Stock Location(s)
Description
Description
| SKU | Diameter (D) | Cutting Length (I) | Total Length (L) | Shank Diameter (S) | Number of Cutting Edges (Z) | Material (MAT) | Rotation (RH-LH) |
|---|---|---|---|---|---|---|---|
| 806.064.11 | 1/4" | 1" | 2-1/2" | 1/4" | 2 | HW | RH |
| 806.095.11 | 3/8" | 1" | 2-11/16" | 1/4" | 2 | HW | RH |
| 806.095.11-X10 | 3/8" | 1" | 2-11/16" | 1/4" | 2 | HW | RH |
| 806.096.11 | 3/8" | 1/2" | 2-3/16" | 1/4" | 2 | HW | RH |
| 806.096.11-X10 | 3/8" | 1/2" | 2-3/16" | 1/4" | 2 | HW | RH |
| 806.127.11 | 1/2" | 1" | 2-25/32" | 1/4" | 2 | HW | RH |
| 806.127.11-X10 | 1/2" | 1" | 2-25/32" | 1/4" | 2 | HW | RH |
| 806.128.11 | 1/2" | 1/2" | 2-9/32" | 1/4" | 2 | HW | RH |
| 806.227.11 | 1/2" | 1" | 2-25/32" | 1/4" | 3 | HW | RH |
| 806.627.11 | 1/2" | 1" | 3-13/32" | 1/2" | 2 | HW | RH |
| 806.627.11-X10 | 1/2" | 1" | 3-13/32" | 1/2" | 2 | HW | RH |
| 806.628.11 | 1/2" | 1/2" | 2-25/32" | 1/2" | 2 | HW | RH |
| 806.629.11 | 1/2" | 1-1/2" | 3-45/64" | 1/2" | 2 | HW | RH |
| 806.630.11 | 1/2" | 2" | 4-3/32" | 1/2" | 2 | HW | RH |
| 806.690.11 | 3/4" | 2" | 4-5/16" | 1/2" | 2 | HW | RH |
| 806.691.11 | 3/4" | 1" | 3-7/16" | 1/2" | 2 | HW | RH |
| 806.692.11 | 3/4" | 1-1/2" | 3-11/16" | 1/2" | 2 | HW | RH |
| 806.191.11 | 3/4" | 1" | 2-15/16" | 1/4" | 2 | HW | RH |
We have designed a series of truly indispensable bits available in a wide range of sizes for your woodworking needs.
For precision work on laminates or quick template work with excellent finishing.
SHOP TIPS: these bits are excellent for making through mortises. Use a straight bit (#711.130.11) to groove the through mortise area, then use the drill bit (#517.130.31) to bore a through hole at the end of the groove.
Turn the workpiece over to end the mortise. Use the flush trim bit with a cutting length slightly longer than the fillet, following the groove made on the opposite side of the workpiece with the ball bearing guide.
SHOP TIPS: undersized bearing to use after resharpening.
791.062.00 Ø9,3 replace bearing 791.002.00 (Ø9,5) after resharpening.
791.063.00 Ø12,5 replace bearing 791.003.00 (Ø12,7) after resharpening.
706.064.11 - HWM 806.064.11 - HWM
906.693.11 WARNING!
Long cutting edge. Carefully make several shallow passes to prevent damaging the tool. The warranty does not cover improper or incorrect use of the tool.
