u003e and work in a space with good ventilation and air movement. If you decide to re-coat before the recommended time, test dryness.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eAllow final coat to dry 2-4 hours in ideal conditions: 50-70% humidity, 70°F\/20°C.\u003c\/li\u003e\n\u003cli\u003eFinish with 3 coats of General Finishes topcoat.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eWarning: Do not use water-based products with Linseed Oils or Danish Oils.\u003c\/p\u003e\n\u003c!--\/.accordion-content--\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- End: Accordian Step 2 -----------------------------------------------\u003e \u003c!-- Step 3: Topcoat Over Water-Based Stain ---------------------------------------------------\u003e\n\u003carticle\u003e\n\u003ch4\u003eTopcoat Over Water-Based Stain\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cp\u003eAlways seal \u003ca href=\".\/water-based-wiping-stain-general-finishes\"\u003eGeneral Finishes Water Based Wood Stain\u003c\/a\u003e, General Finishes Dye Stain and \u003ca href=\".\/water-based-wiping-stain-general-finishes-ready-to-mix-rtm\"\u003eGeneral Finishes Enduro Ready-To-Match (RTM) Water Based Wood Stain\u003c\/a\u003e with 3 coats of topcoat. More coats will not improve durability.\u003c\/p\u003e\n\u003ch4\u003eRecommended Water-Based Topcoats\u003c\/h4\u003e\n\u003cp\u003e\u003ca href=\".\/water-based-clear-high-performance-poly-top-coat-general-finishes\"\u003eGeneral Finishes High Performance\u003c\/a\u003e can be applied by hand or sprayed; \u003ca href=\".\/clear-water-based-poly-top-coat-general-finishes\"\u003eGeneral Finishes Enduro Clear Poly\u003c\/a\u003e is spray-only. Both topcoats dry clear and are great for high-use surfaces, such as kitchen cabinets and tabletops. \u003ca href=\".\/flat-out-flat-clear-water-based-wax-top-coat-general-finishes\"\u003eGeneral Finishes Flat Out Flat\u003c\/a\u003e is our flattest topcoat, suitable for projects that do not receive major wear.\u003c\/p\u003e\n\u003c!--\/.accordion-content--\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- End: Accordian Step 3 ------------------------------------------------------------\u003e \u003c!-- Creative Finishing Techniques Using Dye Stain ---------------------------------------------------\u003e\n\u003carticle\u003e\n\u003ch4\u003eCreative Finishing Techniques Using Dye Stain\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003ch4\u003eCustom Colors using Dye Stain Reducer\u003c\/h4\u003e\n\u003cp\u003eCreate custom color Dye Stains by adding \u003ca href=\".\/water-based-dye-stain-reducer-general-finishes\"\u003eGeneral Finishes Dye Stain Reducer\u003c\/a\u003e in 10% increments until you achieve the color you want. It is not possible to mix too much of our Dye Stain or Reducer together. Do NOT Use Water to Lighten General Finishes Dye Stains. \u003ca href=\".\/\"\u003eDye Stain Reducer\u003c\/a\u003e has ingredients that help keep color molecules dispersed evenly in the can.\u003c\/p\u003e\n\u003ch4\u003eLayering Dye Stain\u003c\/h4\u003e\n\u003cp\u003eUse Dye Stains to highlight the depth of the grain, to even out color saturation, and to achieve deeper colors under other stain applications. Example: Use Amber or Yellow Dye Stain for a golden glow under \u003ca href=\".\/\"\u003eGeneral Finishes Gel Stain\u003c\/a\u003e or \u003ca href=\".\/\"\u003eGeneral Finishes Water Based Wood Stain\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch4\u003eToning\u003c\/h4\u003e\n\u003cp\u003eDye Stains can be used as a toner when mixed with water-based topcoat. A 10-20% stain to topcoat ratio is recommended for a slight color change.\u003c\/p\u003e\n\u003c!--\/.accordion-content--\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- End: Creative Finishing Techniques ------------------------------------------------------------\u003e \u003c!-- Storage of Water-Based Products ---------------------------------------------------\u003e\n\u003carticle\u003e\n\u003ch4\u003eStorage of Water-Based Products\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cp\u003ePlease be mindful of the manner in which water-based products are stored and how long they have been in storage. They are not a forever product.\u003c\/p\u003e\n\u003ch4\u003eLife of Product\u003c\/h4\u003e\n\u003cp\u003eWater-based products do not last forever, even when unopened. General Finishes products are best used within 1 year of the manufacture date listed on the can. However, the life of the product may be extended with proper care and storage (see Storage Tips below).\u003c\/p\u003e\n\u003cp\u003eWater-based products can last 3-5 years if the can is unopened, in good condition and stored in correct temperatures.\u003c\/p\u003e\n\u003cp\u003eProduct that is 3 years old will not look like product that is 6 months to 1 year old. You will see more stratification or separation as the product ages. Always stir thoroughly before using.\u003c\/p\u003e\n\u003ch4\u003eFoul Smell\u003c\/h4\u003e\n\u003cp\u003eIf your product has a foul smell, it is contaminated and no longer in useable condition.\u003c\/p\u003e\n\u003ch4\u003eClumps \u0026amp; Settling\u003c\/h4\u003e\n\u003cp\u003eGravity can cause some solids to settle on the bottom of the can and slight separation on the top. This is normal. If working with older product stir with a paint mixing attachment on a drill.\u003c\/p\u003e\n\u003cp\u003eIf the solids dissolve and clumps smooth out after mixing from the bottom, the product is in good condition for use.\u003c\/p\u003e\n\u003cp\u003eInability to reincorporate large, chunky lumps after stirring for several minutes is an indication that the product has frozen and can no longer be used.\u003c\/p\u003e\n\u003ch4\u003eStorage Tips\u003c\/h4\u003e\n\u003cp\u003eWater-based finishes crystalize and form a skin due to evaporation when the air-tight seal on a can is broken at first use. The following best practices will increase the life of your product:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ePry open sealed lids with a paint can opener by hooking under the lid's rolled edge. The use of a screwdriver can disfigure the rim and lid, impairing a complete seal.\u003c\/li\u003e\n\u003cli\u003eKeep lid closed while working. Pour what you will use into a bowl, paper cup, or plate, and close can lid as you work.\u003c\/li\u003e\n\u003cli\u003eClean the chime of the can thoroughly with a paper towel before closing to create a complete seal. Product falling into the chime can be minimized by using a pouring lid, such as Fitsall. Avoid wiping used brushes on the lid.\u003c\/li\u003e\n\u003cli\u003ePound the lid in place using a rubber mallet to avoid distorting the chime or lid. Dents in the lid from direct contact with a hammer can impair a complete seal. Alternatively, place a flat piece of wood over can lid and firmly pound shut.\u003c\/li\u003e\n\u003cli\u003eStore in moderate temperatures. Avoid temperatures below 50°F\/10°C or above 100°F\/26°C. Keep from freezing. Frozen and heat-damaged product cannot be revitalized. Temperature-controlled spaces, such as a basement, are ideal for storage. Do not store product in an attic, garage, in direct sunlight, or next to something warm like a water heater or furnace.\u003c\/li\u003e\n\u003cli\u003eStore can upside down to create a liquid seal, minimize evaporation and reduce the chance of crystallization. Decant remaining product from the can before stirring.\u003c\/li\u003e\n\u003cli\u003eDecant leftovers to a smaller container when the finish is almost used up. Alternative storage containers for water-based products are plastic FIFO bottles or glass bottles. Do not fill metal-lidded containers completely to prevent them from rusting.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eThe following water-based product mistures can be stored:\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eProduct thinned with up to 15% \u003ca href=\".\/water-based-extender-general-finishes-additives\"\u003eGeneral Finishes Extender\u003c\/a\u003e or \u003ca href=\".\/water-based-accelerator-general-finishes-additives\"\u003eGeneral Finishes Accelerator\u003c\/a\u003e, with the exception of thinned \u003ca href=\".\/water-based-wiping-stain-general-finishes\"\u003eGeneral Finishes Water Based Wood Stain\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eMixtures involving colors \u0026amp; sheens within the same product line, such as:\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Performance Satin + High Performance Gloss\u003c\/li\u003e\n\u003cli\u003eSnow White Milk Paint + Coastal Blue Milk Paint\u003c\/li\u003e\n\u003cli\u003eAmber Dye Stain + Merlot Dye Stain\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eThe following product mixtures should NOT be stored:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAny water based product with thinned tap water; water often contains bacteria that will adversely affect stored paint.\u003c\/li\u003e\n\u003cli\u003eTopcoat + Stain or Paint\u003c\/li\u003e\n\u003cli\u003eMilk Paint + Chalk Style Paint\u003c\/li\u003e\n\u003cli\u003eWater Based Wood Stain + Dye Stain\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!--\/.accordion-content--\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- End: Storage of Water-Based Products -----------------------------------------------\u003e \u003c!-- Supporting Videos ---------------------------------------------------\u003e\n\u003carticle\u003e\n\u003ch4\u003eSupporting Instructional Videos\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-4 col-md-6 text-center\"\u003e\n\u003cdiv class=\"video-wrapper\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/ZtQgfVA0uxo\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-lg-4 col-md-6 text-center\"\u003e\n\u003cdiv class=\"video-wrapper\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/OO4bCJFMrvs\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-lg-4 col-md-6 text-center\"\u003e\n\u003cdiv class=\"video-wrapper\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/fvo03tmO7YA\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!--\/.accordion-content--\u003e\n\u003c\/div\u003e\n\u003c!-- End: Supporting Videos -----------------------------------------------\u003e\n\u003c\/div\u003e\n\u003c!-- End Accordian: Instructions -----------------------------------------------\u003e\u003c\/article\u003e\n\u003c\/div\u003e","brand":"General Finishes","offers":[{"title":"Quart \/ Yellow","offer_id":8114247204983,"sku":"GF-DSYQ","price":28.0,"currency_code":"USD","in_stock":true},{"title":"Pint \/ Yellow","offer_id":8114247237751,"sku":"GF-DSYP","price":19.6,"currency_code":"USD","in_stock":false},{"title":"Gallon \/ Yellow","offer_id":8114247270519,"sku":"GF-DSYG","price":64.0,"currency_code":"USD","in_stock":true},{"title":"Quart \/ Vintage Cherry","offer_id":8114247303287,"sku":"GF-DSVCQ","price":28.0,"currency_code":"USD","in_stock":true},{"title":"Pint \/ Vintage Cherry","offer_id":8114247336055,"sku":"GF-DSVCP","price":19.6,"currency_code":"USD","in_stock":false},{"title":"Gallon \/ Vintage Cherry","offer_id":8114247368823,"sku":"GF-DSVCG","price":64.0,"currency_code":"USD","in_stock":true},{"title":"Quart \/ Pewter","offer_id":8114247499895,"sku":"GF-DSPWQ","price":28.0,"currency_code":"USD","in_stock":true},{"title":"Pint \/ Pewter","offer_id":8114247532663,"sku":"GF-DSPWP","price":19.6,"currency_code":"USD","in_stock":false},{"title":"Gallon \/ Pewter","offer_id":8114247565431,"sku":"GF-DSPWG","price":64.0,"currency_code":"USD","in_stock":true},{"title":"Quart \/ Orange","offer_id":8114247598199,"sku":"GF-DSOQ","price":28.0,"currency_code":"USD","in_stock":true},{"title":"Pint \/ Orange","offer_id":8114247630967,"sku":"GF-DSOP","price":19.6,"currency_code":"USD","in_stock":false},{"title":"Gallon \/ Orange","offer_id":8114247663735,"sku":"GF-DSOG","price":64.0,"currency_code":"USD","in_stock":true},{"title":"Quart \/ Merlot","offer_id":8114247696503,"sku":"GF-DSMLQ","price":28.0,"currency_code":"USD","in_stock":true},{"title":"Pint \/ Merlot","offer_id":8114247729271,"sku":"GF-DSMLP","price":19.6,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Merlot","offer_id":8114247762039,"sku":"GF-DSMLG","price":64.0,"currency_code":"USD","in_stock":true},{"title":"Quart \/ Medium Brown","offer_id":8114247794807,"sku":"GF-DSMBQ","price":28.0,"currency_code":"USD","in_stock":true},{"title":"Pint \/ Medium Brown","offer_id":8114247827575,"sku":"GF-DSMBP","price":19.6,"currency_code":"USD","in_stock":false},{"title":"Gallon \/ Medium Brown","offer_id":8114247860343,"sku":"GF-DSMBG","price":64.0,"currency_code":"USD","in_stock":true},{"title":"5 Gallon \/ Medium Brown","offer_id":8114247893111,"sku":"GF-DSMB5G","price":288.0,"currency_code":"USD","in_stock":true},{"title":"Quart \/ Light Brown","offer_id":8114247925879,"sku":"GF-DSLBQ","price":28.0,"currency_code":"USD","in_stock":true},{"title":"Pint \/ Light Brown","offer_id":8114247958647,"sku":"GF-DSLBP","price":19.6,"currency_code":"USD","in_stock":false},{"title":"Gallon \/ Light Brown","offer_id":8114247991415,"sku":"GF-DSLBG","price":64.0,"currency_code":"USD","in_stock":true},{"title":"5 Gallon \/ Light Brown","offer_id":8114248024183,"sku":"GF-DSLB5G","price":288.0,"currency_code":"USD","in_stock":true},{"title":"Quart \/ Green","offer_id":8114248056951,"sku":"GF-DSGRQ","price":28.0,"currency_code":"USD","in_stock":true},{"title":"Pint \/ Green","offer_id":8114248089719,"sku":"GF-DSGRP","price":19.6,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Green","offer_id":8114248122487,"sku":"GF-DSGRG","price":64.0,"currency_code":"USD","in_stock":true},{"title":"Quart \/ Empire Red","offer_id":8114248155255,"sku":"GF-DSERQ","price":28.0,"currency_code":"USD","in_stock":true},{"title":"Pint \/ Empire Red","offer_id":8114248188023,"sku":"GF-DSERP","price":19.6,"currency_code":"USD","in_stock":false},{"title":"Gallon \/ Empire Red","offer_id":8114248220791,"sku":"GF-DSERG","price":64.0,"currency_code":"USD","in_stock":true},{"title":"Quart \/ Ebony","offer_id":8114248253559,"sku":"GF-DSEBQ","price":28.0,"currency_code":"USD","in_stock":true},{"title":"Pint \/ Ebony","offer_id":8114248286327,"sku":"GF-DSEBP","price":19.6,"currency_code":"USD","in_stock":false},{"title":"Gallon \/ Ebony","offer_id":8114248319095,"sku":"GF-DSEBG","price":64.0,"currency_code":"USD","in_stock":true},{"title":"Quart \/ Dark Brown","offer_id":8114248351863,"sku":"GF-DSDBQ","price":28.0,"currency_code":"USD","in_stock":true},{"title":"Pint \/ Dark Brown","offer_id":8114248384631,"sku":"GF-DSDBP","price":19.6,"currency_code":"USD","in_stock":false},{"title":"Gallon \/ Dark Brown","offer_id":8114248417399,"sku":"GF-DSDBG","price":64.0,"currency_code":"USD","in_stock":true},{"title":"5 Gallon \/ Dark Brown","offer_id":8114248450167,"sku":"GF-DSDB5G","price":288.0,"currency_code":"USD","in_stock":true},{"title":"Quart \/ Cinnamon","offer_id":8114248482935,"sku":"GF-DSCNQ","price":28.0,"currency_code":"USD","in_stock":true},{"title":"Pint \/ Cinnamon","offer_id":8114248515703,"sku":"GF-DSCNP","price":19.6,"currency_code":"USD","in_stock":false},{"title":"Gallon \/ Cinnamon","offer_id":8114248548471,"sku":"GF-DSCNG","price":64.0,"currency_code":"USD","in_stock":true},{"title":"Quart \/ Blue","offer_id":8114248581239,"sku":"GF-DSBLQ","price":28.0,"currency_code":"USD","in_stock":true},{"title":"Pint \/ Blue","offer_id":8114248614007,"sku":"GF-DSBLP","price":19.6,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Blue","offer_id":8114248646775,"sku":"GF-DSBLG","price":64.0,"currency_code":"USD","in_stock":true},{"title":"Quart \/ Amber","offer_id":8114248679543,"sku":"GF-DSAMQ","price":28.0,"currency_code":"USD","in_stock":true},{"title":"Pint \/ Amber","offer_id":8114248712311,"sku":"GF-DSAMP","price":19.6,"currency_code":"USD","in_stock":false},{"title":"Gallon \/ Amber","offer_id":8114248745079,"sku":"GF-DSAMG","price":64.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/7892\/products\/dqy.png?v=1577706397"},{"product_id":"clear-water-based-conversion-varnish-top-coat-general-finishes","title":"General Finishes Clear Water Based Conversion Varnish Top Coat (Catalyst Included)","description":"\u003c!-- Start: Topcoat Description -----------------------------------------------\u003e\n\u003cp\u003eGeneral Finishes Conversion Varnish is a clear drying, two-component, post-catalyzed urethane topcoat for use when ultimate durability is necessary. Use this water-based varnish finish for high-use wood projects that receive a lot of wear, such as bars, commercial tabletops, bathroom vanities, around dishwashers, kitchen cupboards or high-moisture areas. One \u003ca href=\".\/nco-conversion-varnish-catalyst-general-finishes-additives\"\u003eNCO Catalyst\u003c\/a\u003e is included with a purchase of a gallon of Conversion Clear Coat Varnish.\u003c\/p\u003e\n\u003cp\u003ePlease click the below headers to reveal the instructional info for this product.\u003c\/p\u003e\n\u003c!-- Start Accordian: Instructions -----------------------------------------------\u003e\n\u003cdiv\u003e\n\u003c!-- Step 1: Preparation of Dye Stain -------------------------------------\u003e\n\u003carticle\u003e\n\u003ch4\u003eStep 1: Preparation of Conversion Varnish\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cp\u003eAll wood projects require preparation sanding, and all existing finishes require prep cleaning and sanding. If you skip this critical step, your finish may fail.\u003c\/p\u003e\n\u003ch4\u003ePreparation for Raw Wood or Raw Wood Projects That Are to be Stained\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eSanding Schedule: 120-grit followed by 150- or 220-grit sandpaper.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003cli\u003eLet dry completely before applying GF product.\u003c\/li\u003e\n\u003cli\u003eDo not over-sand with fine-grit sandpapers; this will close and seal the wood grain, preventing ideal color absorption.\u003c\/li\u003e\n\u003cli\u003eDo NOT use steel wool with water-based finishes; the particles will get trapped in the finish and rust.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003ePreparation for Projects with an Existing Finish (Sealed Surface)\u003c\/h4\u003e\n\u003cp\u003eFor high-use areas with heavy grime build-up and oil from hands, give your project a deeper cleaning.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eScuff clean with a Scotch Brite™ pad and a 50:50 mix of denatured alcohol and water. Dry 1-2 hours. Avoid cleaning with products containing phosphates (salt), which can linger in the substrate and produce a white haze. If your project requires a deeper cleaning, see Power Prep Cleaning Highly Used Existing Finishes below.\u003c\/li\u003e\n\u003cli\u003eSand lightly with a fine-grade (220-320) foam sanding pad.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003cli\u003eLet dry completely before applying General Finishes product.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003ePower Prep Cleaning Highly Used Existing Finishes\u003c\/h4\u003e\n\u003cp\u003eFor high-use areas such as kitchen cabinets or table tops with heavy grime build-up and oil from hands, give your project a \"Power\" clean.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eScrub clean with a detergent, such as Spic and Span or Dawn, using a Scotch Brite™ pad.\u003c\/li\u003e\n\u003cli\u003eRinse well with water.\u003c\/li\u003e\n\u003cli\u003eScrub clean with a Scotch Brite™ pad and a 50:50 mix of denatured alcohol and water. Dry 1-2 hours.\u003c\/li\u003e\n\u003cli\u003eSand lightly with a fine-grade (220-320) foam sanding pad.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003cli\u003eLet dry completely before applying General Finishes product.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eAlternative Cleaning Solutions For Existing Finishes (Not as aggressive or effective as denatured alcohol; requires rinsing.)\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e50:50 mix of bleach and water\u003c\/li\u003e\n\u003cli\u003e50:50 mix of vinegar and water\u003c\/li\u003e\n\u003cli\u003eMineral spirits can be used when working with water-based products, but only if the surface is thoroughly rinsed and allowed to dry for 72 hours.\u003c\/li\u003e\n\u003cli\u003eIf you use with products containing phosphates (salt), which can linger in the substrate and produce a white haze, be sure to rinse thoroughly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!