High-Performance Industrial Strength Contact Adhesive

EverStrong™ ES10+ aerosol adhesive is a high-performance industrial contact adhesive formulated to comply with 2017 CARB Regulations. Water resistant and temperature resistant to over 200°F, ES10+ is designed for bonding a wide range of substrates to include decorative laminates and veneers, fiberglass, glass, upholstery, fabrics, foam, auto headliners, cork and particle board.

Product Usage

EverStrong™ ES10+ is designed to be applied to both surfaces about to be joined. Spray an even coat of adhesive with at least 80% to 100% coverage of each surface. Allow to dry 3-5 minutes til tacky. Place the surfaces together and apply pressure evenly across the full bonding surface. For best results: Make sure that the surfaces are dry and free from dirt, grease or oil. Ensure that the adhesives and substrates are at 60°F or higher. If surfaces are porous, a second coat is recommended after the first has dried and become tacky.

Storage

Recommended to store off the floor if temperatures below 60°F.

Physical Properties

Appearance: Liquid, clear or red
Specific Gravity: .75 - .85 g/cc
Shear Adhesion: >100psi and >200°F
Spray Pattern: Web Spray
Flammability: Flammable per ASTM E-681-04
VOC: 35-45% by weight, 300 - 310 g/cc
Shelf Life: 15 months
Freezing: Not damaged by freezing but return to room temp before use.