Festool 576118 TS 75 EQ-F-Plus Plunge Cut Track Saw

Experience the incredible power of the TS 75 plunge cut saw. No other saw comes close to its power and pinpoint accuracy. Capable of cutting material that is 2-3/4" thick, this saw will leave an edge that is both burn and splinter-free, creating edges that are clean enough to glue without any further prep work. The TS 75 is suitable for cutting solid doors, truing rough lumber, cutting out window frames, and a host of other applications. Save time and create matched panels by cutting stacked sheet goods with one cut. Try the TS 75 once, and you will never look back.

• When used with Festool guide rails, you can achieve perfectly straight and splinter-free cuts.
• Spring-loaded riving knife (splitter) keeps the cut kerf open so that the material does not pinch the blade. This reduces the chance of kickback.
• The slip clutch helps to minimize the risk of a kickback and minimizes wear on the blade, gear case, and motor.
• Blade changes are easier and safer using the FastFix system which locks switch and arbor simultaneously for easy arbor bolt removal.

• Brand: Festool
• Product Line: Festool Sawing, Festool Track Saws
• Category: Track Saw
• Idle engine speed: 1350 - 4400 RPM
• Cable length: 13.12 ft (4 m)
• Saw blade diameter: 8-1/4” (210 mm)
• Drive type: 120 VAC
• Cutting depth at 45°: 2-1/8” (55 mm)
• Dust extraction connection dia.: 1-1/16"/1-7/16" (27/36 mm)
• Power consumption: 1600 watt
• Cutting depth: 0"-3” (0-75 mm)
• Angular range: 0-47°