--\/.accordion-content--\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- End: Accordian Step 1 -----------------------------------------------\u003e \u003c!-- Step 2: How To Apply General Finishes Dye Stain ------------------------------------------\u003e\n\u003carticle\u003e\n\u003ch4\u003eStep 2: How To Apply General Finishes Conversion Varnish\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cp\u003eGeneral Finishes Conversion Varnish is a clear drying, post-catalyzed, high-solids, two-component urethane formulated for ultimate durability and chemical resistance, and requires \u003ca href=\".\/nco-conversion-varnish-catalyst-general-finishes-additives\"\u003eGeneral Finishes NCO Catalyst\u003c\/a\u003e (one catalyst is included with a purchase of a gallon).\u003c\/p\u003e\n\u003cp\u003eCAUTION: Do NOT use GF Conversion Varnish or any other clear coat, over white or light paints such as \u003ca href=\".\/water-based-milk-paint-general-finishes-specialty-coatings\"\u003eGeneral Finishes Milk Paint\u003c\/a\u003e, or \u003ca href=\".\/white-water-based-poly-top-coat-general-finishes\"\u003eGeneral Finishes Enduro White Poly\u003c\/a\u003e as it may cause yellowing. Any clear coat can become reactive over wood substrates or existing finishes causing tannin, stain or dye bleed-through. All of GF's White Paints, brushable or spray versions, do NOT require a topcoat.\u003c\/p\u003e\n\u003ch4\u003eConversion Varnish Application Steps\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eStir thoroughly to reincorporate solids that have settled to the bottom of the can using a power drill and mixer (recommended) or by hand with a paint stick.\u003c\/li\u003e\n\u003cli\u003eSlowly add up to 10% \u003ca href=\".\/nco-conversion-varnish-catalyst-general-finishes-additives\"\u003eNCO Catalyst\u003c\/a\u003e by volume (3.2 oz. per quart; 12.8 oz. per gallon) to Conversion Varnish while stirring thoroughly. Allow 2-3 minutes when mixing with a power drill, or 5 minutes when mixing by hand with a paint stick. Use gloves and protective eyewear when mixing. Mix only what you are going to use and clean spray gun immediately after use. The finish can only be mixed once, and the leftover product will solidify after 6-8 hours. DO NOT store in a closed container to avoid pressure build-up.\u003c\/li\u003e\n\u003cli\u003eThin as desired, with distilled water (before or after mixing with \u003ca href=\".\/nco-conversion-varnish-catalyst-general-finishes-additives\"\u003eNCO Catalyst\u003c\/a\u003e); start with 5%, increase up to 10%.\u003c\/li\u003e\n\u003cli\u003eIncrease open time, if needed, with up to 5% by volume of \u003ca href=\".\/water-based-extender-general-finishes-additives\"\u003eGeneral Finishes Extender\u003c\/a\u003e if allowed by local regulations. GF Extender can be used to improve flow and leveling, and increase open time, which is helpful in dry climates. California Residents: Adding more than 2% of GF Extender will make the product non-compliant per SCAQMD Regulations. GF assumes no liability for the improper use of these products.\u003c\/li\u003e\n\u003cli\u003eLet Conversion Varnish sit for 15 minutes.\u003c\/li\u003e\n\u003cli\u003eApply 3 coats. For high-moisture areas, apply 4 coats. Additional coats will not improve durability.\n\u003cul\u003e\n\u003cli\u003eSpray application: Before spraying, strain topcoat through a fine-mesh filter. Spray wet films at 3-5-mil thickness. HVLP: 1.1mm-1.3mm spray tip, medium air cap. Verify tip sizes with your equipment supplier. \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0062\/7892\/files\/gf-hvlp-spray-tip-sizes.pdf?13835\"\u003eSee our general guide for spray tip sizes\u003c\/a\u003e. Keep your gun at a 90° angle, 6-8\" from the surface. On large, flat areas, use wet, even patterns 6-8\" wide. For narrow surfaces, reduce the fan pattern to 2-3\" wide to reduce overspray. Overlap each pass 25% to conceal lines. Wear a full filter respirator (NIOSH\/MSHA-approved) and work in a ventilated space.\u003c\/li\u003e\n\u003cli\u003eFace frames on cabinets: Enduro professional products are engineered to be spray-only but can be successfully applied by hand to cabinet face frames or edges with a pad applicator or small, cabinet-specific roller such as Whizz Velour brand. Larger areas may not level with a hand application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eIf a faster build is desired when applying clears over raw wood, use General Finishes Sanding Sealer for the first coat, followed by 2 coats of Enduro Conversion Varnish.\u003c\/li\u003e\n\u003cli\u003eDry 2+ hours between coats in ideal conditions: 70°F\/21°C; 50% humidity. Be sure to allow adequate dry time. You can tell if a water-based finish is dry if it forms a powder when lightly sanded with a fine-grade (220-320) foam sanding pad. If in doubt, wait longer. Rushing the dry time can cause \"blush,\" which is clouding in the finish due to moisture trapped between the layers. Increase dry time if:\n\u003cul\u003e\n\u003cli\u003eHumidity is over 80%\u003c\/li\u003e\n\u003cli\u003e3+ coats are applied\u003c\/li\u003e\n\u003cli\u003eThick coats are applied\u003c\/li\u003e\n\u003cli\u003eApplying over an existing sealed finish\u003c\/li\u003e\n\u003cli\u003eApplying over products from other brands\u003c\/li\u003e\n\u003cli\u003eLayering General Finishes water- and oil-based products:\n\u003cul\u003e\n\u003cli\u003eWater over oil: Let oil-based products dry 72+hr before applying water-based products\u003c\/li\u003e\n\u003cli\u003eOil over water: Let water-based products dry 24+hr before applying oil-based products\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eTo accelerate dry time in humid conditions, add \u003ca href=\".\/water-based-accelerator-general-finishes-additives\"\u003eGeneral Finishes Accelerator\u003c\/a\u003e and work in a space with good ventilation and air movement. If you decide to re-coat before the recommended time, test dryness.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eFinish sand between coats with a fine-grade (220-320) foam sanding pad to improve smoothness and adhesion.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eToning\u003c\/h4\u003e\n\u003cp\u003eConversion Varnish cannot be used as a toner.\u003c\/p\u003e\n\u003ch4\u003eCure Time\u003c\/h4\u003e\n\u003cp\u003eWater-based finishes cure and harden for full use after 21 days in ideal conditions. Avoid placing heavy objects on surfaces that have not completely cured. Treat gently, and do not clean with commercial products during the curing period.\u003c\/p\u003e\n\u003cp\u003eWarning: Do not use water-based products with Linseed Oils or Danish Oils.\u003c\/p\u003e\n\u003c!--\/.accordion-content--\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- End: Accordian Step 2 -----------------------------------------------\u003e \u003c!-- Yellowing \u0026 Clear Topcoat ---------------------------------------------------\u003e\n\u003carticle\u003e\n\u003ch4\u003eYellowing \u0026amp; Clear Topcoat\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cp\u003eAs is true of most \"water-white\" topcoats, General Finishes water-based topcoats dry clear over non-reactive substrates, such as plastic or metal, except \u003ca href=\".\/clear-enduro-var-water-based-top-coat-general-finishes\"\u003eGeneral Finishes Enduro-Var\u003c\/a\u003e, which ambers. When white paint sealed with a water-white topcoat is applied to something as unpredictable as wood, all bets are off and the reason for yellowing is often unknown. It can be caused by topcoat activating tannins in raw wood or aniline dyes, stains, or contaminants in a pre-existing finish. This is most evident when using BRIGHT WHITE paint and most prevalent in sculpted details of furniture where the topcoat can collect, intensifying color change to an unacceptable level.\u003c\/p\u003e\n\u003cp\u003eThere is no reliable way to predict whether yellowing will occur and to what degree. Every existing finish is different and we rarely know the finishing provenance on an existing piece. Every tree is different and every piece of wood is unique. Raw wood can bleed tannins immediately after the topcoat dries or months later with seasonal temperature changes. Oak, pine, mahogany, and douglas fir are particularly prone to bleed-through.\u003c\/p\u003e\n\u003ch4\u003eSummary\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eWhites have a lower “hide” quality and are more transparent than most other colors. Nearly all bright whites require additional coats to achieve the desired color and minimize color variation. This can increase the cost of paint finishing. Always include a clause in your contracts addressing the need for additional coats to achieve coverage.\u003c\/li\u003e\n\u003cli\u003eAll bright white paint will yellow slightly with time, with or without topcoat. You have probably tried to touch up white woodwork in your home after several years and noticed the new paint is brighter.\u003c\/li\u003e\n\u003cli\u003eThe underlying finish or wood species can affect the final color of light paint.\u003c\/li\u003e\n\u003cli\u003eDetails and inside corners are difficult to cover with any paint color, but it tends to be more noticeable with whites. This is a naturally occurring phenomenon in paint application and does not necessarily constitute a defect in the paint finish or your technique.\u003c\/li\u003e\n\u003cli\u003eThe more porous the paint, such as a chalk paint, the more likely that yellowing will occur. The topcoat is seeping through the spaces caused by the larger particles of filler that give Chalk Paints their texture.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTips to Prevent Yellowing\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eIf it is a low-use project, use a premium white paint that is self-sealing and does not require a topcoat. A clear topcoat is not required on \u003ca href=\".\/water-based-milk-paint-general-finishes-specialty-coatings\"\u003eGeneral Finishes Milk Paint\u003c\/a\u003e for increased durability, as it is a self-sealing, exterior-rated coating with high durability and chemical and water resistance. However, topcoats do provide a smooth surface that is easier to clean and boosts durability for high-use projects, such as tabletops and kitchen cabinets.\u003c\/li\u003e\n\u003cli\u003eUse a professional spray such as \u003ca href=\".\/white-water-based-poly-top-coat-general-finishes\"\u003eGeneral Finishes Enduro White Poly\u003c\/a\u003e. It has \"increased topcoat properties,\" is a standalone finish when 3 coats are applied, and does not require sealing with a topcoat.\u003c\/li\u003e\n\u003cli\u003eWe recommend using \u003ca href=\".\/stain-blocker-water-based-primer-general-finishes\"\u003eGeneral Finishes Stain Blocker\u003c\/a\u003e, an engineered chemical barrier, to prevent persistent bleed-through for interior-use projects.\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\".\/stain-blocker-water-based-primer-general-finishes\"\u003eStain Blocker\u003c\/a\u003er does not adhere to melamine cabinet veneers.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\".\/stain-blocker-water-based-primer-general-finishes\"\u003eStain Blocker\u003c\/a\u003e cannot be tinted.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eAlways test your project's ENTIRE finishing schedule (from cleaning to topcoat) on an inside door or a more hidden area of the piece. This will not help if the yellowing occurs later, but at least you will know if there is an immediate problem.\u003c\/li\u003e\n\u003cli\u003eAvoid painting period furniture, such as a 1940s serpentine mahogany desk, with light colors. The pieces were often finished in stain that contained aniline dyes, which cast a pinkish bleed-through under light paint. Not every piece of furniture is suitable for upcycling with a light paint color. Pine, mahogany, and furniture of the 1940s and 50s are a red flag.\u003c\/li\u003e\n\u003cli\u003eLast, not all manufacturers' topcoats are compatible with other finishes and may react with a color change. Always follow best practices by not rushing, and testing to your satisfaction first.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eKnots\u003c\/h4\u003e\n\u003cp\u003eKnots in wood tend to bleed and are dense, making paint and stain adhesion a challenge. \u003ca href=\".\/stain-blocker-water-based-primer-general-finishes\"\u003eStain Blocker\u003c\/a\u003e may improve adhesion and prevent bleed-through for painting projects. Pine knots are especially difficult to cover with white or light paints. If you decide to paint over them, apply 3 coats of Stain Blocker first; however, we cannot guarantee adhesion or bleed-through blockage. You are better off using a dark paint on pine.\u003c\/p\u003e\n\u003c!--\/.accordion-content--\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- End: Yellowing \u0026 Clear Topcoat -----------------------------------------------\u003e \u003c!-- Storage of Conversion Varnish ---------------------------------------------------\u003e\n\u003carticle\u003e\n\u003ch4\u003eStorage of General Finishes Conversion Varnish\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003ch4\u003eLife of Product\u003c\/h4\u003e\n\u003cp\u003eWater-based products do not last forever, even when unopened. General Finishes products are best used within 1 year of the manufacture date listed on the bottom of the can. The life of the product may be extended with proper care and storage.\u003c\/p\u003e\n\u003ch4\u003eSettling\u003c\/h4\u003e\n\u003cp\u003eGravity can cause some solids to settle on the bottom of the can and slight separation on the top. This is normal. If working with older Conversion, use paint mixing attachment on a drill. If the solids dissolve and clumps smooth out after mixing from the bottom, the product is in good condition for use.\u003c\/p\u003e\n\u003ch4\u003eStorage Tips\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eThe finish can only be mixed once, and the leftover product will solidify after 6-8 hours.\u003c\/li\u003e\n\u003cli\u003eDO NOT store in a closed container to avoid pressure build-up.\u003c\/li\u003e\n\u003cli\u003eStore in moderate temperatures. Avoid temperatures below 50°F\/10°C or above 100°F\/26°C. Frozen and heat-damaged product cannot be revitalized. Temperature-controlled spaces, such as a basement, are ideal for storage. Do not store product in an attic, garage, in direct sunlight, or next to something warm like a water heater or furnace.\u003c\/li\u003e\n\u003cli\u003eStore can upside down to create a liquid seal, minimize evaporation and reduce the chance of crystallization.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c!--\/.accordion-content--\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- End: Storage of Conversion Varnish -----------------------------------------------\u003e \u003c!-- Furniture Care and Maintenance ---------------------------------------------------\u003e\n\u003carticle\u003e\n\u003ch4\u003eFurniture Care \u0026amp; Maintenance\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003ch4\u003eCure First\u003c\/h4\u003e\n\u003cp\u003eYou have just finished applying a fine furniture finish. Treat gently until the paint or topcoat have fully cured. Allow 21 days for a water-based finish to cure and 30 days for an oil-based finish to cure before cleaning.\u003c\/p\u003e\n\u003ch4\u003eRegular Cleaning and Maintenance\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eRemove dust with a water-dampened cloth. Dust can build up over time and may scratch or dull finishes if not removed regularly.\u003c\/li\u003e\n\u003cli\u003eRemove fingerprints, cooking fumes and smoking residue with mild soap and water. These contaminants will not harm the finish, but they accumulate on surfaces and dull the original luster.\u003c\/li\u003e\n\u003cli\u003eAs with all fine furniture finishes, avoid using furniture polish, cleaners or dusting sprays that contain silicone, alcohol, ammonia and anything acidic. Exception: We have successfully cleaned with Clorox wipes.\u003c\/li\u003e\n\u003cli\u003eClean up water, alcohol and food spills in a timely manner and use placemats \u0026amp; coasters to protect the finish.\u003c\/li\u003e\n\u003cli\u003eFuture finishes or touch-ups may not adhere properly or perform as desired over a contaminated surface. Some contaminants, such as silicone, seep through finish into the wood and often cannot be removed.\u003c\/li\u003e\n\u003cli\u003eAvoid excessive exposure to direct sunlight, high temperatures or high humidity. These can damage furniture and finishes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!--\/.accordion-content--\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- End: Furniture Care and Maintenance -----------------------------------------------\u003e\n\u003c\/div\u003e\n\u003c!-- End Accordian: Instructions -----------------------------------------------\u003e","brand":"General Finishes","offers":[{"title":"Gallon \/ Flat","offer_id":8114248974455,"sku":"GF-CVFG","price":195.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Satin","offer_id":8114248843383,"sku":"GF-CVSG","price":195.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Semi-Gloss","offer_id":8114248777847,"sku":"GF-CVSGG","price":195.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Gloss","offer_id":8114248908919,"sku":"GF-CVGG","price":195.0,"currency_code":"USD","in_stock":true},{"title":"5 Gallon \/ Flat","offer_id":8114249007223,"sku":"GF-CVF5G","price":830.0,"currency_code":"USD","in_stock":true},{"title":"5 Gallon \/ Satin","offer_id":8114248876151,"sku":"GF-CVS5G","price":830.0,"currency_code":"USD","in_stock":true},{"title":"5 Gallon \/ Semi-Gloss","offer_id":8114248810615,"sku":"GF-CVSG5G","price":830.0,"currency_code":"USD","in_stock":true},{"title":"5 Gallon \/ Gloss","offer_id":8114248941687,"sku":"GF-CVG5G","price":830.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/7892\/files\/gf-product-render-WATER-BASED-TOPCOAT-ENDURO-CONVERSION-VARNISH-flat-GALLON-CLOSED-v2-thick-banding-1000PX-general-finishes-2023.jpg?v=1730311772"},{"product_id":"clear-water-based-poly-top-coat-general-finishes","title":"General Finishes Clear Water Based Poly Top Coat","description":"\u003c!-- Start: Topcoat Description -----------------------------------------------\u003e\n\u003cp\u003eEnduro Clear Poly is a high-performing commercial-grade water-based topcoat fortified\n  with polyurethane that delivers a clear, tough, durable and abrasion-resistant finish.\n  It does not require a topcoat. Clear Poly can be used on any project where more\n  solids (28%) and durability are desired.\u003c\/p\u003e\n\u003cp\u003ePlease click the below headers to reveal the instructional info for this product.\u003c\/p\u003e\n\u003c!-- Start Accordian: Instructions -----------------------------------------------\u003e\n\u003cdiv\u003e\n    \u003c!-- Step 1: Preparation of Clear Poly ---------------------------------------------------\u003e\n    \u003carticle\u003e\n  \n      \u003ch4\u003eStep 1: Preparation for Clear Poly\u003c\/h4\u003e\n      \u003cdiv\u003e\n        \u003cp\u003eAll wood projects require preparation sanding, and all existing finishes\n          require prep cleaning and sanding. If you skip this critical step, your\n          finish may fail.\u003c\/p\u003e\n        \u003ch4\u003ePreparation for Raw Wood or Raw Wood Projects That Are to be Stained\u003c\/h4\u003e\n        \u003col\u003e\n          \u003cli\u003eSanding Schedule: 120-grit followed by 150- or 220-grit sandpaper.\u003c\/li\u003e\n          \u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or\n            a water-dampened rag.\u003c\/li\u003e\n          \u003cli\u003eLet dry completely before applying GF product.\u003c\/li\u003e\n          \u003cli\u003eDo not over-sand with fine-grit sandpapers; this will close and seal\n            the wood grain, preventing ideal color absorption.\u003c\/li\u003e\n          \u003cli\u003eDo NOT use steel wool with water-based finishes; the particles will\n            get trapped in the finish and rust.\u003c\/li\u003e\n        \u003c\/ol\u003e\n        \u003ch4\u003ePreparation for Projects with an Existing Finish (Sealed Surface)\u003c\/h4\u003e\n        \u003cp\u003eFor high-use areas with heavy grime build-up and oil from hands, give\n          your project a deeper cleaning.