CMT Flush Trim Router Bit

Description

SKU	Diameter (D)	Cutting Length (I)	Total Length (L)	Shank Diameter (S)	Number of Cutting Edges (Z)	Material (MAT)	Rotation (RH-LH)
806.064.11	1/4"	1"	2-1/2"	1/4"	2	HW	RH
806.095.11	3/8"	1"	2-11/16"	1/4"	2	HW	RH
806.095.11-X10	3/8"	1"	2-11/16"	1/4"	2	HW	RH
806.096.11	3/8"	1/2"	2-3/16"	1/4"	2	HW	RH
806.096.11-X10	3/8"	1/2"	2-3/16"	1/4"	2	HW	RH
806.127.11	1/2"	1"	2-25/32"	1/4"	2	HW	RH
806.127.11-X10	1/2"	1"	2-25/32"	1/4"	2	HW	RH
806.128.11	1/2"	1/2"	2-9/32"	1/4"	2	HW	RH
806.227.11	1/2"	1"	2-25/32"	1/4"	3	HW	RH
806.627.11	1/2"	1"	3-13/32"	1/2"	2	HW	RH
806.627.11-X10	1/2"	1"	3-13/32"	1/2"	2	HW	RH
806.628.11	1/2"	1/2"	2-25/32"	1/2"	2	HW	RH
806.629.11	1/2"	1-1/2"	3-45/64"	1/2"	2	HW	RH
806.630.11	1/2"	2"	4-3/32"	1/2"	2	HW	RH
806.690.11	3/4"	2"	4-5/16"	1/2"	2	HW	RH
806.691.11	3/4"	1"	3-7/16"	1/2"	2	HW	RH
806.692.11	3/4"	1-1/2"	3-11/16"	1/2"	2	HW	RH
806.191.11	3/4"	1"	2-15/16"	1/4"	2	HW	RH

We have designed a series of truly indispensable bits available in a wide range of sizes for your woodworking needs.

For precision work on laminates or quick template work with excellent finishing.

SHOP TIPS: these bits are excellent for making through mortises. Use a straight bit (#711.130.11) to groove the through mortise area, then use the drill bit (#517.130.31) to bore a through hole at the end of the groove.

Turn the workpiece over to end the mortise. Use the flush trim bit with a cutting length slightly longer than the fillet, following the groove made on the opposite side of the workpiece with the ball bearing guide.

SHOP TIPS: undersized bearing to use after resharpening.

791.062.00 Ø9,3 replace bearing 791.002.00 (Ø9,5) after resharpening.

791.063.00 Ø12,5 replace bearing 791.003.00 (Ø12,7) after resharpening.

706.064.11 - HWM 806.064.11 - HWM

906.693.11 WARNING!

Long cutting edge. Carefully make several shallow passes to prevent damaging the tool. The warranty does not cover improper or incorrect use of the tool.