NewStar Adhesives EverStrong ESW10 Water Based Contact Adhesive

Superior adhesive products like EverStrong ESW10 from NewStar Adhesives is a versatile, robust water based contact adhesive designed to provide strong permanent bonds on a wide range of materials to include decorative laminates and veneers, fiberglass, glass, cork, particle board and foam. It will not attack cells in expanded styrene and other foam materials. Water resistant and temperature resistant to over 200°F. Suitable for most postforming applications.

Key Features

- Robust, Easy to Use
- EverStrong™ Bonds
- High Temperature Resistance
- Non-Flammable
- LEED Compliant
- SCAQMD and OTC Compliant
- Postformable

Product Usage

EverStrong™ ESW10 is designed to be applied to both surfaces about to be joined. Spray or roll an even coat of adhesive on both surfaces. Allow to tack. Place the surfaces together and apply pressure evenly across the full bonding surface. For best results: Make sure that the surfaces are dry and free from dirt, grease or oil. Ensure that the adhesives and substrates are at 60°F or higher.

Storage

Store in clean, dry area. Protect from freezing.

Physical Properties

Appearance: Liquid, white or red
Base: Synthetic polymers
Solvent: Water based, no solvents
Solids 43.0 - 47.0%
Density: 8.80 - 9.20 lb/gl
Flash point: none
Shelf Life: 12 months (unopened)
Freezing: Protect from freezing.

Packaging

ESW10-001C(R) 4-1 gal Pails
ESW10-005C(R) 5 gal Pail
ESW10-055C(R) 55 gal Drum
All available in Clear (C) or Red (R)