\u003c\/p\u003e\n        \u003col\u003e\n          \u003cli\u003eScuff clean with a Scotch Brite™ pad and a 50:50 mix of denatured\n            alcohol and water. Dry 1-2 hours. Avoid cleaning with products containing\n            phosphates (salt), which can linger in the substrate and produce a\n            white haze. If your project requires a deeper cleaning, see Power Prep\n            Cleaning Highly Used Existing Finishes below.\u003c\/li\u003e\n          \u003cli\u003eSand lightly with a fine-grade (220-320) foam sanding pad.\u003c\/li\u003e\n          \u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth\n            or a water-dampened rag.\u003c\/li\u003e\n          \u003cli\u003eLet dry completely before applying General Finishes product.\u003c\/li\u003e\n        \u003c\/ol\u003e\n        \u003ch4\u003ePower Prep Cleaning Highly Used Existing Finishes\u003c\/h4\u003e\n        \u003cp\u003eFor high-use areas such as kitchen cabinets or table tops with heavy\n          grime build-up and oil from hands, give your project a \"Power\" clean.\u003c\/p\u003e\n        \u003col\u003e\n          \u003cli\u003eScrub clean with a detergent, such as Spic and Span or Dawn, using\n            a Scotch Brite™ pad.\u003c\/li\u003e\n          \u003cli\u003eRinse well with water.\u003c\/li\u003e\n          \u003cli\u003eScrub clean with a Scotch Brite™ pad and a 50:50 mix of denatured\n            alcohol and water. Dry 1-2 hours.\u003c\/li\u003e\n          \u003cli\u003eSand lightly with a fine-grade (220-320) foam sanding pad.\u003c\/li\u003e\n          \u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth\n            or a water-dampened rag.\u003c\/li\u003e\n          \u003cli\u003eLet dry completely before applying General Finishes product.\u003c\/li\u003e\n        \u003c\/ol\u003e\n        \u003ch4\u003eAlternative Cleaning Solutions For Existing Finishes (Not as aggressive\n          or effective as denatured alcohol; requires rinsing.)\u003c\/h4\u003e\n        \u003cul\u003e\n          \u003cli\u003e50:50 mix of bleach and water\u003c\/li\u003e\n          \u003cli\u003e50:50 mix of vinegar and water\u003c\/li\u003e\n          \u003cli\u003eMineral spirits can be used when working with water-based products,\n            but only if the surface is thoroughly rinsed and allowed to dry for\n            72 hours.\u003c\/li\u003e\n          \u003cli\u003eIf you use with products containing phosphates (salt), which can\n            linger in the substrate and produce a white haze, be sure to rinse\n            thoroughly.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003c!--\/.accordion-content--\u003e\n      \u003c\/div\u003e\n    \u003c\/article\u003e\n    \u003c!-- End: Accordian Step 1 -----------------------------------------------\u003e\n  \n    \u003c!-- Step 2: How to Apply Clear Poly ------------------------------------------\u003e\n    \u003carticle\u003e\n    \u003ch4\u003eStep 2: How to Apply General Finishes Clear Poly\u003c\/h4\u003e\n    \u003cdiv\u003e\n      \u003cp\u003eCAUTION: Do NOT use GF Clear Poly or any other clear coat, over white\n        or light paints such as \u003ca href=\".\/water-based-milk-paint-general-finishes-specialty-coatings\"\u003eGeneral Finishes Milk Paint\u003c\/a\u003e,\n        or \u003ca href=\".\/white-water-based-poly-top-coat-general-finishes\"\u003eGeneral Finishes Enduro White Poly\u003c\/a\u003e\n        as it may cause yellowing. Any clear coat can become reactive over wood\n        substrates or existing finishes, causing tannin or dye bleed-though regardless\n        of priming. All of GF's white paints are self-sealing and do NOT require a\n        topcoat.\u003c\/p\u003e\n      \u003ch4\u003eGeneral Finishes Clear Poly Application Steps\u003c\/h4\u003e\n      \u003col\u003e\n        \u003cli\u003eStir to reincorporate solids that have settled to the bottom of the can\n          before and throughout the application process.\u003c\/li\u003e\n        \u003cli\u003eThin as desired with distilled water; start with 5%, increase up to 10%\n          by volume. Increase open time, if needed, with up to 5% \u003ca href=\".\/water-based-extender-general-finishes-additives\"\u003eGeneral Finishes Extender\u003c\/a\u003e\n          if allowed by local regulations. GF Extender will improve flow and leveling\n          and increase open time, which is helpful in dry climates. California\n          Residents: Adding more than 2% of GF Extender will make the products\n          non-compliant per SCAQMD Regulations. GF assumes no liability for the\n          improper use of these products.\u003c\/li\u003e\n        \u003cli\u003eApply 3 coats of Clear Poly. More coats will not improve durability.\n          \u003cul\u003e\n            \u003cli\u003eSpray Application: Before spraying, strain topcoat through a fine-mesh\n              filter. Spray wet films at 3-5-mil thickness. HVLP: 1.1mm-1.3mm spray tip,\n              medium air cap. Verify tip sizes with your equipment supplier.\n              \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0062\/7892\/files\/gf-hvlp-spray-tip-sizes.pdf?13835\"\u003eSee our general guide for spray tip sizes\u003c\/a\u003e.\n              Keep your gun at a 90° angle, 6-8\" from the surface. On large, flat\n              areas, use wet, even patterns 6-8\" wide. For narrow surfaces, reduce\n              the fan pattern to 2-3\" wide to reduce overspray. Overlap each pass\n              25% to conceal lines. Wear a full filter respirator (NIOSH\/MSHA approved)\n              and work in a ventilated space. \u003c\/li\u003e\n            \u003cli\u003eFace frames and drawers on cabinets: Enduro professional products are engineered to be spray-only but can be\n              successfully applied by hand to cabinet face frames or edges with a\n              brush, pad or small, cabinet-specific roller such as Whizz or AllPro\n              Velour brand. Larger areas may not level with a hand application.\n              ALTERNATIVE: Use the same sheen of \u003ca href=\".\/water-based-clear-high-performance-poly-top-coat-general-finishes\"\u003eGeneral Finishes High Performance Topcoat\u003c\/a\u003e\n              on areas that must be brushed. \u003c\/li\u003e\n          \u003c\/ul\u003e\n        \u003c\/li\u003e\n        \u003cli\u003eIf a faster build is desired over raw wood, use \u003ca href=\".\/water-based-sanding-sealer-general-finishes\"\u003eGeneral Finishes Sanding Sealer\u003c\/a\u003e\n          for the 1-2 coats, followed by 2 coats of Clear Poly.\u003c\/li\u003e\n        \u003cli\u003eDry 2+ hours between coats in ideal conditions: 70°F 20°C; 50% humidity.\n          Be sure to allow adequate dry time. You can tell if a water-based finish\n          is dry if it forms a powder when lightly sanded with a fine-grade (220-320)\n          foam sanding pad. If in doubt, wait longer. Rushing the dry time can cause \"blush\",\n          which is clouding in the finish due to moisture trapped between the layers.\n          Increase dry time if:\n          \u003cul\u003e\n            \u003cli\u003eHumidity is over 80%\u003c\/li\u003e\n            \u003cli\u003e3+ coats are applied\u003c\/li\u003e\n            \u003cli\u003eThick coats are applied\u003c\/li\u003e\n            \u003cli\u003eApplying over an existing sealed finish\u003c\/li\u003e\n            \u003cli\u003eApplying over products from other brands\u003c\/li\u003e\n            \u003cli\u003eLayering General Finishes water- and oil-based products:\u003c\/li\u003e\n            \u003cul\u003e\n              \u003cli\u003eWater over oil: Let oil-based products dry 72+hr before applying\n                water-based products\u003c\/li\u003e\n              \u003cli\u003eOil over water: Let water-based products dry 24+hr before applying\n                oil-based products\u003c\/li\u003e\n            \u003c\/ul\u003e\n            \u003cli\u003eTo accelerate dry time in humid conditions, add \u003ca href=\".\/water-based-accelerator-general-finishes-additives\"\u003eGeneral Finishes Accelerator\u003c\/a\u003e\n              and work in a space with good ventilation and air movement. If you\n              decide to re-coat before the recommended time, test dryness.\u003c\/li\u003e\n          \u003c\/ul\u003e\n        \u003c\/li\u003e\n        \u003cli\u003eFinish sand between coats with a fine-grade (220-320) foam sanding pad to improve smoothness and adhesion.\u003c\/li\u003e\n        \u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n      \u003c\/ol\u003e\n      \u003ch4\u003eCure Time\u003c\/h4\u003e\n      \u003cp\u003eWater-based finishes cure and harden for full use after 21 days in ideal\n        conditions. Avoid placing heavy objects on surfaces that have not completely\n        cured. Treat gently, and do not clean with commercial products during the\n        curing period.\u003c\/p\u003e\n      \u003cp\u003eWarning: Do not use water-based products with Linseed Oils or Danish Oils.\u003c\/p\u003e\n      \u003c!--\/.accordion-content--\u003e\n    \u003c\/div\u003e\n  \u003c\/article\u003e\n  \u003c!-- End: Accordian Step 2 -----------------------------------------------\u003e\n  \n  \u003c!-- Yellowing \u0026 Clear Topcoat ---------------------------------------------------\u003e\n  \u003carticle\u003e\n  \n    \u003ch4\u003eYellowing \u0026amp; Clear Topcoat\u003c\/h4\u003e\n    \u003cdiv\u003e\n      \u003cp\u003eAs is true of most \"water-white\" topcoats, General Finishes water-based\n        topcoats dry clear over non-reactive substrates, such as plastic or metal,\n        except \u003ca href=\".\/clear-enduro-var-water-based-top-coat-general-finishes\"\u003eGeneral Finishes Enduro-Var\u003c\/a\u003e, which ambers. When white paint sealed\n        with a water-white topcoat is applied to something as unpredictable as wood,\n        all bets are off and the reason for yellowing is often unknown. It can be\n        caused by topcoat activating tannins in raw wood or aniline dyes, stains,\n        or contaminants in a pre-existing finish. This is most evident when using\n        BRIGHT WHITE paint and most prevalent in sculpted details of furniture\n        where the topcoat can collect, intensifying color change to an unacceptable\n        level.\u003c\/p\u003e\n      \u003cp\u003eThere is no reliable way to predict whether yellowing will occur and to\n        what degree. Every existing finish is different and we rarely know the\n        finishing provenance on an existing piece. Every tree is different and\n        every piece of wood is unique. Raw wood can bleed tannins immediately\n        after the topcoat dries or months later with seasonal temperature changes.\n        Oak, pine, mahogany, and douglas fir are particularly prone to bleed-through.\u003c\/p\u003e\n      \u003ch4\u003eSummary\u003c\/h4\u003e\n      \u003cul\u003e\n        \u003cli\u003eWhites have a lower “hide” quality and are more transparent than most\n          other colors. Nearly all bright whites require additional coats to achieve\n          the desired color and minimize color variation. This can increase the\n          cost of paint finishing. Always include a clause in your contracts\n          addressing the need for additional coats to achieve coverage.\u003c\/li\u003e\n        \u003cli\u003eAll bright white paint will yellow slightly with time, with or without\n          topcoat. You have probably tried to touch up white woodwork in your home\n          after several years and noticed the new paint is brighter.\u003c\/li\u003e\n        \u003cli\u003eThe underlying finish or wood species can affect the final color of\n          light paint.\u003c\/li\u003e\n        \u003cli\u003eDetails and inside corners are difficult to cover with any paint color,\n          but it tends to be more noticeable with whites. This is a naturally\n          occurring phenomenon in paint application and does not necessarily\n          constitute a defect in the paint finish or your technique.\u003c\/li\u003e\n        \u003cli\u003eThe more porous the paint, such as a chalk paint, the more likely\n          that yellowing will occur. The topcoat is seeping through the spaces\n          caused by the larger particles of filler that give Chalk Paints their\n          texture.\u003c\/li\u003e\n      \u003c\/ul\u003e\n      \u003ch4\u003eTips to Prevent Yellowing\u003c\/h4\u003e\n      \u003cul\u003e\n        \u003cli\u003eIf it is a low-use project, use a premium white paint that is self-sealing\n          and does not require a topcoat. A clear topcoat is not required on\n          \u003ca href=\".\/water-based-milk-paint-general-finishes-specialty-coatings\"\u003eGeneral Finishes Milk Paint\u003c\/a\u003e\n          for increased durability, as it is a self-sealing, exterior-rated coating\n          with high durability and chemical and water resistance. However, topcoats\n          do provide a smooth surface that is easier to clean and boosts durability\n          for high-use projects, such as tabletops and kitchen cabinets.\u003c\/li\u003e\n        \u003cli\u003eUse a professional spray such as\n          \u003ca href=\".\/white-water-based-poly-top-coat-general-finishes\"\u003eGeneral Finishes Enduro White Poly\u003c\/a\u003e.\n          It has \"increased topcoat properties,\" is a standalone finish when 3 coats\n          are applied, and does not require sealing with a topcoat.\u003c\/li\u003e\n        \u003cli\u003eWe recommend using \u003ca href=\".\/stain-blocker-water-based-primer-general-finishes\"\u003eGeneral Finishes Stain Blocker\u003c\/a\u003e,\n          an engineered chemical barrier, to prevent persistent bleed-through for interior-use projects.\u003c\/li\u003e\n        \u003cul\u003e\n          \u003cli\u003e\n  \u003ca href=\".\/stain-blocker-water-based-primer-general-finishes\"\u003eStain Blocker\u003c\/a\u003er does not adhere to melamine cabinet veneers.\u003c\/li\u003e\n          \u003cli\u003e\n  \u003ca href=\".\/stain-blocker-water-based-primer-general-finishes\"\u003eStain Blocker\u003c\/a\u003e cannot be tinted.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cli\u003eAlways test your project's ENTIRE finishing schedule (from cleaning to topcoat)\n          on an inside door or a more hidden area of the piece. This will not help if the\n          yellowing occurs later, but at least you will know if there is an immediate problem.\u003c\/li\u003e\n        \u003cli\u003eAvoid painting period furniture, such as a 1940s serpentine mahogany desk,\n          with light colors. The pieces were often finished in stain that contained\n          aniline dyes, which cast a pinkish bleed-through under light paint. Not\n          every piece of furniture is suitable for upcycling with a light paint color.\n          Pine, mahogany, and furniture of the 1940s and 50s are a red flag.\u003c\/li\u003e\n        \u003cli\u003eLast, not all manufacturers' topcoats are compatible with other finishes\n          and may react with a color change. Always follow best practices by not\n          rushing, and testing to your satisfaction first.\u003c\/li\u003e\n      \u003c\/ul\u003e\n      \u003ch4\u003eKnots\u003c\/h4\u003e\n      \u003cp\u003eKnots in wood tend to bleed and are dense, making paint and stain adhesion a challenge.\n        \u003ca href=\".\/stain-blocker-water-based-primer-general-finishes\"\u003eStain Blocker\u003c\/a\u003e\n        may improve adhesion and prevent bleed-through for painting projects.\n        Pine knots are especially difficult to cover with white or light paints.\n        If you decide to paint over them, apply 3 coats of Stain Blocker first;\n        however, we cannot guarantee adhesion or bleed-through blockage. You are\n        better off using a dark paint on pine.\u003c\/p\u003e\n      \u003c!--\/.accordion-content--\u003e\n    \u003c\/div\u003e\n  \u003c\/article\u003e\n  \u003c!-- End: Yellowing \u0026 Clear Topcoat -----------------------------------------------\u003e\n  \n  \u003c!-- Storage of Water-Based Products ---------------------------------------------------\u003e\n  \u003carticle\u003e\n  \n    \u003ch4\u003eStorage of Water-Based Products\u003c\/h4\u003e\n    \u003cdiv\u003e\n      \u003cp\u003ePlease be mindful of the manner in which water-based products are stored\n        and how long they have been in storage. They are not a forever product.\u003c\/p\u003e\n      \u003ch4\u003eLife of Product\u003c\/h4\u003e\n      \u003cp\u003eWater-based products do not last forever, even when unopened. General Finishes\n        products are best used within 1 year of the manufacture date listed on the can.\n        However, the life of the product may be extended with proper care and storage (see Storage Tips below).\u003c\/p\u003e\n      \u003cp\u003eWater-based products can last 3-5 years if the can is unopened, in good\n        condition and stored in correct temperatures.\u003c\/p\u003e\n      \u003cp\u003eProduct that is 3 years old will not look like product that is 6 months\n         to 1 year old. You will see more stratification or separation as the product\n         ages. Always stir thoroughly before using. \u003c\/p\u003e\n      \u003ch4\u003eFoul Smell\u003c\/h4\u003e\n      \u003cp\u003eIf your product has a foul smell, it is contaminated and no longer in\n        useable condition.\u003c\/p\u003e\n      \u003ch4\u003eClumps \u0026amp; Settling\u003c\/h4\u003e\n      \u003cp\u003eGravity can cause some solids to settle on the bottom of the can and slight\n        separation on the top. This is normal. If working with older product stir\n        with a paint mixing attachment on a drill.\u003c\/p\u003e\n      \u003cp\u003eIf the solids dissolve and clumps smooth out after mixing from the bottom,\n        the product is in good condition for use.\u003c\/p\u003e\n      \u003cp\u003eInability to reincorporate large, chunky lumps after stirring for several\n        minutes is an indication that the product has frozen and can no longer be used.\u003c\/p\u003e\n      \u003ch4\u003eStorage Tips\u003c\/h4\u003e\n      \u003cp\u003eWater-based finishes crystalize and form a skin due to evaporation when\n        the air-tight seal on a can is broken at first use. The following best\n        practices will increase the life of your product:\u003c\/p\u003e\n      \u003col\u003e\n        \u003cli\u003ePry open sealed lids with a paint can opener by hooking under the lid's\n          rolled edge. The use of a screwdriver can disfigure the rim and lid,\n          impairing a complete seal. \u003c\/li\u003e\n        \u003cli\u003eKeep lid closed while working. Pour what you will use into a bowl, paper\n          cup, or plate, and close can lid as you work.\u003c\/li\u003e\n        \u003cli\u003eClean the chime of the can thoroughly with a paper towel before closing\n          to create a complete seal. Product falling into the chime can be minimized\n          by using a pouring lid, such as Fitsall. Avoid wiping used brushes on the lid.\u003c\/li\u003e\n        \u003cli\u003ePound the lid in place using a rubber mallet to avoid distorting the\n          chime or lid. Dents in the lid from direct contact with a hammer can impair\n          a complete seal. Alternatively, place a flat piece of wood over can lid\n          and firmly pound shut.\u003c\/li\u003e\n        \u003cli\u003eStore in moderate temperatures. Avoid temperatures below 50°F\/10°C or\n          above 100°F\/26°C. Keep from freezing. Frozen and heat-damaged product\n          cannot be revitalized. Temperature-controlled spaces, such as a basement,\n          are ideal for storage. Do not store product in an attic, garage, in\n          direct sunlight, or next to something warm like a water heater or furnace.\u003c\/li\u003e\n        \u003cli\u003eStore can upside down to create a liquid seal, minimize evaporation and\n          reduce the chance of crystallization. Decant remaining product from the\n          can before stirring. \u003c\/li\u003e\n        \u003cli\u003eDecant leftovers to a smaller container when the finish is almost used\n          up. Alternative storage containers for water-based products are plastic\n          FIFO bottles or glass bottles. Do not fill metal-lidded containers\n          completely to prevent them from rusting.\u003c\/li\u003e\n      \u003c\/ol\u003e\n      \u003ch4\u003eThe following water-based product mistures can be stored:\u003c\/h4\u003e\n      \u003col\u003e\n        \u003cli\u003eProduct thinned with up to 15%\n          \u003ca href=\".\/water-based-extender-general-finishes-additives\"\u003eGeneral Finishes Extender\u003c\/a\u003e\n          or \u003ca href=\".