Festool 577986 OFKC 500 Cordless Edge Router Set EB-Basic
Festool 577986 OFKC 500 Cordless Edge Router Set EB-Basic
SKU: SKU: FT-577986
The Festool OFKC 500 Cordless Edge Router delivers tangled-cord-free routing in a slim 2.90 lb body you control with one hand. Dial in cutting depth in exact 1/256 in (0.1 mm) increments while spindle-mounted cutters and a tilt-proof base produce clean, rework-free edges. The 18V set arrives in a Systainer SYS3 M with an R3 roundover bit, ball-bearing guide, and dust-extraction attachment, ready for roundovers, 45-degree chamfers, and flush edge trimming.
Description
Description
Cut the cord, not the corners. The Festool OFKC 500 Cordless Edge Router brings 18V freedom to edge profiling, roundovers, chamfers, and flush trimming in a slim, 2.90 lb body you guide confidently with one hand. A well-balanced center of gravity and cutters matched precisely to the base opening keep the router tilt-proof, so every pass stays straight and clean with no rework required. Dial in your cutting depth in exact 1/256 in (0.1 mm) increments and let the spindle-mounted cutter deliver maximum run-out accuracy for a genuinely flawless finish. As part of Festool's 18V cordless platform, it shares the same battery system as the rest of your Festool cordless tools, so there's one less cord and one more reason to build better.
- Cordless 18V design for tangled-cord-free workflows and instant start with just a few quick settings
- Fine-tune cutting depth in exact 1/256 in (0.1 mm) increments for flawless, rework-free alignment
- Cutter mounted directly on the spindle maximizes run-out accuracy for a clean finish
- Cutters perfectly matched to the base opening keep the router stable and tilt-proof
- Lightweight and slim at 2.90 lbs (1.3 kg) for comfortable one-hand control
- Variable idle speed of 10,000 to 25,000 RPM to match the material and bit
- Routing depth fine-adjustment range of 13/32 in (10 mm); accepts bits up to 1-1/16 in (27 mm)
- Flush ball-bearing attachment keeps the profile low for tighter clearances in rabbets and confined spaces
- 1-1/16 in (27 mm) dust extraction connection ties into Festool's extraction system for clean cutting
- Arrives in a Systainer SYS3 M 187 for organized storage and transport
Description
Description
Cut the cord, not the corners. The Festool OFKC 500 Cordless Edge Router brings 18V freedom to edge profiling, roundovers, chamfers, and flush trimming in a slim, 2.90 lb body you guide confidently with one hand. A well-balanced center of gravity and cutters matched precisely to the base opening keep the router tilt-proof, so every pass stays straight and clean with no rework required. Dial in your cutting depth in exact 1/256 in (0.1 mm) increments and let the spindle-mounted cutter deliver maximum run-out accuracy for a genuinely flawless finish. As part of Festool's 18V cordless platform, it shares the same battery system as the rest of your Festool cordless tools, so there's one less cord and one more reason to build better.
- Cordless 18V design for tangled-cord-free workflows and instant start with just a few quick settings
- Fine-tune cutting depth in exact 1/256 in (0.1 mm) increments for flawless, rework-free alignment
- Cutter mounted directly on the spindle maximizes run-out accuracy for a clean finish
- Cutters perfectly matched to the base opening keep the router stable and tilt-proof
- Lightweight and slim at 2.90 lbs (1.3 kg) for comfortable one-hand control
- Variable idle speed of 10,000 to 25,000 RPM to match the material and bit
- Routing depth fine-adjustment range of 13/32 in (10 mm); accepts bits up to 1-1/16 in (27 mm)
- Flush ball-bearing attachment keeps the profile low for tighter clearances in rabbets and confined spaces
- 1-1/16 in (27 mm) dust extraction connection ties into Festool's extraction system for clean cutting
- Arrives in a Systainer SYS3 M 187 for organized storage and transport
Add to cart
-
Quantity1