How To Measure for Handle Pulls

How To Measure for Handle Pulls
Beau Ueland
The job of a homeowner is never done. You often have to stress over running the household, but you also need to worry about home upgrades. If you want to update your kitchen in a simple way, you can try installing new hardware for the cabinetry. This includes things like hinges, knobs, and handle pulls for the doors and drawers. Here is how to measure for handle pulls so that your cabinets look brand-new.

Measure the Pulls

The first thing you should do is establish the measurements for the hardware you will install. You need to find out the length and width of the pull. You also have to measure the projection; this refers to how far the handle will stick out from the drawer or door. The larger the projection, the more room you have for your hand or fingers.

From Scratch

If you have to start from scratch, this means your cabinet has no pulls or handles. People recommend using a pull no more than one-third of the height and width of the drawer. This prevents the handle or pull from looking lopsided and out of place. Start by measuring the length of the drawer and complete your measurements from there. Find the location of the mid-point to make sure everything is even and level.

Replacing Hardware

Replacing the hardware of a kitchen cabinet is much easier than measuring from scratch. If the new pull handle has the same dimensions as the previous hardware, you can simply take the old one out and put in the new one. Even if you don’t like the style of the handles on your cabinets, try to replace them with something similar.

For more help or information on how to measure for handle pulls, contact the kitchen cabinetry experts at Pro Cabinet Supply. We offer a huge selection of the best cabinet building supplies on the market, and we have the know-how to make your next upgrade project a breeze.

Recently viewed


This article has no comments yet