\/water-based-accelerator-general-finishes-additives\"\u003eGeneral Finishes\n            Accelerator\u003c\/a\u003e, with the exception of thinned \u003ca href=\".\/water-based-wiping-stain-general-finishes\"\u003eGeneral Finishes\n              Water Based Wood Stain\u003c\/a\u003e.\u003c\/li\u003e\n        \u003cli\u003eMixtures involving colors \u0026amp; sheens within the same product line, such as:\u003c\/li\u003e\n        \u003c\/ol\u003e\n  \u003cul\u003e\n          \u003cli\u003eHigh Performance Satin + High Performance Gloss\u003c\/li\u003e\n          \u003cli\u003eSnow White Milk Paint + Coastal Blue Milk Paint\u003c\/li\u003e\n          \u003cli\u003eAmber Dye Stain + Merlot Dye Stain\u003c\/li\u003e\n        \u003c\/ul\u003e\n      \n      \u003ch4\u003eThe following product mixtures should NOT be stored:\u003c\/h4\u003e\n      \u003cul\u003e\n        \u003cli\u003eAny water based product with thinned tap water; water often contains\n          bacteria that will adversely affect stored paint.\u003c\/li\u003e\n        \u003cli\u003eTopcoat + Stain or Paint\u003c\/li\u003e\n        \u003cli\u003eMilk Paint + Chalk Style Paint\u003c\/li\u003e\n        \u003cli\u003eWater Based Wood Stain + Dye Stain\u003c\/li\u003e\n      \u003c\/ul\u003e\n      \u003c!--\/.accordion-content--\u003e\n    \u003c\/div\u003e\n  \u003c\/article\u003e\n  \u003c!-- End: Storage of Water-Based Products -----------------------------------------------\u003e\n  \n  \u003c!-- Furniture Care and Maintenance ---------------------------------------------------\u003e\n  \u003carticle\u003e\n  \n    \u003ch4\u003eFurniture Care \u0026amp; Maintenance\u003c\/h4\u003e\n    \u003cdiv\u003e\n      \u003ch4\u003eCure First\u003c\/h4\u003e\n      \u003cp\u003eYou have just finished applying a fine furniture finish. Treat gently\n        until the paint or topcoat have fully cured. Allow 21 days for a water-based\n        finish to cure and 30 days for an oil-based finish to cure before cleaning.\u003c\/p\u003e\n      \u003ch4\u003eRegular Cleaning and Maintenance\u003c\/h4\u003e\n      \u003cul\u003e\n        \u003cli\u003eRemove dust with a water-dampened cloth. Dust can build up over time\n          and may scratch or dull finishes if not removed regularly. \u003c\/li\u003e\n        \u003cli\u003eRemove fingerprints, cooking fumes and smoking residue with mild soap\n          and water. These contaminants will not harm the finish, but they accumulate\n          on surfaces and dull the original luster. \u003c\/li\u003e\n        \u003cli\u003eAs with all fine furniture finishes, avoid using furniture polish,\n          cleaners or dusting sprays that contain silicone, alcohol, ammonia and\n          anything acidic. Exception: We have successfully cleaned with Clorox wipes.\u003c\/li\u003e\n        \u003cli\u003eClean up water, alcohol and food spills in a timely manner and use\n          placemats \u0026amp; coasters to protect the finish.\u003c\/li\u003e\n        \u003cli\u003eFuture finishes or touch-ups may not adhere properly or perform as\n          desired over a contaminated surface. Some contaminants, such as silicone,\n          seep through finish into the wood and often cannot be removed.\u003c\/li\u003e\n        \u003cli\u003eAvoid excessive exposure to direct sunlight, high temperatures or\n          high humidity. These can damage furniture and finishes.\u003c\/li\u003e\n      \u003c\/ul\u003e\n      \u003c!--\/.accordion-content--\u003e\n    \u003c\/div\u003e\n  \u003c\/article\u003e\n  \u003c!-- End: Furniture Care and Maintenance -----------------------------------------------\u003e\n  \n  \u003c\/div\u003e\n  \u003c!-- End Accordian: Instructions -----------------------------------------------\u003e\n","brand":"General Finishes","offers":[{"title":"Gallon \/ Dead Flat","offer_id":41909203992643,"sku":"GF-PCDFG","price":116.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Flat","offer_id":8114249367671,"sku":"GF-PCFG","price":116.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Satin","offer_id":8114249171063,"sku":"GF-PCSG","price":116.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Semi-Gloss","offer_id":8114249072759,"sku":"GF-PCSGG","price":116.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Gloss","offer_id":8114249269367,"sku":"GF-PCGG","price":116.0,"currency_code":"USD","in_stock":true},{"title":"5 Gallon \/ Dead Flat","offer_id":41909207269443,"sku":"GF-PCDF5G","price":460.0,"currency_code":"USD","in_stock":true},{"title":"5 Gallon \/ Flat","offer_id":8114249400439,"sku":"GF-PCF5G","price":460.0,"currency_code":"USD","in_stock":true},{"title":"5 Gallon \/ Satin","offer_id":8114249203831,"sku":"GF-PCS5G","price":460.0,"currency_code":"USD","in_stock":true},{"title":"5 Gallon \/ Semi-Gloss","offer_id":8114249105527,"sku":"GF-PCSG5G","price":460.0,"currency_code":"USD","in_stock":true},{"title":"5 Gallon \/ Gloss","offer_id":8114249302135,"sku":"GF-PCG5G","price":460.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/7892\/files\/gf-product-render-WATER-BASED-TOPCOAT-ENDURO-CLEAR-POLY-dead-flat-GALLON-CLOSED-v2-thick-banding-1000PX-general-finishes-2023.jpg?v=1730312315"},{"product_id":"nco-conversion-varnish-catalyst-general-finishes-additives","title":"General Finishes NCO Conversion Varnish Catalyst, Additives","description":"\u003cspan\u003eEnduro Pigmented Poly is a high-solids, water-based wood finish ideal for cabinets and millwork. Stocked in Black and White, custom colors available upon request.\u003c\/span\u003e\u003cspan\u003e It can also be used with General Finishes Glaze Effects.\u003c\/span\u003e","brand":"General Finishes","offers":[{"title":"12 oz","offer_id":8114250743927,"sku":"GF-CAT","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/7892\/products\/GeneralFinishesCVCatalyst.jpg?v=1659709451"},{"product_id":"brush-gun-cleaner-general-finishes-cleaners-supplies","title":"General Finishes Brush\/Gun Cleaner, Cleaners \u0026 Supplies","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eKeep your spray gun operating at peak performance with General Finishes Brush \u0026amp; Gun Cleaner.\u003c\/span\u003e\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Gallon","offer_id":8114250809463,"sku":"GF-BGGA","price":41.0,"currency_code":"USD","in_stock":true},{"title":"5 Gallon","offer_id":8114250842231,"sku":"GF-BG5G","price":184.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/7892\/files\/product-WATER-BASED-BRUSH-AND-GUN-CLEANER-GALLON-CLOSED-1000PX-general-finishes-2018.jpg?v=1732116630"},{"product_id":"black-water-based-poly-top-coat-general-finishes","title":"General Finishes Black Water Based Poly Top Coat","description":"\u003c!-- Start: Topcoat Description -----------------------------------------------\u003e\n\u003cp\u003eEnduro Black Poly is a high-solids, pigmented water-based wood finish ideal for cabinets and millwork. We also have \u003ca href=\"https:\/\/procabinetsupply.com\/products\/white-water-based-poly-top-coat-general-finishes\" title=\"General Finishes White Poly Paint\"\u003eGeneral Finishes White Poly Paint\u003c\/a\u003e in stock, and custom colors are available for wholesale customers upon request. White and Clear can be used as tint bases to achieve endless colors. General Finishes Black Polys can be used with \u003ca href=\".\/water-based-glaze-general-finishes-finish-effects\"\u003eGeneral Finishes Glaze Effects\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003ePlease click the below headers to reveal the instructional info for this product.\u003c\/p\u003e\n\u003c!-- Start Accordian: Instructions -----------------------------------------------\u003e\n\u003cdiv\u003e\n\u003c!-- Step 1: Preparation of Black Poly ---------------------------------------------------\u003e\n\u003carticle\u003e\n\u003ch4\u003eStep 1: Preparation for Black Poly\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cp\u003eAll wood projects require preparation sanding, and all existing finishes require prep cleaning and sanding. If you skip this critical step, your finish may fail.\u003c\/p\u003e\n\u003ch4\u003ePreparation for Raw Wood or Raw Wood Projects That Are to be Stained\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eSanding Schedule: 120-grit followed by 150- or 220-grit sandpaper.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003cli\u003eLet dry completely before applying GF product.\u003c\/li\u003e\n\u003cli\u003eDo not over-sand with fine-grit sandpapers; this will close and seal the wood grain, preventing ideal color absorption.\u003c\/li\u003e\n\u003cli\u003eDo NOT use steel wool with water-based finishes; the particles will get trapped in the finish and rust.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003ePreparation for Projects with an Existing Finish (Sealed Surface)\u003c\/h4\u003e\n\u003cp\u003eFor high-use areas with heavy grime build-up and oil from hands, give your project a deeper cleaning.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eScuff clean with a Scotch Brite™ pad and a 50:50 mix of denatured alcohol and water. Dry 1-2 hours. Avoid cleaning with products containing phosphates (salt), which can linger in the substrate and produce a white haze. If your project requires a deeper cleaning, see Power Prep Cleaning Highly Used Existing Finishes below.\u003c\/li\u003e\n\u003cli\u003eSand lightly with a fine-grade (220-320) foam sanding pad.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003cli\u003eLet dry completely before applying General Finishes product.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003ePower Prep Cleaning Highly Used Existing Finishes\u003c\/h4\u003e\n\u003cp\u003eFor high-use areas such as kitchen cabinets or table tops with heavy grime build-up and oil from hands, give your project a \"Power\" clean.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eScrub clean with a detergent, such as Spic and Span or Dawn, using a Scotch Brite™ pad.\u003c\/li\u003e\n\u003cli\u003eRinse well with water.\u003c\/li\u003e\n\u003cli\u003eScrub clean with a Scotch Brite™ pad and a 50:50 mix of denatured alcohol and water. Dry 1-2 hours.\u003c\/li\u003e\n\u003cli\u003eSand lightly with a fine-grade (220-320) foam sanding pad.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003cli\u003eLet dry completely before applying General Finishes product.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eAlternative Cleaning Solutions For Existing Finishes (Not as aggressive or effective as denatured alcohol; requires rinsing.)\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e50:50 mix of bleach and water\u003c\/li\u003e\n\u003cli\u003e50:50 mix of vinegar and water\u003c\/li\u003e\n\u003cli\u003eMineral spirits can be used when working with water-based products, but only if the surface is thoroughly rinsed and allowed to dry for 72 hours.\u003c\/li\u003e\n\u003cli\u003eIf you use with products containing phosphates (salt), which can linger in the substrate and produce a white haze, be sure to rinse thoroughly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!--\/.accordion-content--\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- End: Accordian Step 1 -----------------------------------------------\u003e \u003c!-- Step 2: How to Apply Black Poly ------------------------------------------\u003e\n\u003carticle\u003e\n\u003ch4\u003eStep 2: How to Apply General Finishes Black Poly\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003ch4\u003eGeneral Finishes Enduro Black Poly Application Steps\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eStir to reincorporate solids that have settled to the bottom of the can before and throughout the application process.\u003c\/li\u003e\n\u003cli\u003eThin as desired with distilled water; start with 5%, increase up to 10% by volume. Increase open time, if needed, with up to 5% \u003ca href=\".\/water-based-extender-general-finishes-additives\"\u003eGeneral Finishes Extender\u003c\/a\u003e if allowed by local regulations. GF Extender will improve flow and leveling and increase open time, which is helpful in dry climates. California Residents: Adding more than 2% of GF Extender will make the products non-compliant per SCAQMD Regulations. GF assumes no liability for the improper use of these products.\u003c\/li\u003e\n\u003cli\u003eApply 3 coats. Additional coats will not improve durability.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eFace frames: Enduro professional products are engineered to be spray-only but can be successfully applied to cabinet face frames, edges, or drawer fronts with a small cabinet-specific 3\/8\" nap microfiber roller such as Whizz or AllPro brand. Larger areas may not level. Add 10-20% Extender for improved results. ALTERNATIVE: Use the same sheen of \u003ca href=\".\/water-based-clear-high-performance-poly-top-coat-general-finishes\"\u003eGeneral Finishes High Performance Topcoat\u003c\/a\u003e on areas that must be brushed.\u003c\/li\u003e\n\u003cli\u003eIf a faster build is desired over raw wood, use \u003ca href=\".\/water-based-sanding-sealer-general-finishes\"\u003eGeneral Finishes Sanding Sealer\u003c\/a\u003e for the first coat, followed by 2 coats of Black Poly.\u003c\/li\u003e\n\u003cli\u003eDry 2+ hours between coats in ideal conditions: 70°F 20°C; 50-70% humidity. Be sure to allow adequate dry time. You can tell if a water-based finish is dry if it forms a powder when lightly sanded with a fine-grade (220-320) foam sanding pad. If in doubt, wait longer. Rushing the dry time can cause \"blush,\" which is clouding in the finish due to moisture trapped between the layers. Increase dry time if:\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eHumidity is over 80%\u003c\/li\u003e\n\u003cli\u003e3+ coats are applied\u003c\/li\u003e\n\u003cli\u003eThick coats are applied\u003c\/li\u003e\n\u003cli\u003eApplying over an existing sealed finish\u003c\/li\u003e\n\u003cli\u003eApplying over products from other brands\u003c\/li\u003e\n\u003cli\u003eLayering General Finishes water- and oil-based products:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eWater over oil: Let oil-based products dry 72+hr before applying water-based products\u003c\/li\u003e\n\u003cli\u003eOil over water: Let water-based products dry 24+hr before applying oil-based products\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eTo accelerate dry time in humid conditions, add \u003ca href=\".\/water-based-accelerator-general-finishes-additives\"\u003eGeneral Finishes Accelerator\u003c\/a\u003e and work in a space with good ventilation and air movement. If you decide to re-coat before the recommended time, test dryness.\u003c\/li\u003e\n\u003cli\u003eFinish sand between coats with a fine-grade (220-320) foam sanding pad to improve smoothness and adhesion.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003cli\u003eOptional: seal with your choice of General Finishes water based topcoat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCure Time\u003c\/h4\u003e\n\u003cp\u003eWater-based finishes cure and harden for full use after 21 days in ideal conditions. Avoid placing heavy objects on surfaces that have not completely cured. Treat gently, and do not clean with commercial products during the curing period.\u003c\/p\u003e\n\u003cp\u003eWarning: Do not use water-based products with Linseed Oils or Danish Oils.\u003c\/p\u003e\n\u003c!--\/.accordion-content--\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- End: Accordian Step 2 -----------------------------------------------\u003e \u003c!-- Storage of Water-Based Products ---------------------------------------------------\u003e\n\u003carticle\u003e\n\u003ch4\u003eStorage of Water-Based Products\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cp\u003ePlease be mindful of the manner in which water-based products are stored and how long they have been in storage. They are not a forever product.\u003c\/p\u003e\n\u003ch4\u003eLife of Product\u003c\/h4\u003e\n\u003cp\u003eWater-based products do not last forever, even when unopened. General Finishes products are best used within 1 year of the manufacture date listed on the can. However, the life of the product may be extended with proper care and storage (see Storage Tips below).\u003c\/p\u003e\n\u003cp\u003eWater-based products can last 3-5 years if the can is unopened, in good condition and stored in correct temperatures.\u003c\/p\u003e\n\u003cp\u003eProduct that is 3 years old will not look like product that is 6 months to 1 year old. You will see more stratification or separation as the product ages. Always stir thoroughly before using.\u003c\/p\u003e\n\u003ch4\u003eFoul Smell\u003c\/h4\u003e\n\u003cp\u003eIf your product has a foul smell, it is contaminated and no longer in useable condition.\u003c\/p\u003e\n\u003ch4\u003eClumps \u0026amp; Settling\u003c\/h4\u003e\n\u003cp\u003eGravity can cause some solids to settle on the bottom of the can and slight separation on the top. This is normal. If working with older product stir with a paint mixing attachment on a drill.\u003c\/p\u003e\n\u003cp\u003eIf the solids dissolve and clumps smooth out after mixing from the bottom, the product is in good condition for use.\u003c\/p\u003e\n\u003cp\u003eInability to reincorporate large, chunky lumps after stirring for several minutes is an indication that the product has frozen and can no longer be used.\u003c\/p\u003e\n\u003ch4\u003eStorage Tips\u003c\/h4\u003e\n\u003cp\u003eWater-based finishes crystalize and form a skin due to evaporation when the air-tight seal on a can is broken at first use. The following best practices will increase the life of your product:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ePry open sealed lids with a paint can opener by hooking under the lid's rolled edge. The use of a screwdriver can disfigure the rim and lid, impairing a complete seal.\u003c\/li\u003e\n\u003cli\u003eKeep lid closed while working. Pour what you will use into a bowl, paper cup, or plate, and close can lid as you work.\u003c\/li\u003e\n\u003cli\u003eClean the chime of the can thoroughly with a paper towel before closing to create a complete seal. Product falling into the chime can be minimized by using a pouring lid, such as Fitsall. Avoid wiping used brushes on the lid.\u003c\/li\u003e\n\u003cli\u003ePound the lid in place using a rubber mallet to avoid distorting the chime or lid. Dents in the lid from direct contact with a hammer can impair a complete seal. Alternatively, place a flat piece of wood over can lid and firmly pound shut.\u003c\/li\u003e\n\u003cli\u003eStore in moderate temperatures. Avoid temperatures below 50°F\/10°C or above 100°F\/26°C. Keep from freezing. Frozen and heat-damaged product cannot be revitalized. Temperature-controlled spaces, such as a basement, are ideal for storage. Do not store product in an attic, garage, in direct sunlight, or next to something warm like a water heater or furnace.\u003c\/li\u003e\n\u003cli\u003eStore can upside down to create a liquid seal, minimize evaporation and reduce the chance of crystallization. Decant remaining product from the can before stirring.\u003c\/li\u003e\n\u003cli\u003eDecant leftovers to a smaller container when the finish is almost used up. Alternative storage containers for water-based products are plastic FIFO bottles or glass bottles. Do not fill metal-lidded containers completely to prevent them from rusting.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eThe following water-based product mistures can be stored:\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eProduct thinned with up to 15% \u003ca href=\".\/water-based-extender-general-finishes-additives\"\u003eGeneral Finishes Extender\u003c\/a\u003e or \u003ca href=\".\/water-based-accelerator-general-finishes-additives\"\u003eGeneral Finishes Accelerator\u003c\/a\u003e, with the exception of thinned \u003ca href=\".\/water-based-wiping-stain-general-finishes\"\u003eGeneral Finishes Water Based Wood Stain\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eMixtures involving colors \u0026amp; sheens within the same product line, such as:\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Performance Satin + High Performance Gloss\u003c\/li\u003e\n\u003cli\u003eSnow White Milk Paint + Coastal Blue Milk Paint\u003c\/li\u003e\n\u003cli\u003eAmber Dye Stain + Merlot Dye Stain\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eThe following product mixtures should NOT be stored:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAny water based product with thinned tap water; water often contains bacteria that will adversely affect stored paint.