Virutex Portable, Hot Air Edgebander is the only manual bander with tracking of tape on the board. It's suitable for use with most types of preglued edging, easily applying pre-glued PVC, polyester, melamine, and wood veneer of up to 2" wide (50mm).

This light weight portable edgebander has long proved to be popular for site and workshop alike.

The unit applies heat direct to preglued edging material ensuring the best possible application and bonding. A set of rubber clamps hug the board so you can get the most accurate tracking of the tape on the board. This hand held portable edgebander is perfect for circular and shaped pieces with a minimum internal radius of 20mm. Its easy adjustment and application makes it the best portable edgebander on the market.

It's supplied with practical edge trimming system.  Set up time is less than one minute. Two step temperature switch: Step one: 300C or 570F; Step two: 525C or 1,000F. Air delivery: 400 L/min. or 16 CV. feet/min.

Model AG98E has the same features as edgebander AG98F (tape up to 1 mm), but with extra lap banding guide, which allows to edgeband the internal sides of doors, grooves or jamb cut outs. Virutex also produces other models with more capacities: AG98R is a portable edgebander that can apply preglued edge up to 3 mm thick (with pre-cut strips).

• Insulation Type: Double Insulation
• Input Power: 1500 Watts
• Max. Edgebanding Width: 2" (50 mm)
• Min. Edging Thickness: 0.4 mm
• Max. Edging Thickness: 1 mm
• Temperature I: 570F (300°C)
• Temperature II: 1000F (525°C)
• Air Delivery: 16 CV feet/min (400 l/min)
• Weight: 6 lbs (2.7 kg)