\u003c\/li\u003e\n\u003cli\u003eTopcoat + Stain or Paint\u003c\/li\u003e\n\u003cli\u003eMilk Paint + Chalk Style Paint\u003c\/li\u003e\n\u003cli\u003eWater Based Wood Stain + Dye Stain\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!--\/.accordion-content--\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- End: Storage of Water-Based Products -----------------------------------------------\u003e \u003c!-- Furniture Care and Maintenance ---------------------------------------------------\u003e\n\u003carticle\u003e\n\u003ch4\u003eFurniture Care \u0026amp; Maintenance\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003ch4\u003eCure First\u003c\/h4\u003e\n\u003cp\u003eYou have just finished applying a fine furniture finish. Treat gently until the paint or topcoat have fully cured. Allow 21 days for a water-based finish to cure and 30 days for an oil-based finish to cure before cleaning.\u003c\/p\u003e\n\u003ch4\u003eRegular Cleaning and Maintenance\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eRemove dust with a water-dampened cloth. Dust can build up over time and may scratch or dull finishes if not removed regularly.\u003c\/li\u003e\n\u003cli\u003eRemove fingerprints, cooking fumes and smoking residue with mild soap and water. These contaminants will not harm the finish, but they accumulate on surfaces and dull the original luster.\u003c\/li\u003e\n\u003cli\u003eAs with all fine furniture finishes, avoid using furniture polish, cleaners or dusting sprays that contain silicone, alcohol, ammonia and anything acidic. Exception: We have successfully cleaned with Clorox wipes.\u003c\/li\u003e\n\u003cli\u003eClean up water, alcohol and food spills in a timely manner and use placemats \u0026amp; coasters to protect the finish.\u003c\/li\u003e\n\u003cli\u003eFuture finishes or touch-ups may not adhere properly or perform as desired over a contaminated surface. Some contaminants, such as silicone, seep through finish into the wood and often cannot be removed.\u003c\/li\u003e\n\u003cli\u003eAvoid excessive exposure to direct sunlight, high temperatures or high humidity. These can damage furniture and finishes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!--\/.accordion-content--\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- End: Furniture Care and Maintenance -----------------------------------------------\u003e\n\u003c\/div\u003e\n\u003c!-- End Accordian: Instructions -----------------------------------------------\u003e","brand":"General Finishes","offers":[{"title":"Gallon \/ Satin","offer_id":8114250973303,"sku":"GF-PBSG","price":124.0,"currency_code":"USD","in_stock":false},{"title":"Gallon \/ Semi-Gloss","offer_id":8114250907767,"sku":"GF-PBSGG","price":124.0,"currency_code":"USD","in_stock":true},{"title":"5 Gallon \/ Satin","offer_id":8114251006071,"sku":"GF-PBS5G","price":460.0,"currency_code":"USD","in_stock":true},{"title":"5 Gallon \/ Semi-Gloss","offer_id":8114250940535,"sku":"GF-PBSG5G","price":460.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/7892\/files\/gf-product-render-WATER-BASED-PIGMENTED-TOPCOAT-ENDURO-BLACK-POLY-satin-GALLON-CLOSED-v2-thick-banding-1000PX-general-finishes-2023.jpg?v=1730311419"},{"product_id":"water-based-accelerator-general-finishes-additives","title":"General Finishes Water Based Accelerator, Additives","description":"\u003cp\u003e\u003cspan\u003eAccelerator is an additive that decreases dry time of General Finishes water-based products, which is helpful in humid conditions where dry time is normally extended. Available in gallons and 16 ounce sizes.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Pint","offer_id":8114251038839,"sku":"GF-PTAC","price":17.0,"currency_code":"USD","in_stock":true},{"title":"Gallon","offer_id":8114251071607,"sku":"GF-GACC","price":68.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/7892\/products\/ptac.png?v=1577706341"},{"product_id":"flat-out-flat-clear-water-based-wax-top-coat-general-finishes","title":"General Finishes Flat Out Flat Clear Water Based Wax Top Coat","description":"\u003cp\u003eFlat Out Flat is a self-crosslinking water-based topcoat that mimics the lustrous look and feel of wax. The increased matting agents used to create \"flat look\" cause this wood finish to have less clarity, show fingerprints more and provide slightly less durability than High Performance. It is recommended for low-contact projects, other than kitchen cabinets and table tops.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Quart \/ Flat","offer_id":8114251137143,"sku":"GF-FFQ","price":41.5,"currency_code":"USD","in_stock":true},{"title":"Pint \/ Flat","offer_id":8114251169911,"sku":"GF-FFP","price":28.5,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Flat","offer_id":8114251202679,"sku":"GF-FFG","price":108.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/7892\/products\/fqt.png?v=1577706341"},{"product_id":"water-based-wiping-stain-general-finishes-ready-to-mix-rtm","title":"General Finishes Water Based Wiping Stain, Ready To Mix (RTM)","description":"\u003cspan\u003eGeneral Finishes Ready To Match (RTM) Stain System\u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003eis a water-based stain color-matching system designed to make your color-matching ability a breeze. This system has 10 standard stain bases and a clear that are intermixed to make 150 different rich, deep wood stain colors.\u003c\/span\u003e","brand":"General Finishes","offers":[{"title":"Quart \/ Trans Red","offer_id":8114256543863,"sku":"GF-RTROQ","price":31.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Trans Red","offer_id":8114256576631,"sku":"GF-RTROG","price":70.0,"currency_code":"USD","in_stock":true},{"title":"5 Gallon \/ Trans Red","offer_id":8114256609399,"sku":"GF-5TR","price":256.67,"currency_code":"USD","in_stock":false},{"title":"Quart \/ Tint White","offer_id":8114256642167,"sku":"GF-RTWQ","price":31.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Tint White","offer_id":8114256674935,"sku":"GF-RTWG","price":70.0,"currency_code":"USD","in_stock":true},{"title":"5 Gallon \/ Tint White","offer_id":8114256707703,"sku":"GF-RTW5G","price":288.0,"currency_code":"USD","in_stock":true},{"title":"Quart \/ Tint Black","offer_id":8114256740471,"sku":"GF-RTBLQ","price":31.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Tint Black","offer_id":8114256773239,"sku":"GF-RTBLG","price":70.0,"currency_code":"USD","in_stock":true},{"title":"5 Gallon \/ Tint Black","offer_id":8114256806007,"sku":"GF-RTBL5G","price":288.0,"currency_code":"USD","in_stock":true},{"title":"Quart \/ Tint Base Clear","offer_id":8114256838775,"sku":"GF-RTBCQ","price":25.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Tint Base Clear","offer_id":8114256871543,"sku":"GF-RTBCG","price":41.5,"currency_code":"USD","in_stock":true},{"title":"5 Gallon \/ Tint Base Clear","offer_id":8114256904311,"sku":"GF-RTBC5G","price":154.0,"currency_code":"USD","in_stock":true},{"title":"Quart \/ Tavern Brown","offer_id":8114256937079,"sku":"GF-RTBQ","price":31.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Tavern Brown","offer_id":8114256969847,"sku":"GF-RTBG","price":70.0,"currency_code":"USD","in_stock":true},{"title":"5 Gallon \/ Tavern Brown","offer_id":8114257002615,"sku":"GF-5TVB","price":256.67,"currency_code":"USD","in_stock":false},{"title":"Quart \/ Red","offer_id":8114257035383,"sku":"GF-RRQ","price":31.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Red","offer_id":8114257068151,"sku":"GF-RRG","price":70.0,"currency_code":"USD","in_stock":true},{"title":"5 Gallon \/ Red","offer_id":8114257100919,"sku":"GF-5RED","price":256.67,"currency_code":"USD","in_stock":false},{"title":"Quart \/ Raw Umber","offer_id":8114257133687,"sku":"GF-RRUQ","price":31.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Raw Umber","offer_id":8114257166455,"sku":"GF-RRUG","price":70.0,"currency_code":"USD","in_stock":true},{"title":"5 Gallon \/ Raw Umber","offer_id":8114257199223,"sku":"GF-RRU5G","price":288.0,"currency_code":"USD","in_stock":true},{"title":"Quart \/ Raw Sienna","offer_id":8114257231991,"sku":"GF-RRSQ","price":31.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Raw Sienna","offer_id":8114257264759,"sku":"GF-RRSG","price":70.0,"currency_code":"USD","in_stock":true},{"title":"5 Gallon \/ Raw Sienna","offer_id":8114257297527,"sku":"GF-TRS","price":256.67,"currency_code":"USD","in_stock":false},{"title":"Quart \/ Golden Brown","offer_id":8114257330295,"sku":"GF-RGBQ","price":31.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Golden Brown","offer_id":8114257363063,"sku":"GF-RGBG","price":70.0,"currency_code":"USD","in_stock":true},{"title":"5 Gallon \/ Golden Brown","offer_id":8114257395831,"sku":"GF-RGB5G","price":288.0,"currency_code":"USD","in_stock":true},{"title":"Quart \/ Burnt Umber","offer_id":8114257428599,"sku":"GF-RBUQ","price":31.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Burnt Umber","offer_id":8114257461367,"sku":"GF-RBUG","price":70.0,"currency_code":"USD","in_stock":true},{"title":"5 Gallon \/ Burnt Umber","offer_id":8114257494135,"sku":"GF-RBU5G","price":288.0,"currency_code":"USD","in_stock":true},{"title":"Quart \/ Bordeaux","offer_id":8114257526903,"sku":"GF-RBOQ","price":31.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Bordeaux","offer_id":8114257559671,"sku":"GF-RBOG","price":70.0,"currency_code":"USD","in_stock":true},{"title":"5 Gallon \/ Bordeaux","offer_id":8114257592439,"sku":"GF-5BD","price":256.67,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/7892\/products\/qro.png?v=1577706410"},{"product_id":"water-based-pre-cat-lacquer-top-coat-general-finishes","title":"General Finishes Water Based Pre-Cat Lacquer Top Coat","description":"\u003c!-- Start: Topcoat Description -----------------------------------------------\u003e\n\u003cp\u003eGeneral Finishes Enduro water-based pre-catalyzed lacquer clear-drying wood finish uses new technology in the polymer manufacturing process. This novel formula produces a smaller and smoother polymer particle, which translates into a big increase in film clarity. In addition, this pre-catalyzed lacquer's chemical, water, and yellowing resistance are superior to competitors, waterborne or solvent.\u003c\/p\u003e\n\u003cp\u003ePlease click the below headers to reveal the instructional info for this product.\u003c\/p\u003e\n\u003c!-- Start Accordian: Instructions -----------------------------------------------\u003e\n\u003cdiv\u003e\n\u003c!-- Step 1: Preparation of Pre-Cat Lacquer ---------------------------------------------------\u003e\n\u003carticle\u003e\n\u003ch4\u003eStep 1: Preparation for Pre-Catalyzed Lacquer\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cp\u003eAll wood projects require preparation sanding, and all existing finishes require prep cleaning and sanding. If you skip this critical step, your finish may fail.\u003c\/p\u003e\n\u003ch4\u003ePreparation for Raw Wood or Raw Wood Projects That Are to be Stained\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eSanding Schedule: 120-grit followed by 150- or 220-grit sandpaper.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003cli\u003eLet dry completely before applying GF product.\u003c\/li\u003e\n\u003cli\u003eDo not over-sand with fine-grit sandpapers; this will close and seal the wood grain, preventing ideal color absorption.\u003c\/li\u003e\n\u003cli\u003eDo NOT use steel wool with water-based finishes; the particles will get trapped in the finish and rust.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003ePreparation for Projects with an Existing Finish (Sealed Surface)\u003c\/h4\u003e\n\u003cp\u003eFor high-use areas with heavy grime build-up and oil from hands, give your project a deeper cleaning.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eScuff clean with a Scotch Brite™ pad and a 50:50 mix of denatured alcohol and water. Dry 1-2 hours. Avoid cleaning with products containing phosphates (salt), which can linger in the substrate and produce a white haze. If your project requires a deeper cleaning, see Power Prep Cleaning Highly Used Existing Finishes below.\u003c\/li\u003e\n\u003cli\u003eSand lightly with a fine-grade (220-320) foam sanding pad.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003cli\u003eLet dry completely before applying General Finishes product.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003ePower Prep Cleaning Highly Used Existing Finishes\u003c\/h4\u003e\n\u003cp\u003eFor high-use areas such as kitchen cabinets or table tops with heavy grime build-up and oil from hands, give your project a \"Power\" clean.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eScrub clean with a detergent, such as Spic and Span or Dawn, using a Scotch Brite™ pad.\u003c\/li\u003e\n\u003cli\u003eRinse well with water.\u003c\/li\u003e\n\u003cli\u003eScrub clean with a Scotch Brite™ pad and a 50:50 mix of denatured alcohol and water. Dry 1-2 hours.\u003c\/li\u003e\n\u003cli\u003eSand lightly with a fine-grade (220-320) foam sanding pad.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003cli\u003eLet dry completely before applying General Finishes product.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eAlternative Cleaning Solutions For Existing Finishes (Not as aggressive or effective as denatured alcohol; requires rinsing.)\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e50:50 mix of bleach and water\u003c\/li\u003e\n\u003cli\u003e50:50 mix of vinegar and water\u003c\/li\u003e\n\u003cli\u003eMineral spirits can be used when working with water-based products, but only if the surface is thoroughly rinsed and allowed to dry for 72 hours.\u003c\/li\u003e\n\u003cli\u003eIf you use with products containing phosphates (salt), which can linger in the substrate and produce a white haze, be sure to rinse thoroughly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!--\/.accordion-content--\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- End: Accordian Step 1 -----------------------------------------------\u003e \u003c!-- Step 2: How to Apply Pre-Cat Lacquer ------------------------------------------\u003e\n\u003carticle\u003e\n\u003ch4\u003eStep 2: How to Apply General Finishes Pre-Cat Lacquer\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cp\u003eCAUTION: Do NOT use GF Pre-Cat Lacquer or any other clear coat, over white or light paints such as \u003ca href=\".\/water-based-milk-paint-general-finishes-specialty-coatings\"\u003eGeneral Finishes Milk Paint\u003c\/a\u003e, or \u003ca href=\".\/white-water-based-poly-top-coat-general-finishes\"\u003eGeneral Finishes Enduro White Poly\u003c\/a\u003e as it may cause yellowing. Any clear coat can become reactive over wood substrates or existing finishes causing tannin, stain or dye bleed-through. All of GF's White Paints, brushable or spray versions, do NOT require a topcoat.\u003c\/p\u003e\n\u003cp\u003eEnduro Pre-Cat Lacquer is a hard topcoat engineered for a good price point. If higher durability is needed, use \u003ca href=\".\/clear-water-based-poly-top-coat-general-finishes\"\u003eEnduro Clear Poly\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch4\u003ePre-Cat Lacquer Application Steps\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eStir to reincorporate solids that have settled to the bottom of the can before and throughout the application process.\u003c\/li\u003e\n\u003cli\u003eThin as desired with distilled water; start with 5%, increase up to 10% by volume. Increase open time, if needed, with up to 5% \u003ca href=\".\/water-based-extender-general-finishes-additives\"\u003eGeneral Finishes Extender\u003c\/a\u003e if allowed by local regulations. GF Extender will improve flow and leveling and increase open time, which is helpful in dry climates. California Residents: Adding more than 2% of GF Extender will make the products non-compliant per SCAQMD Regulations. GF assumes no liability for the improper use of these products.\u003c\/li\u003e\n\u003cli\u003eApply 3 coats of Pre-Cat Lacquer. More coats will not improve durability.\n\u003cul\u003e\n\u003cli\u003eSpray Application: Before spraying, strain topcoat through a fine-mesh filter. Spray wet films at 3-5-mil thickness. HVLP: 1.1mm-1.3mm spray tip, medium air cap. Verify tip sizes with your equipment supplier. \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0062\/7892\/files\/gf-hvlp-spray-tip-sizes.pdf?13835\"\u003eSee our general guide for spray tip sizes\u003c\/a\u003e. Keep your gun at a 90° angle, 6-8\" from the surface. On large, flat areas, use wet, even patterns 6-8\" wide. For narrow surfaces, reduce the fan pattern to 2-3\" wide to reduce overspray. Overlap each pass 25% to conceal lines. Wear a full filter respirator (NIOSH\/MSHA approved) and work in a ventilated space.\u003c\/li\u003e\n\u003cli\u003eFace frames and drawers on cabinets: Enduro professional products are engineered to be spray-only but can be successfully applied by hand to cabinet face frames or edges with a brush, pad or small, cabinet-specific roller such as Whizz or AllPro Velour brand. Larger areas may not level with a hand application. ALTERNATIVE: Use the same sheen of \u003ca href=\".\/water-based-clear-high-performance-poly-top-coat-general-finishes\"\u003eGeneral Finishes High Performance Topcoat\u003c\/a\u003e on areas that must be brushed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eIf a faster build is desired over raw wood, use \u003ca href=\".\/water-based-sanding-sealer-general-finishes\"\u003eGeneral Finishes Sanding Sealer\u003c\/a\u003e for the 1-2 coats, followed by 2 coats of Pre-Cat Lacquer.\u003c\/li\u003e\n\u003cli\u003eDry 2+ hours between coats in ideal conditions: 70°F 20°C; 50% humidity. Be sure to allow adequate dry time. You can tell if a water-based finish is dry if it forms a powder when lightly sanded with a fine-grade (220-320) foam sanding pad. If in doubt, wait longer. Rushing the dry time can cause \"blush\", which is clouding in the finish due to moisture trapped between the layers. Increase dry time if:\n\u003cul\u003e\n\u003cli\u003eHumidity is over 80%\u003c\/li\u003e\n\u003cli\u003e3+ coats are applied\u003c\/li\u003e\n\u003cli\u003eThick coats are applied\u003c\/li\u003e\n\u003cli\u003eApplying over an existing sealed finish\u003c\/li\u003e\n\u003cli\u003eApplying over products from other brands\u003c\/li\u003e\n\u003cli\u003eLayering General Finishes water- and oil-based products:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eWater over oil: Let oil-based products dry 72+hr before applying water-based products\u003c\/li\u003e\n\u003cli\u003eOil over water: Let water-based products dry 24+hr before applying oil-based products\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eTo accelerate dry time in humid conditions, add \u003ca href=\".\/water-based-accelerator-general-finishes-additives\"\u003eGeneral Finishes Accelerator\u003c\/a\u003e and work in a space with good ventilation and air movement. If you decide to re-coat before the recommended time, test dryness.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eFinish sand between coats with a fine-grade (220-320) foam sanding pad to improve smoothness and adhesion.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, oil-free tack cloth or clean, water-dampened rag before re-coating.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eCure Time\u003c\/h4\u003e\n\u003cp\u003eWater-based finishes cure and harden for full use after 21 days in ideal conditions. Avoid placing heavy objects on surfaces that have not completely cured. Treat gently, and do not clean with commercial products during the curing period.\u003c\/p\u003e\n\u003ch4\u003eTinting \u0026amp; Toning with Pre-Cat Lacquer\u003c\/h4\u003e\n\u003cp\u003eWhen tinting, we recommend using General Finishes Enduro Poly or High Performance Topcoat for tinting instead of Pre-Cat Lacquer because they have higher solids.\u003c\/p\u003e\n\u003cp\u003eWhen toning, add up to 10% \u003ca href=\".\/water-based-dye-stain-general-finishes\"\u003eGeneral Finishes Dye Stain\u003c\/a\u003e, \u003ca href=\".\/water-based-wiping-stain-general-finishes\"\u003eGeneral Finishes Water Based Wood Stain\u003c\/a\u003e, \u003ca href=\".\/water-based-wiping-stain-general-finishes-ready-to-mix-rtm\"\u003eGeneral Finishes Ready-to-Match (RTM) Stain\u003c\/a\u003e, or Trans Tints. To deepen the color, add a second coat.\u003c\/p\u003e\n\u003cp\u003eWarning: Do not use water-based products with Linseed Oils or Danish Oils.\u003c\/p\u003e\n\u003c!--\/.accordion-content--\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- End: Accordian Step 2 -----------------------------------------------\u003e \u003c!-- Yellowing \u0026 Clear Topcoat ---------------------------------------------------\u003e\n\u003carticle\u003e\n\u003ch4\u003eYellowing \u0026amp; Clear Topcoat\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cp\u003eAs is true of most \"water-white\" topcoats, General Finishes water-based topcoats dry clear over non-reactive substrates, such as plastic or metal, except \u003ca href=\".\/clear-enduro-var-water-based-top-coat-general-finishes\"\u003eGeneral Finishes Enduro-Var\u003c\/a\u003e, which ambers. When white paint sealed with a water-white topcoat is applied to something as unpredictable as wood, all bets are off and the reason for yellowing is often unknown. It can be caused by topcoat activating tannins in raw wood or aniline dyes, stains, or contaminants in a pre-existing finish. This is most evident when using BRIGHT WHITE paint and most prevalent in sculpted details of furniture where the topcoat can collect, intensifying color change to an unacceptable level.\u003c\/p\u003e\n\u003cp\u003eThere is no reliable way to predict whether yellowing will occur and to what degree. Every existing finish is different and we rarely know the finishing provenance on an existing piece. Every tree is different and every piece of wood is unique. Raw wood can bleed tannins immediately after the topcoat dries or months later with seasonal temperature changes. Oak, pine, mahogany, and douglas fir are particularly prone to bleed-through.\u003c\/p\u003e\n\u003ch4\u003eSummary\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eWhites have a lower “hide” quality and are more transparent than most other colors. Nearly all bright whites require additional coats to achieve the desired color and minimize color variation. This can increase the cost of paint finishing. Always include a clause in your contracts addressing the need for additional coats to achieve coverage.\u003c\/li\u003e\n\u003cli\u003eAll bright white paint will yellow slightly with time, with or without topcoat. You have probably tried to touch up white woodwork in your home after several years and noticed the new paint is brighter.\u003c\/li\u003e\n\u003cli\u003eThe underlying finish or wood species can affect the final color of light paint.\u003c\/li\u003e\n\u003cli\u003eDetails and inside corners are difficult to cover with any paint color, but it tends to be more noticeable with whites. This is a naturally occurring phenomenon in paint application and does not necessarily constitute a defect in the paint finish or your technique.\u003c\/li\u003e\n\u003cli\u003eThe more porous the paint, such as a chalk paint, the more likely that yellowing will occur. The topcoat is seeping through the spaces caused by the larger particles of filler that give Chalk Paints their texture.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTips to Prevent Yellowing\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eIf it is a low-use project, use a premium white paint that is self-sealing and does not require a topcoat. A clear topcoat is not required on \u003ca href=\".\/water-based-milk-paint-general-finishes-specialty-coatings\"\u003eGeneral Finishes Milk Paint\u003c\/a\u003e for increased durability, as it is a self-sealing, exterior-rated coating with high durability and chemical and water resistance. However, topcoats do provide a smooth surface that is easier to clean and boosts durability for high-use projects, such as tabletops and kitchen cabinets.\u003c\/li\u003e\n\u003cli\u003eUse a professional spray such as \u003ca href=\".\/white-water-based-poly-top-coat-general-finishes\"\u003eGeneral Finishes Enduro White Poly\u003c\/a\u003e. It has \"increased topcoat properties,\" is a standalone finish when 3 coats are applied, and does not require sealing with a topcoat.\u003c\/li\u003e\n\u003cli\u003eWe recommend using \u003ca href=\".\/stain-blocker-water-based-primer-general-finishes\"\u003eGeneral Finishes Stain Blocker\u003c\/a\u003e, an engineered chemical barrier, to prevent persistent bleed-through for interior-use projects.\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\".\/stain-blocker-water-based-primer-general-finishes\"\u003eStain Blocker\u003c\/a\u003er does not adhere to melamine cabinet veneers.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\".\/stain-blocker-water-based-primer-general-finishes\"\u003eStain Blocker\u003c\/a\u003e cannot be tinted.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eAlways test your project's ENTIRE finishing schedule (from cleaning to topcoat) on an inside door or a more hidden area of the piece. This will not help if the yellowing occurs later, but at least you will know if there is an immediate problem.\u003c\/li\u003e\n\u003cli\u003eAvoid painting period furniture, such as a 1940s serpentine mahogany desk, with light colors. The pieces were often finished in stain that contained aniline dyes, which cast a pinkish bleed-through under light paint. Not every piece of furniture is suitable for upcycling with a light paint color. Pine, mahogany, and furniture of the 1940s and 50s are a red flag.\u003c\/li\u003e\n\u003cli\u003eLast, not all manufacturers' topcoats are compatible with other finishes and may react with a color change. Always follow best practices by not rushing, and testing to your satisfaction first.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eKnots\u003c\/h4\u003e\n\u003cp\u003eKnots in wood tend to bleed and are dense, making paint and stain adhesion a challenge. \u003ca href=\".\/stain-blocker-water-based-primer-general-finishes\"\u003eStain Blocker\u003c\/a\u003e may improve adhesion and prevent bleed-through for painting projects. Pine knots are especially difficult to cover with white or light paints. If you decide to paint over them, apply 3 coats of Stain Blocker first; however, we cannot guarantee adhesion or bleed-through blockage. You are better off using a dark paint on pine.\u003c\/p\u003e\n\u003c!--\/.accordion-content--\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- End: Yellowing \u0026 Clear Topcoat -----------------------------------------------\u003e \u003c!-- Storage of Water-Based Products ---------------------------------------------------\u003e\n\u003carticle\u003e\n\u003ch4\u003eStorage of Water-Based Products\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cp\u003ePlease be mindful of the manner in which water-based products are stored and how long they have been in storage. They are not a forever product.\u003c\/p\u003e\n\u003ch4\u003eLife of Product\u003c\/h4\u003e\n\u003cp\u003eWater-based products do not last forever, even when unopened. General Finishes products are best used within 1 year of the manufacture date listed on the can. However, the life of the product may be extended with proper care and storage (see Storage Tips below).\u003c\/p\u003e\n\u003cp\u003eWater-based products can last 3-5 years if the can is unopened, in good condition and stored in correct temperatures.\u003c\/p\u003e\n\u003cp\u003eProduct that is 3 years old will not look like product that is 6 months to 1 year old. You will see more stratification or separation as the product ages. Always stir thoroughly before using.\u003c\/p\u003e\n\u003ch4\u003eFoul Smell\u003c\/h4\u003e\n\u003cp\u003eIf your product has a foul smell, it is contaminated and no longer in useable condition.\u003c\/p\u003e\n\u003ch4\u003eClumps \u0026amp; Settling\u003c\/h4\u003e\n\u003cp\u003eGravity can cause some solids to settle on the bottom of the can and slight separation on the top. This is normal. If working with older product stir with a paint mixing attachment on a drill.\u003c\/p\u003e\n\u003cp\u003eIf the solids dissolve and clumps smooth out after mixing from the bottom, the product is in good condition for use.\u003c\/p\u003e\n\u003cp\u003eInability to reincorporate large, chunky lumps after stirring for several minutes is an indication that the product has frozen and can no longer be used.\u003c\/p\u003e\n\u003ch4\u003eStorage Tips\u003c\/h4\u003e\n\u003cp\u003eWater-based finishes crystalize and form a skin due to evaporation when the air-tight seal on a can is broken at first use. The following best practices will increase the life of your product:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ePry open sealed lids with a paint can opener by hooking under the lid's rolled edge. The use of a screwdriver can disfigure the rim and lid, impairing a complete seal.\u003c\/li\u003e\n\u003cli\u003eKeep lid closed while working. Pour what you will use into a bowl, paper cup, or plate, and close can lid as you work.\u003c\/li\u003e\n\u003cli\u003eClean the chime of the can thoroughly with a paper towel before closing to create a complete seal. Product falling into the chime can be minimized by using a pouring lid, such as Fitsall. Avoid wiping used brushes on the lid.\u003c\/li\u003e\n\u003cli\u003ePound the lid in place using a rubber mallet to avoid distorting the chime or lid. Dents in the lid from direct contact with a hammer can impair a complete seal. Alternatively, place a flat piece of wood over can lid and firmly pound shut.\u003c\/li\u003e\n\u003cli\u003eStore in moderate temperatures. Avoid temperatures below 50°F\/10°C or above 100°F\/26°C. Keep from freezing. Frozen and heat-damaged product cannot be revitalized. Temperature-controlled spaces, such as a basement, are ideal for storage. Do not store product in an attic, garage, in direct sunlight, or next to something warm like a water heater or furnace.\u003c\/li\u003e\n\u003cli\u003eStore can upside down to create a liquid seal, minimize evaporation and reduce the chance of crystallization. Decant remaining product from the can before stirring.\u003c\/li\u003e\n\u003cli\u003eDecant leftovers to a smaller container when the finish is almost used up. Alternative storage containers for water-based products are plastic FIFO bottles or glass bottles. Do not fill metal-lidded containers completely to prevent them from rusting.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eThe following water-based product mistures can be stored:\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eProduct thinned with up to 15% \u003ca href=\".\/water-based-extender-general-finishes-additives\"\u003eGeneral Finishes Extender\u003c\/a\u003e or \u003ca href=\".\/water-based-accelerator-general-finishes-additives\"\u003eGeneral Finishes Accelerator\u003c\/a\u003e, with the exception of thinned \u003ca href=\".\/water-based-wiping-stain-general-finishes\"\u003eGeneral Finishes Water Based Wood Stain\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eMixtures involving colors \u0026amp; sheens within the same product line, such as:\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Performance Satin + High Performance Gloss\u003c\/li\u003e\n\u003cli\u003eSnow White Milk Paint + Coastal Blue Milk Paint\u003c\/li\u003e\n\u003cli\u003eAmber Dye Stain + Merlot Dye Stain\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eThe following product mixtures should NOT be stored:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAny water based product with thinned tap water; water often contains bacteria that will adversely affect stored paint.\u003c\/li\u003e\n\u003cli\u003eTopcoat + Stain or Paint\u003c\/li\u003e\n\u003cli\u003eMilk Paint + Chalk Style Paint\u003c\/li\u003e\n\u003cli\u003eWater Based Wood Stain + Dye Stain\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!--\/.accordion-content--\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- End: Storage of Water-Based Products -----------------------------------------------\u003e \u003c!-- Furniture Care and Maintenance ---------------------------------------------------\u003e\n\u003carticle\u003e\n\u003ch4\u003eFurniture Care \u0026amp; Maintenance\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003ch4\u003eCure First\u003c\/h4\u003e\n\u003cp\u003eYou have just finished applying a fine furniture finish. Treat gently until the paint or topcoat have fully cured. Allow 21 days for a water-based finish to cure and 30 days for an oil-based finish to cure before cleaning.\u003c\/p\u003e\n\u003ch4\u003eRegular Cleaning and Maintenance\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eRemove dust with a water-dampened cloth. Dust can build up over time and may scratch or dull finishes if not removed regularly.\u003c\/li\u003e\n\u003cli\u003eRemove fingerprints, cooking fumes and smoking residue with mild soap and water. These contaminants will not harm the finish, but they accumulate on surfaces and dull the original luster.\u003c\/li\u003e\n\u003cli\u003eAs with all fine furniture finishes, avoid using furniture polish, cleaners or dusting sprays that contain silicone, alcohol, ammonia and anything acidic. Exception: We have successfully cleaned with Clorox wipes.\u003c\/li\u003e\n\u003cli\u003eClean up water, alcohol and food spills in a timely manner and use placemats \u0026amp; coasters to protect the finish.\u003c\/li\u003e\n\u003cli\u003eFuture finishes or touch-ups may not adhere properly or perform as desired over a contaminated surface. Some contaminants, such as silicone, seep through finish into the wood and often cannot be removed.\u003c\/li\u003e\n\u003cli\u003eAvoid excessive exposure to direct sunlight, high temperatures or high humidity. These can damage furniture and finishes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!--\/.accordion-content--\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- End: Furniture Care and Maintenance -----------------------------------------------\u003e\n\u003c\/div\u003e\n\u003c!-- End Accordian: Instructions -----------------------------------------------\u003e","brand":"General Finishes","offers":[{"title":"Gallon \/ Flat","offer_id":8114259001463,"sku":"GF-LFG","price":96.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Satin","offer_id":8114258870391,"sku":"GF-LSG","price":96.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Semi-Gloss","offer_id":8114258804855,"sku":"GF-LSGG","price":96.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Gloss","offer_id":8114258935927,"sku":"GF-LGG","price":96.0,"currency_code":"USD","in_stock":true},{"title":"5 Gallon \/ Flat","offer_id":8114259034231,"sku":"GF-LF5G","price":406.0,"currency_code":"USD","in_stock":true},{"title":"5 Gallon \/ Satin","offer_id":8114258903159,"sku":"GF-LS5G","price":406.0,"currency_code":"USD","in_stock":true},{"title":"5 Gallon \/ Semi-Gloss","offer_id":8114258837623,"sku":"GF-LSG5G","price":406.0,"currency_code":"USD","in_stock":true},{"title":"5 Gallon \/ Gloss","offer_id":8114258968695,"sku":"GF-LG5G","price":406.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/7892\/files\/gf-product-render-WATER-BASED-TOPCOAT-ENDURO-PRE-CAT-LACQUER-flat-GALLON-CLOSED-v2-thick-banding-1000PX-general-finishes-2024.jpg?v=1730316134"},{"product_id":"water-based-extender-general-finishes-additives","title":"General Finishes Water Based Extender, Additives","description":"This water-based stain extender is a wetting additive used to improve flow and leveling. General Finishes' extender increases the drying time of any water-based stain, topcoat or glaze, which is helpful in hot, dry conditions.","brand":"General Finishes","offers":[{"title":"Pint","offer_id":8114259394679,"sku":"GF-EXPT","price":17.0,"currency_code":"USD","in_stock":true},{"title":"Gallon","offer_id":8114259427447,"sku":"GF-EXGA","price":68.0,"currency_code":"USD","in_stock":true},{"title":"5 Gallon","offer_id":8114259460215,"sku":"GF-EX5G","price":233.33,"currency_code":"USD","in_stock":true},{"title":"4 oz","offer_id":8114259492983,"sku":"GF-EX4","price":70.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/7892\/products\/expt.png?v=1658327087"},{"product_id":"pro-image-water-based-top-coat-general-finishes","title":"General Finishes Pro Image Water Based Top Coat","description":"\u003c!-- Start: Topcoat Description -----------------------------------------------\u003e\n\u003cp\u003eGeneral Finishes Pro Image Flooring Topcoat is a single-component urethane for\n  hardwood floors designed to be applied over Pro Floor Stains or Pro Sealer.\n  It is a durable, self-cross-linking urethane\/acrylic, making it a leader among\n  single-component technologies.\u003c\/p\u003e\n  \u003cp\u003ePlease click the below headers to reveal the instructional info for this product.\u003c\/p\u003e\n\u003c!-- Start Accordian: Instructions -----------------------------------------------\u003e\n\u003cdiv\u003e\n  \u003c!-- Step 1: Prep for Topcoat ---------------------------------------------------\u003e\n  \u003carticle\u003e\n\n    \u003ch4\u003eStep 1: Preparation for Pro Image Topcoat\u003c\/h4\u003e\n    \u003cdiv\u003e\n      \u003ch4\u003ePreparation for Application over Raw Wood\u003c\/h4\u003e\n      \u003col\u003e\n        \u003cli\u003eThe floor must be sanded properly using NWFA specifications, finishing\n          with a 120-grit screen. If this is not done correctly, the finish may\n          have visible scratch marks.\u003c\/li\u003e\n        \u003cli\u003eWater popping is optional and can slightly darken a floor. If you\n          water pop, you may apply General Finishes Pro Floor Stain immediately\n          because it is a water-based floor stain.\u003c\/li\u003e\n        \u003cli\u003eWhen dry, abrade with maroon pad and 240-grit strip or equivalent\n          abrasive. Vacuum thoroughly then wipe with water-damped towels.\u003c\/li\u003e\n      \u003c\/ol\u003e\n      \u003ch4\u003eIf Recoating an Existing Floor\u003c\/h4\u003e\n      \u003col\u003e\n        \u003cli\u003eClean off all wax, grease, and oils with an appropriate hardwood\n          floor cleaner or a 50|50 mix of denatured alcohol and water. \u003c\/li\u003e\n        \u003cli\u003eBuff the finish with a maroon pad and 240-grit strips.\u003c\/li\u003e\n        \u003cli\u003eVacuum all dust followed by wiping with a damp rag. \u003c\/li\u003e\n        \u003cli\u003eApply 1 or 2 coats of Pro Image.\u003c\/li\u003e\n        \u003cli\u003eA test area is recommended before applying to the full floor to check\n          for adhesion.\u003c\/li\u003e\n      \u003c\/ol\u003e\n      \u003c!--\/.accordion-content--\u003e\n    \u003c\/div\u003e\n  \u003c\/article\u003e\n  \u003c!-- End: Accordian Step 1 -----------------------------------------------\u003e\n\n  \u003c!-- Step 2: How to Apply Topcoat ------------------------------------------\u003e\n  \u003carticle\u003e\n  \u003ch4\u003eStep 2: How to Apply General Finishes Pro Image Topcoat\u003c\/h4\u003e\n  \u003cdiv\u003e\n  \u003ch4\u003eGeneral Finishes Pro Image Flooring Topcoat Application Steps\u003c\/h4\u003e\n  \u003cp\u003eIMPORTANT: Record moisture meter readings in several places before applying\n    Pro Image. These readings will provide a benchmark at later stages to determine\n    when the floor is dry enough to apply another coat of finish.\u003c\/p\u003e\n  \u003col\u003e\n    \u003cli\u003eStir to reincorporate solids that have settled to the bottom of the can\n      before and throughout the application process. Do not shake topcoat.\u003c\/li\u003e\n    \u003cli\u003eIf desired, add \u003ca href=\".\/water-based-extender-general-finishes-additives\"\u003eGeneral Finishes Extender\u003c\/a\u003e to improve flow and leveling\n      and increase open time, helpful in hot, dry climates. Add no more than\n      4-8 ounces per gallon.\u003c\/li\u003e\n    \u003cli\u003eApply 2-3 liberal coats of Pro Image using a T-Bar with mohair cover,\n      pad applicator or microfiber roller at a rate of 500-600 square feet per\n      gallon. Wipe along the grain using smooth, even strokes and avoid pressure\n      and back-brushing. Light lapmarks will self-level as the finish dries.\u003c\/li\u003e\n    \u003cli\u003eDry 2-4 hours in ideal conditions, 70°F\/20°C; 50% humidity, or until\n      the moisture meter readings return to their original numbers.\u003c\/li\u003e\n    \u003c\/ol\u003e\n\u003cul\u003e\n      \u003cli\u003eIf conditions are dry and warm, decrease or restrict the amount of\n        airflow. Also, increase the application rate and block direct sunlight\n        when possible by closing shades or blinds.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cli\u003eBuffing: If applying a second coat or third coat within 24 hours of \n      applying Pro Image, buffing is not required. If applying after 24 hours, \n      buff first with a maroon pad and 240-grit sandpaper strips, or a 3M Hi \n      Pro Pad or equivalent.\u003c\/li\u003e\n    \u003cli\u003eRemove dust thoroughly with a vacuum followed by wiping with a water-dampened \n      rag before re-coating.\u003c\/li\u003e\n    \u003cli\u003eNOTE: Many closed-grain woods, such as maple, walnut, and cherry, may \n      only require 1 seal coat and 2 finish coats. Most open-grain woods, such \n      as oaks and ash, will need 2 seal coats to increase the build of the \n      finish and improve the final result.\u003c\/li\u003e\n  \n  \u003ch4\u003eImmediate Use of Floors Finished With Pro Image\u003c\/h4\u003e\n  \u003cul\u003e\n    \u003cli\u003eFloors may be carefully walked on, in socks only, after six hours.\u003c\/li\u003e\n    \u003cli\u003eYou can replace furniture in 3 days, and rugs in 10 days.\u003c\/li\u003e\n    \u003cli\u003eBe cautious during the first 10 days, when the finish is more susceptible \n      to scratching and scuff marks.\u003c\/li\u003e\n    \u003cli\u003ePlace heavy furniture on carpet pads.\u003c\/li\u003e\n  \u003c\/ul\u003e\n    \u003c!--\/.accordion-content--\u003e\n  \u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- End: Accordian Step 2 -----------------------------------------------\u003e\n\n\u003c!-- Storage of Pro Flooring Products ---------------------------------------------------\u003e\n\u003carticle\u003e\n\n  \u003ch4\u003eStorage of Pro Flooring Products\u003c\/h4\u003e\n  \u003cdiv\u003e\n  \u003ch4\u003eLife of Product\u003c\/h4\u003e\n  \u003cp\u003eWater-based products do not last forever, even when unopened. General Finishes \n    products are best used within 1 year of the manufacture date listed on the \n    container. The life of the product may be extended with proper care and \n    storage.\u003c\/p\u003e\n  \u003ch4\u003eStorage Tips\u003c\/h4\u003e\n  \u003cp\u003eThe following best practices will increase the life of your product:\u003c\/p\u003e\n  \u003col\u003e\n    \u003cli\u003eKeep the containers closed after decanting what you need.\u003c\/li\u003e\n    \u003cli\u003eStore in moderate temperatures. Avoid temperatures below 50°F\/10°C or \n      above 100°F\/26°C. Frozen and heat-damaged product cannot be revitalized. \n      Temperature-controlled spaces, such as a basement, are ideal for storage. \n      Do not store product in an attic, garage, in direct sunlight, or next to \n      something warm like a water heater or furnace.\u003c\/li\u003e\n    \u003cli\u003eDecant leftovers to a smaller container when the finish is almost used up. \n      Alternative storage containers for water-based products are plastic FIFO \n      bottles or glass bottles. Do not fill metal-lidded containers completely \n      to prevent them from rusting.\u003c\/li\u003e\n  \u003c\/ol\u003e\n  \u003ch4\u003eThe following water-based product mixtures can be stored:\u003c\/h4\u003e\n  \u003cul\u003e\n    \u003cli\u003eProduct thinned with up to 15% \u003ca href=\".\/water-based-extender-general-finishes-additives\"\u003eGeneral Finishes Extender\u003c\/a\u003e.\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003ch4\u003eThe following product mixtures should NOT be stored:\u003c\/h4\u003e\n  \u003cul\u003e\n    \u003cli\u003eAny water-based product thinned with tap water. Water often contains \n      bacteria that will adversely affect stored paint.\u003c\/li\u003e\n  \u003c\/ul\u003e\n    \u003c!-- \/.accordion-content --\u003e\n  \u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- End: Storage of Pro Flooring Products -----------------------------------------------\u003e\n\n\u003c!-- Floor Care and Maintenance ---------------------------------------------------\u003e\n\u003carticle\u003e\n\n  \u003ch4\u003eFloor Care and Maintenance\u003c\/h4\u003e\n  \u003cdiv\u003e\n  \u003ch4\u003eUsage Restrictions after Final Coat of Topcoat is Applied\u003c\/h4\u003e\n  \u003cp\u003eImmediate Use of Floors Finished With Sealer: Floors may be carefully \n    walked on, in socks only, after six hours.\u003c\/p\u003e\n  \u003cp\u003eIntermediate Use: You can replace furniture in 3 days, and rugs in 10 days. \n    Be cautious during the first 10 days, when the finish is more susceptible to \n    scratching and scuff marks. Place heavy furniture on carpet pads.\u003c\/p\u003e\n    \u003cp\u003eCure Time: Water-based finishes cure for full use in 21 days.\u003c\/p\u003e\n    \u003c!-- \/.accordion-content --\u003e\n  \u003c\/div\u003e\n\u003c\/article\u003e\n\u003c!-- End: Floor Care and Maintenance -----------------------------------------------\u003e\n\n\u003c\/div\u003e\n\u003c!-- End Accordian: Instructions -----------------------------------------------\u003e","brand":"General Finishes","offers":[{"title":"Gallon \/ Semi-Gloss","offer_id":8114261426295,"sku":"GF-PISGG","price":143.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Satin","offer_id":8114261491831,"sku":"GF-PISG","price":143.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/7892\/products\/isgg.png?v=1577706358"},{"product_id":"water-based-pre-stain-wood-conditioner-general-finishes","title":"General Finishes Water Based Pre-Stain Wood Conditioner","description":"\u003cp\u003eGeneral Finishes Water Based Wood Stains are formulated to provide workability similar to oil-based stains. They spread easily, can be repaired and have plenty of open time. The thicker formula of these wood stains allows for controlled penetration. Their high-quality pigments produce rich, dark, uniform colors on hard-to-stain woods like maple and pine. Low odor, low VOC, water cleanup and noncombustible.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Quart \/ Natural","offer_id":30326886301763,"sku":"GF-WSNQ","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Pint \/ Natural","offer_id":30326886334531,"sku":"GF-WSNP","price":25.5,"currency_code":"USD","in_stock":false},{"title":"Gallon \/ Natural","offer_id":30326886367299,"sku":"GF-WSNG","price":88.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/7892\/products\/water-pre-stain-conditioner.png?v=1578680096"},{"product_id":"water-based-brushable-white-enamel-general-finishes","title":"General Finishes Water Based Brushable White Enamel","description":"","brand":"General Finishes","offers":[{"title":"Quart \/ Satin","offer_id":30326888595523,"sku":"GF-QES","price":44.0,"currency_code":"USD","in_stock":false},{"title":"Quart \/ Flat","offer_id":31694123434051,"sku":"GF-QEF","price":38.13,"currency_code":"USD","in_stock":false},{"title":"Gallon \/ Satin","offer_id":30326888628291,"sku":"GF-GES","price":112.93,"currency_code":"USD","in_stock":false},{"title":"Gallon \/ Flat","offer_id":31694123466819,"sku":"GF-GEF","price":90.93,"currency_code":"USD","in_stock":false},{"title":"Quart \/ Semi-Gloss","offer_id":30326888661059,"sku":"GF-QESG","price":44.0,"currency_code":"USD","in_stock":false},{"title":"Gallon \/ Semi-Gloss","offer_id":30326888693827,"sku":"GF-GESG","price":112.93,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/7892\/products\/brushable-white-enamel.png?v=1578600907"},{"product_id":"water-based-glaze-clear-base-finish-effects-general-finishes","title":"General Finishes Water Based Glaze Clear Base, Finish Effects","description":"\u003cp\u003eGlaze Effects Clear Mixing Base is the base General Finishes uses to make their glazes. A colored glaze is a small amount of colorant carried in a clear glaze base. Mix with Water Based Wood Stains, Milk Paints, Chalk Style Paints and Pearl Effects to create custom stains and glazes.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Clear Base \/ Quart","offer_id":31345194303555,"sku":"GF-GCBQ","price":34.0,"currency_code":"USD","in_stock":true},{"title":"Clear Base \/ Pint","offer_id":31345194336323,"sku":"GF-GCBP","price":21.0,"currency_code":"USD","in_stock":false},{"title":"Clear Base \/ Gallon","offer_id":31345194369091,"sku":"GF-GCBG","price":74.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/7892\/products\/clear-base-glaze-effects.png?v=1578594106"},{"product_id":"water-based-dye-stain-reducer-general-finishes","title":"General Finishes Water Based Dye Stain Reducer","description":"\u003cspan\u003eDye Stain Reducer is the clear base we use when manufacturing General Finishes Dye Stain and can be used to make custom Dye Stain colors and for toning.\u003c\/span\u003e","brand":"General Finishes","offers":[{"title":"Quart \/ Reducer","offer_id":31345277403203,"sku":"GF-DSRDQ","price":28.0,"currency_code":"USD","in_stock":true},{"title":"Pint \/ Reducer","offer_id":31345277435971,"sku":"GF-DSRDP","price":19.6,"currency_code":"USD","in_stock":false},{"title":"Gallon \/ Reducer","offer_id":31345277468739,"sku":"GF-DSRDG","price":64.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/7892\/products\/dye-stain-reducer.png?v=1578601656"},{"product_id":"clear-2k-poly-top-coat-water-based-general-finishes","title":"General Finishes Clear 2K Poly Top Coat, Water Based (Catalyst Included)","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eSuperior water-based Enduro Tintable 2K Polys made in Wisconsin for professional, industrial, and OEM users. We hope you try it out; you’ll like it.\u003c\/p\u003e\n\u003cp\u003eThe term 2K references a product that is a 2-component polyurethane specifically catalyzed with Isocyanate to crosslink the polymer fully, which provides superior performance 1K coatings hardened PolyAzuradine or Carbodiiamide. To create Enduro Tintable 2K, General Finishes tested over 30 polymers, resins, and other ingredients sourced from around the world. These new coatings are engineered to prevent the biggest frustrations for today's professional, industrial and OEM users providing ultimate durability for interior\/exterior use. General Finishes goes hard for great chemistry, so you don't have to worry when your clients are tough on the paint. Paired with Tintable 2K Clear Poly, you have a dynamic duo of 2 component finishes, the most durable interior\/exterior coatings General Finishes has ever created. You can apply confidently, knowing that you are giving your customer the best the industry offers. Perfect for new or remodeled cabinets, furniture, woodwork, pre-primed steel, fiberglass, and exterior projects. Made in the U.S.A.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKEY FEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eEase of application\u003c\/strong\u003e. Whether in a shop or on-site, Enduro 2K is designed to\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eflow and level\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efor Professionals\/Industrial users that apply with AAA, HVLP, Airless, or flatline systems.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eTintable\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eto any major manufacturer's color deck. Enduro 2K hits the deepest darks, the bright whites, and everything in between. General Finishes recommends ColourFal Zero colorants.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHigher gloss standards\u003c\/strong\u003e for white and clear, with 90+ degrees on a 60-degree angle.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eFast production time\u003c\/strong\u003e: You can spray 3-4 coats of Enduro 2K and sand in between coats in one day. Enduro 2K cures for use in 5 days.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eFast film build:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEnduro 2K'S are engineered with a combo of larger and smaller-sized resin particles, which, when combined with the catalyst, allows for a thicker, quicker film build than any 1K. It provides a better vertical hang when spraying built-in surfaces on-site, with fewer drips or sags.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eWater and chemical resistance:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCombining our new resin with catalyzation allows Enduro 2K to hit a commercial level of water and chemical resistance that *exceeds industry requirements and guidelines”. This is the perfect coating to stand the test of time on Wisconsin bar tops.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eExcellent adhesion properties\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eon properly cleaned and prepped wood, plastics, fiberglass, and pre-rimed steel. (It Sticks).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eExterior use:\u003c\/strong\u003e\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eThis new finish has an unusual balance of durability and flexibility, making it the professional’s choice for outdoor projects such as doors, benches, furniture, and tables. Do not use on deck surfaces.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eConsistency\u003c\/strong\u003e. General Finishes prides itself on superior quality control to meet and exceed the customer’s expectations.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eAvailable in Flat, Satin, Semi-gloss, and Gloss.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Gallon \/ Flat","offer_id":40438446653507,"sku":"GF-2KCFG","price":154.0,"currency_code":"USD","in_stock":true},{"title":"5-Gallon \/ Flat","offer_id":40438446686275,"sku":"GF-2KCF5G","price":720.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Satin","offer_id":40438446751811,"sku":"GF-2KCSG","price":154.0,"currency_code":"USD","in_stock":true},{"title":"5-Gallon \/ Satin","offer_id":40438446817347,"sku":"GF-2KCS5G","price":720.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Semi-Gloss","offer_id":40438446915651,"sku":"GF-2KCSGG","price":154.0,"currency_code":"USD","in_stock":true},{"title":"5-Gallon \/ Semi-Gloss","offer_id":40438446981187,"sku":"GF-2KCSG5G","price":720.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Gloss","offer_id":40438447013955,"sku":"GF-2KCGG","price":154.0,"currency_code":"USD","in_stock":true},{"title":"5-Gallon \/ Gloss","offer_id":40438447079491,"sku":"GF-2KCG5G","price":720.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/7892\/files\/gf-product-render-WATER-BASED-TOPCOAT-ENDURO-2K-CLEAR-POLY-flat-GALLON-CLOSED-v2-thick-banding-1000PX-general-finishes-2024.jpg?v=1730313219"},{"product_id":"white-2k-poly-top-coat-water-based-general-finishes","title":"General Finishes White 2K Poly Top Coat, Water Based (Catalyst Included)","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eSuperior water-based Enduro Tintable 2K Polys made in Wisconsin for professional, industrial, and OEM users. We hope you try it out; you’ll like it.\u003c\/p\u003e\n\u003cp\u003eThe term 2K references a product that is a 2-component polyurethane specifically catalyzed with Isocyanate to crosslink the polymer fully, which provides superior performance 1K coatings hardened PolyAzuradine or Carbodiiamide. To create Enduro Tintable 2K, General Finishes tested over 30 polymers, resins, and other ingredients sourced from around the world. These new coatings are engineered to prevent the biggest frustrations for today's professional, industrial and OEM users providing ultimate durability for interior\/exterior use. General Finishes goes hard for great chemistry, so you don't have to worry when your clients are tough on the paint. Paired with Tintable 2K Clear Poly, you have a dynamic duo of 2 component finishes, the most durable interior\/exterior coatings General Finishes has ever created. You can apply confidently, knowing that you are giving your customer the best the industry offers. Perfect for new or remodeled cabinets, furniture, woodwork, pre-primed steel, fiberglass, and exterior projects. Made in the U.S.A.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKEY FEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eEase of application\u003c\/strong\u003e. Whether in a shop or on-site, Enduro 2K is designed to\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eflow and level\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efor Professionals\/Industrial users that apply with AAA, HVLP, Airless, or flatline systems.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eTintable\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eto any major manufacturer's color deck. Enduro 2K hits the deepest darks, the bright whites, and everything in between. General Finishes recommends ColourFal Zero colorants.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHigher gloss standards\u003c\/strong\u003e for white and clear, with 90+ degrees on a 60-degree angle.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eFast production time\u003c\/strong\u003e: You can spray 3-4 coats of Enduro 2K and sand in between coats in one day. Enduro 2K cures for use in 5 days.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eFast film build:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEnduro 2K'S are engineered with a combo of larger and smaller-sized resin particles, which, when combined with the catalyst, allows for a thicker, quicker film build than any 1K. It provides a better vertical hang when spraying built-in surfaces on-site, with fewer drips or sags.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eWater and chemical resistance:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCombining our new resin with catalyzation allows Enduro 2K to hit a commercial level of water and chemical resistance that *exceeds industry requirements and guidelines”. This is the perfect coating to stand the test of time on Wisconsin bar tops.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eExcellent adhesion properties\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eon properly cleaned and prepped wood, plastics, fiberglass, and pre-rimed steel. (It Sticks).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eExterior use:\u003c\/strong\u003e\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eThis new finish has an unusual balance of durability and flexibility, making it the professional’s choice for outdoor projects such as doors, benches, furniture, and tables. Do not use on deck surfaces.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eConsistency\u003c\/strong\u003e. General Finishes prides itself on superior quality control to meet and exceed the customer’s expectations.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eAvailable in Flat, Satin, Semi-gloss, and Gloss.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Gallon \/ Flat","offer_id":40438446719043,"sku":"GF-2KWFG","price":165.0,"currency_code":"USD","in_stock":true},{"title":"5-Gallon \/ Flat","offer_id":40438446784579,"sku":"GF-2KWF5G","price":738.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Satin","offer_id":40438446882883,"sku":"GF-2KWSG","price":165.0,"currency_code":"USD","in_stock":true},{"title":"5-Gallon \/ Satin","offer_id":40438446948419,"sku":"GF-2KWS5G","price":738.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Semi-Gloss","offer_id":40438447046723,"sku":"GF-2KWSGG","price":165.0,"currency_code":"USD","in_stock":true},{"title":"5-Gallon \/ Semi-Gloss","offer_id":40438447112259,"sku":"GF-2KWSG5G","price":738.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Gloss","offer_id":40438447145027,"sku":"GF-2KWGG","price":165.0,"currency_code":"USD","in_stock":true},{"title":"5-Gallon \/ Gloss","offer_id":40438447177795,"sku":"GF-2KWG5G","price":738.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/7892\/files\/gf-product-render-WATER-BASED-PIGMENTED-TOPCOAT-ENDURO-2K-WHITE-POLY-flat-GALLON-CLOSED-v2-thick-banding-1000PX-general-finishes-2024.jpg?v=1730316513"},{"product_id":"enduro-pro-series-poly-urethane-clear-top-coat-general-finishes","title":"General Finishes Enduro Pro Series Poly Urethane Clear Top Coat","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eGeneral Finishes Enduro Pro Series Clear Polyurethane is a single-component, self-cross linking polyurethane\/acrylic topcoat designed for fast build with excellent flow and leveling.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003ePriced competitively for the professional and industrial markets, Pro Series Clear is tintable and meets or exceeds KCMA standards. Recommended use is interior cabinets, trim, doors, and furniture. Use over raw, stained, or primed wood substrates.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eStep 1\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eAll wood projects require preparation sanding.\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eIf you skip this critical step, your finish may fail. \u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003e\n\u003cstrong\u003eRaw wood\u003c\/strong\u003e \u003c\/h3\u003e\n\u003cp\u003e1. Sand no finer than 220 grit. \u003c\/p\u003e\n\u003cp\u003e2. Remove dust.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNew Stained Surface:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eDo not sand. Apply directly to the stained surface.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003ePre-Finished Wood \u0026amp; Sealed Surfaces \u003c\/strong\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eScuff clean with a non-woven abrasive pad \u0026amp; 50:50 mix of denatured alcohol \u0026amp; water.\u003cstrong\u003e \u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eDry 1-2 hours.\u003c\/li\u003e\n\u003cli\u003eSand lightly with 220-320-grit sanding sponge.\u003cstrong\u003e  \u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eRemove Dust\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eOther Substrates: Interior MDF, HDF, \u0026amp; Masonite\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCan be used with proper preparation \u0026amp; priming. Always test first.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eStep 2\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCAUTION:\u003c\/strong\u003e Do NOT use topcoat over\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eGF Pro Series White\u003cspan\u003e \u003c\/span\u003e\u003c\/em\u003eor any other white or light paints such as\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eGF Milk Paint,\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003eor\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eGF White Poly\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003eas it may cause yellowing. Any clear coat can become reactive over wood substrates or existing finishes, causing tannin or dye bleed-though regardless of priming. All of GF's white paints are self-sealing and do NOT require a topcoat.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2023-10\/gf-catalog-professional-brochure-v14-WEB-READY-general-finishes-2023-09-27_1.pdf\" rel=\"noopener\" target=\"_blank\"\u003e\u003cstrong\u003eDownload 2023 Professional Water Based Product Catalog here.\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eGeneral Finishes Enduro Professional Topcoat Application Steps\u003c\/strong\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eSettling is natural. Stir thoroughly to reincorporate solids that have settled to the bottom of the can before and throughout the application process. Do not shake. \u003c\/li\u003e\n\u003cli\u003eTest for adhesion when applying over an existing finish. \u003c\/li\u003e\n\u003cli\u003eThin as desired with distilled water; start with 5%, adding up to 10% by volume. \u003c\/li\u003e\n\u003cli\u003eIncrease open time, if needed, with 10-15%\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003ca data-entity-substitution=\"canonical\" data-entity-uuid=\"ebbb3a87-a7bb-4e13-be3c-7b3213f69bea\" data-entity-type=\"node\" title=\"Enduro Water Based Extender\" href=\"\/products\/water-based-extender-general-finishes-additives\"\u003e\u003cstrong\u003eGeneral Finishes Extender\u003c\/strong\u003e\u003c\/a\u003e if allowed by local regulations. GF Extender will improve flow and leveling and increase open time, which is helpful in dry climates. \u003cstrong\u003eCalifornia Residents:\u003c\/strong\u003e Adding more than 2% of GF Extender will make the products non-compliant per SCAQMD Regulations. GF assumes no liability for the improper use of these products.    \u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eReady to spray from the container. Ready to spray from the container. Apply 2-3 coats.\u003cstrong\u003e \u003c\/strong\u003eWear NIOSH-approved respiratory \u0026amp; eye protection.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpray application:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eBefore spraying, strain topcoat through a fine-mesh filter. Spray wet films at 3-5-mil thickness. Medium air cap. Compressed air: 0.40, HVLP: 1.1mm-1.5mm. Air Assisted Airless: 300-400 PSI pump, 20 PSI assist air, .011\" - 013\" tip or Airless Fine Finish .007\"-.011\". Verify tip sizes with your equipment supplier.\u003cspan\u003e \u003c\/span\u003e\u003ca data-entity-substitution=\"media\" data-entity-uuid=\"869be810-b770-41c1-a5f5-3e1ae54c6c5e\" data-entity-type=\"media\" title=\"Spray Tip Size Recommendations 2010\" href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2021-06\/gf-info-sheet-spray-tip-size-recommendations-v5-general-finishes-2021-06-14.pdf\" rel=\"noopener\" target=\"_blank\"\u003eSee the General Finishes general guide for spray tip sizes.\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eKeep your gun at a 90° angle, 6-8\" from the surface. On large, flat areas, use wet, even patterns 6-8\" wide. For narrow surfaces, reduce the fan pattern to 2-3\" wide to reduce overspray. Overlap each pass 25% to conceal lines. Wear a mask and work in a ventilated space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRespiratory protection:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e​​\u003c\/strong\u003eBased on the hazard and potential for exposure, select a respirator that meets the appropriate standard or certification. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace frames on cabinets\u003c\/strong\u003e: Enduro professional products are engineered to be spray-only but can be successfully applied to cabinet face frames or edges with a pad or small, cabinet-specific roller, such as Whizz Velour brand. Larger areas may not level with a hand application. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\n\u003cli\u003eIf a faster build is desired over raw wood, use 1 or 2 coats\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"Enduro Sanding Sealer\" href=\"\/products\/water-based-sanding-sealer-general-finishes\" rel=\"noopener\" target=\"_blank\"\u003eEnduro Sanding Sealer\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e. 3-4 total coats of finish are recommended.\u003c\/li\u003e\n\u003cli\u003eFinish sand between coats with 220-320 grit sanding sponge to improve smoothness and adhesion.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eWarning: \u003c\/strong\u003eDo not use water-based products with Linseed Oils or Danish Oils.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eDry Time\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDry Time Based on ideal conditions of 70°F 21°C; 50% humidity.  \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eTo touch: 10+ minutes\u003c\/p\u003e\n\u003cp\u003eReady to Sand: 30-40 minutes\u003c\/p\u003e\n\u003cp\u003eRecoat: 1-2 hours\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBe sure to allow adequate dry time. \u003c\/strong\u003eYou can tell if a water-based finish is dry if it forms a powder when lightly sanded with a fine-grade (220-320) foam sanding pad or 400-grit sandpaper. If in doubt, wait longer. Rushing the dry time can cause \"blush,\" which is clouding in the finish due to moisture trapped between the layers.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIncrease dry time if:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHumidity is over 80%\u003c\/li\u003e\n\u003cli\u003eTemperatures are cooler.\u003c\/li\u003e\n\u003cli\u003e3+ coats are applied\u003c\/li\u003e\n\u003cli\u003eThick coats are applied\u003c\/li\u003e\n\u003cli\u003eApplying over an existing sealed finish\u003c\/li\u003e\n\u003cli\u003eApplying over products from other brands\u003c\/li\u003e\n\u003cli\u003eLayering General Finishes water- and oil-based products:\n\u003cul\u003e\n\u003cli\u003eWater over oil: Let oil-based products dry 72+hr before applying water-based products\u003c\/li\u003e\n\u003cli\u003eOil over water: Let water-based products dry 24+hr before applying oil-based products\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eTo accelerate dry time in humid conditions, add\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"\/products\/water-based-accelerator-general-finishes-additives\" rel=\"noopener\" target=\"_blank\"\u003e\u003cstrong\u003eGeneral Finishes Accelerator\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand work in a space with good ventilation and air movement. If you decide to re-coat before the recommended time, test dryness.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eCompliance with Air Regulations\u003c\/h2\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eComplies with the following air quality regulations:  \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSCAQMD, CARB, Canada, OTC Phase I \u0026amp; Phase II\u003c\/span\u003e\u003c\/p\u003e\n\u003c!----\u003e","brand":"General Finishes","offers":[{"title":"Gallon \/ Flat","offer_id":41485266255939,"sku":"GF-PROCFG","price":78.0,"currency_code":"USD","in_stock":true},{"title":"5-Gallon \/ Flat","offer_id":41485266354243,"sku":"GF-PROCF5G","price":294.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Satin","offer_id":41485266419779,"sku":"GF-PROCSG","price":78.0,"currency_code":"USD","in_stock":true},{"title":"5-Gallon \/ Satin","offer_id":41485266485315,"sku":"GF-PROCS5G","price":294.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Semi-Gloss","offer_id":41485266550851,"sku":"GF-PROCSGG","price":78.0,"currency_code":"USD","in_stock":true},{"title":"5-Gallon \/ Semi-Gloss","offer_id":41485266583619,"sku":"GF-PROCSG5G","price":294.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/7892\/files\/gf-product-render-WATER-BASED-TOPCOAT-ENDURO-PRO-SERIES-POLYURETHANE-CLEAR-flat-GALLON-CLOSED-v2-thick-banding-1000PX-general-finishes-2024.jpg?v=1717007168"},{"product_id":"enduro-pro-series-poly-urethane-white-top-coat-general-finishes","title":"General Finishes Enduro Pro Series Poly Urethane White Top Coat","description":"\u003cp\u003e\u003cspan\u003eGeneral Finishes Enduro Pro Series White Polyurethane is a single-component, self-cross linking polyurethane\/acrylic topcoat designed for fast build with excellent flow and leveling.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003ePriced competitively for the professional and industrial markets, Pro Series Clear is tintable and meets or exceeds KCMA standards. Recommended use is interior cabinets, trim, doors, and furniture. Use over raw, stained, or primed wood substrates.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eStep 1\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eAll wood projects require preparation sanding.\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eIf you skip this critical step, your finish may fail. \u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003e\n\u003cstrong\u003eRaw wood\u003c\/strong\u003e \u003c\/h3\u003e\n\u003cp\u003e1. Sand no finer than 220 grit. \u003c\/p\u003e\n\u003cp\u003e2. Remove dust.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNew Stained Surface:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eDo not sand. Apply directly to the stained surface.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003ePre-Finished Wood \u0026amp; Sealed Surfaces \u003c\/strong\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eScuff clean with a non-woven abrasive pad \u0026amp; 50:50 mix of denatured alcohol \u0026amp; water.\u003cstrong\u003e \u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eDry 1-2 hours.\u003c\/li\u003e\n\u003cli\u003eSand lightly with 220-320-grit sanding sponge.\u003cstrong\u003e  \u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eRemove Dust\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eOther Substrates: Interior MDF, HDF, \u0026amp; Masonite\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCan be used with proper preparation \u0026amp; priming. Always test first.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eStep 2\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCAUTION:\u003c\/strong\u003e Do NOT use topcoat over\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eGF Pro Series White\u003cspan\u003e \u003c\/span\u003e\u003c\/em\u003eor any other white or light paints such as\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eGF Milk Paint,\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003eor\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eGF White Poly\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003eas it may cause yellowing. Any clear coat can become reactive over wood substrates or existing finishes, causing tannin or dye bleed-though regardless of priming. All of GF's white paints are self-sealing and do NOT require a topcoat.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2023-10\/gf-catalog-professional-brochure-v14-WEB-READY-general-finishes-2023-09-27_1.pdf\" rel=\"noopener\" target=\"_blank\"\u003e\u003cstrong\u003eDownload 2023 Professional Water Based Product Catalog here.\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eGeneral Finishes Enduro Professional Topcoat Application Steps\u003c\/strong\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eSettling is natural. Stir thoroughly to reincorporate solids that have settled to the bottom of the can before and throughout the application process. Do not shake. \u003c\/li\u003e\n\u003cli\u003eTest for adhesion when applying over an existing finish. \u003c\/li\u003e\n\u003cli\u003eThin as desired with distilled water; start with 5%, adding up to 10% by volume. \u003c\/li\u003e\n\u003cli\u003eIncrease open time, if needed, with 10-15%\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003ca data-entity-substitution=\"canonical\" data-entity-uuid=\"ebbb3a87-a7bb-4e13-be3c-7b3213f69bea\" data-entity-type=\"node\" title=\"Enduro Water Based Extender\" href=\"\/products\/water-based-extender-general-finishes-additives\"\u003e\u003cstrong\u003eGeneral Finishes Extender\u003c\/strong\u003e\u003c\/a\u003e if allowed by local regulations. GF Extender will improve flow and leveling and increase open time, which is helpful in dry climates. \u003cstrong\u003eCalifornia Residents:\u003c\/strong\u003e Adding more than 2% of GF Extender will make the products non-compliant per SCAQMD Regulations. GF assumes no liability for the improper use of these products.    \u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eReady to spray from the container. Ready to spray from the container. Apply 2-3 coats.\u003cstrong\u003e \u003c\/strong\u003eWear NIOSH-approved respiratory \u0026amp; eye protection.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpray application:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eBefore spraying, strain topcoat through a fine-mesh filter. Spray wet films at 3-5-mil thickness. Medium air cap. Compressed air: 0.40, HVLP: 1.1mm-1.5mm. Air Assisted Airless: 300-400 PSI pump, 20 PSI assist air, .011\" - 013\" tip or Airless Fine Finish .007\"-.011\". Verify tip sizes with your equipment supplier.\u003cspan\u003e \u003c\/span\u003e\u003ca data-entity-substitution=\"media\" data-entity-uuid=\"869be810-b770-41c1-a5f5-3e1ae54c6c5e\" data-entity-type=\"media\" title=\"Spray Tip Size Recommendations 2010\" href=\"https:\/\/generalfinishes.com\/sites\/default\/files\/documents\/files\/2021-06\/gf-info-sheet-spray-tip-size-recommendations-v5-general-finishes-2021-06-14.pdf\" rel=\"noopener\" target=\"_blank\"\u003eSee the General Finishes general guide for spray tip sizes.\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eKeep your gun at a 90° angle, 6-8\" from the surface. On large, flat areas, use wet, even patterns 6-8\" wide. For narrow surfaces, reduce the fan pattern to 2-3\" wide to reduce overspray. Overlap each pass 25% to conceal lines. Wear a mask and work in a ventilated space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRespiratory protection:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e​​\u003c\/strong\u003eBased on the hazard and potential for exposure, select a respirator that meets the appropriate standard or certification. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace frames on cabinets\u003c\/strong\u003e: Enduro professional products are engineered to be spray-only but can be successfully applied to cabinet face frames or edges with a pad or small, cabinet-specific roller, such as Whizz Velour brand. Larger areas may not level with a hand application. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\n\u003cli\u003eIf a faster build is desired over raw wood, use 1 or 2 coats\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"Enduro Sanding Sealer\" href=\"\/products\/water-based-sanding-sealer-general-finishes\" rel=\"noopener\" target=\"_blank\"\u003eEnduro Sanding Sealer\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e. 3-4 total coats of finish are recommended.\u003c\/li\u003e\n\u003cli\u003eFinish sand between coats with 220-320 grit sanding sponge to improve smoothness and adhesion.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eWarning: \u003c\/strong\u003eDo not use water-based products with Linseed Oils or Danish Oils.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eDry Time\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDry Time Based on ideal conditions of 70°F 21°C; 50% humidity.  \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eTo touch: 10+ minutes\u003c\/p\u003e\n\u003cp\u003eReady to Sand: 30-40 minutes\u003c\/p\u003e\n\u003cp\u003eRecoat: 1-2 hours\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBe sure to allow adequate dry time. \u003c\/strong\u003eYou can tell if a water-based finish is dry if it forms a powder when lightly sanded with a fine-grade (220-320) foam sanding pad or 400-grit sandpaper. If in doubt, wait longer. Rushing the dry time can cause \"blush,\" which is clouding in the finish due to moisture trapped between the layers.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIncrease dry time if:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHumidity is over 80%\u003c\/li\u003e\n\u003cli\u003eTemperatures are cooler.\u003c\/li\u003e\n\u003cli\u003e3+ coats are applied\u003c\/li\u003e\n\u003cli\u003eThick coats are applied\u003c\/li\u003e\n\u003cli\u003eApplying over an existing sealed finish\u003c\/li\u003e\n\u003cli\u003eApplying over products from other brands\u003c\/li\u003e\n\u003cli\u003eLayering General Finishes water- and oil-based products:\n\u003cul\u003e\n\u003cli\u003eWater over oil: Let oil-based products dry 72+hr before applying water-based products\u003c\/li\u003e\n\u003cli\u003eOil over water: Let water-based products dry 24+hr before applying oil-based products\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eTo accelerate dry time in humid conditions, add\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"\/products\/water-based-accelerator-general-finishes-additives\" rel=\"noopener\" target=\"_blank\"\u003e\u003cstrong\u003eGeneral Finishes Accelerator\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand work in a space with good ventilation and air movement. If you decide to re-coat before the recommended time, test dryness.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eCompliance with Air Regulations\u003c\/h2\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eComplies with the following air quality regulations:  \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSCAQMD, CARB, Canada, OTC Phase I \u0026amp; Phase II\u003c\/span\u003e\u003c\/p\u003e\n\u003c!----\u003e\u003c!----\u003e","brand":"General Finishes","offers":[{"title":"Gallon \/ Flat","offer_id":41485266223171,"sku":"GF-PROWFG","price":102.0,"currency_code":"USD","in_stock":true},{"title":"5-Gallon \/ Flat","offer_id":41485266288707,"sku":"GF-PROWF5G","price":404.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Satin","offer_id":41485266321475,"sku":"GF-PROWSG","price":102.0,"currency_code":"USD","in_stock":true},{"title":"5-Gallon \/ Satin","offer_id":41485266387011,"sku":"GF-PROWS5G","price":404.0,"currency_code":"USD","in_stock":true},{"title":"Gallon \/ Semi-Gloss","offer_id":41485266452547,"sku":"GF-PROWSGG","price":102.0,"currency_code":"USD","in_stock":true},{"title":"5-Gallon \/ Semi-Gloss","offer_id":41485266518083,"sku":"GF-PROWSG5G","price":404.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/7892\/files\/gf-product-render-WATER-BASED-PIGMENTED-TOPCOAT-ENDURO-PRO-SERIES-POLYURETHANE-WHITE-flat-GALLON-CLOSED-v2-thick-banding-1000PX-general-finishes-2024.jpg?v=1717007793"}],"url":"https:\/\/procabinetsupply.com\/collections\/water-based-products.oembed?page=2","provider":"Pro Cabinet Supply","version":"1.0","type":"link"}